Search the Community
Showing results for tags 'CD-READER'.
hello people, i am trying to install windows nt 4. but, i have some problems, and i was hoping you could help me. the problem is happening while setuping the windows. i have windows nt 4 installation cd, and when i insert it, it starts booting, it loads all drivers and stuff, and then it shows windows name, version, memory, processors, and after that screen, windows nt crashes. it displays blue screen of death (bsod) with error title inaccessible_boot_device. before this, i had problem with auto rebooting, before reaching this screen where windows name version and stuff are shown, but i fixed this by changing some settings in basic input output system (bios). since this is happening in the first stage of setup, it means that after windows loads cd driver, that this driver is no longer able to read from installation cd. before this driver is loaded, everything works fine. so, i am trying to figure out what is the problem here? can you please help me. i have gigabyte ga-p35-ds3p motherboard. this is relatively new motherboard. i already runned tests in virtual machine inside windows 10. and the same installation cd works fine, and windows nt 4 installs normal inside this virtual machine. i tried creating virtual machine and selecting windows nt 4 from the menu, and everything works fine. if i try creating new virtual machine and selecting windows 10 for example from the menu, and installing windows nt 4 on this virtual machine, the same thing happens like on my real computer. setup crashes. after modifying settings of virtual machine, in cpu area, and later after modifying the storage controller in those settings, i was able to make this virtual machine working fine. what i did was that i changed machine storage controller from sata to ide controller. so, i figured out that windows nt 4 drivers does not support sata disks, only ide disks. and this is the cause. as you probably assume (since i am running windows 10 on the same computer), this computer is a relatively new computer, and it is intended primary for sata disks. howewer, there is one ide port on the motherboard. and, while atempting setup, i moved cd to that one cd drive which is ide. i have one cd drive which is ide and which is connected to the ide port, not the sata one. i atempted installation, but still the same problem happens. windows nt 4 can not access this disk after it loads its own drivers. i have also tried changeing some settings in bios, but this does not help much. so my question is, how come that windows nt 4 can not access my cd drive, when i moved it on the ide port, and by doing the same thing in virtual machine after experiencing the same problem, this action fixed the problem in the virtual machine? what i need to do to make it run on my real hardware? i mentioned my motherboard model a few paragraphs earlyer, so if anyone knows this motherboard, it might know the answer. thanx, any suggestions are welcome. bye