stimpee

I just got this exact same error but looking at my list of hotfixes I dont see the 928090 in there. I did however see the 933566 and 929969 IE7 fixes so i removed those and now I'm having another attempt at writing. Using WUD to download the full list of post-SP2 fixes, removing all the IE7 hotfixes then integrating with nLite. EDIT: And now it worked just fine. I also removed the IE7 compatibility check box.

Is there a way to put in a word + random string as computer name? i.e. MACH-XXXX MACH*

Selected all the critical updates, went to download and it just stops after KB926255 and gives this message: --------------------------- Windows Updates Downloader --------------------------- The remote server returned an error: (404) Not Found. --------------------------- OK --------------------------- Looking in the main window I can see that the downloaded components have green boxes and the next component is KB923689 and that is the one not downloading. By skipping it, theres no further problems. Just a heads up. Using latest english ul 2007-06-12 and WUD 2.25

Just trying to get a fresh system disc updated and I noticed that the site was down. The WUD 2.25 build is available elesewhere but the ULZ files seem to be only available on the WUD site. Is there an mirror of these downloads anywhere? Or is this a moot point? Does the updater work if the WUD site is down?

just a quick note that Microsoft have said that RIS isnt a supported feature in XP/2003 and that this is one of the known bugs on some hardware. It will be fixed for Vista. I guess I'll have to see if our MSDN subscription includes Windows Longhorn Server Beta 2 and test it from there.

Well it seems like no-one here can help but I did "solve" the problem by hotswapping a hard disk from the working servers into all the ones with the wrong boot.ini's and copying the boot.ini over it. The RIS image had installed properly so it just required a reboot then. Of course, this defies the usefulness of RIS if you have to do stuff in the server room by hand....

This is just a standard RIS image of a w2k3 OS on a network RIS server with the SAS drivers added to the SIF and a PXE boot setup to find the image on bootup. As far as I know, boot.ini is created on install and I just need to stop it from using signature and use multi. Until today I didnt even know what AutoRIS and AutoImage were (they do look handy tho).

The image for the OS is on the RIS server in normal directory structure not a binary image so the BINL service shouldnt matter should it? I havent looked at AutoRIS in depth as it looks a bit more complex and overkill for whats needed here. This is the drivers section added to the .sif: [MassStorageDrivers] "LSI Logic Fusion-MPT SAS Driver (XP x64)"="OEM" [OEMBootFiles] lsi_sas.sys lsi_sas.inf sxpam64.cat txtsetup.oem (yes I know theyre winxp x64 not w2k3 but they work, as proved on the other 2 installs)

I'm trying to install W2k3 via RIS on some Sun X4100 rackmounts. These have got LSI Logic 1064 serial SCSI controllers in them and are running AMD64 Opterons. After the RIS remotely installs the OS, upon reboot I get this message: "Windows could not start because of a computer disk hardware configuration problem. Could not read from selected boot disk. Check boot path and disk hardware. Please check the Windows documentation about hardware disk configuration and your hardware disk configuration and your hardware reference manuals for additional information. Boot Failed." Basically, the only things added to the SIF file are the drivers for the SAS disks. I have 10 machines to install this on and for 2 of them there were no problems (identical hardware) which is why its also confusing that it doesnt work on the others. This happened each time I performed a RIS installation. I assumed that it was a hardware problem so I ran it on two other servers with the same results. After some internet searching I found hints that it might be something to do with the boot.ini and booting up with a Linux bootcd I found that the boot.ini looked like this: [boot loader] timeout=30 Default= signature(c400c400)disk(2)rdisk(0)partition(1)\Windows [operating systems] signature(3892r94)disk(0)rdisk(0)partition(1)\WINDOWS="Windows Server 2003 Enterprise Edition" Rather than showing "multi(0)...\Windows", its using signature(c400c400) and after a further search I found the following MS kb article: http://support.microsoft.com/?kbid=227704. This indicated a problem with INT13 which just isnt the case and the SCSI bios is not disabled. There is only one drive in there so I've no idea where the disk(2) came from. The solution I can think of to temporarily get around this is to use a bootdisk and manually edit the boot.ini or use RiPrep from one of the successful installs to use as an image for the others. Either way is certainly not a good solution. Can anyone help with this and force the RIS to make a boot.ini with multi(0)disk(0) instead of signature(c400c400)disk(2)?

This looks promising. When the latest 98SE2ME and usb drivers get added in along with making some installs optional it could become an all in one. Whats the install order of the stuff? Bearing in mind the SP2 install guide thread.

i would recommend fumbling your way thru like me then asking the questions you dont know the answer to on here. Though I'm sure a lot of the info is here in the forums if you do a search for it.

thanks for your answers... why do i always leave it so late at night to post replies? Anyway, this new XPCREATE is much easier to use than the last version I used months ago. However, although it created the ISO, it didnt burn it (it said it had). No problem, because i burned later. And yes I did have DOCD=YES in the ini. now to bed... (02:32am)

Thanks for the reply GM. 1. Ive got the files i need now and am putting them in FILESCD\$OEM$\$1\DRIVERS\ (the files are iastor.sys, iastor.cat, iastor.inf and txtsetup.oem) I hope this works. Dont want to be pressing F6. Am i right in thinking that XPCREATE searches for IASTOR.sys anywhere in the $OEM$ 2. Remembered the IEXPRESS method on your page. BTW, the link to the page is wrong on you sidebar (it says iexjave.htm not iexjava.htm) and the text in the document refers the MDAC_TYP not SunJava. 3. In that case, I guess I can live with MDAC 2.7 SP1 Refresh too as I dont want to do any rebooting either. Does that require repackaging with IEXPRESS and putting in SVC-EXE? 4. Moved the file over to SVC-POS... 5. is there a place for the registry files?

While not a complete newbie to this slipstreaming/XPCREATE XP cd generating lark, i only create a CD about every 3 months or so and this time seem to have forgotten a lot of stuff. Looking at my dormant XPCREATE folder hasnt helped much and I havent found the info i need with the search button... What I've basically done so far is use Jono's tool to download all the hotfixes, then freshly re-installed XPCREATE and moved the fixes to the folders (No XP cd files copied yet). 1. The SATA thread didnt answer this so I'll ask here: Ive got an Intel 82801ER chipset (Asus P4P800) and I've downloaded the Intel® Application Accelerator RAID Edition [iAAR353_ENU.EXE]. Now what do I do with it? Do I just whack the exe in the FILESCD\$OEM$\$1\DRIVERS\ folder (or $OEM$, $OEM$\$$?) as is or do i need to unpack it? If I unpack it, I'm left with a "Disk 1" folder and the setup.exe and cab files (which dont open). Is this even the right file? There's also a floppy setup that just includes the basic driver but I'd have to make a floppy (it wont unpack otherwise) and then copy the files back to the HD. 2. Other questions (which I should have remembered): XPCREATE seems to have rapidly evolved (folders changed!) and now I'm not sure where to put the Sun Java package (there was a repackaged version available somewhere too - where?). So which folder do I put that in? 3. In a similar vein, where does MDAC_TYP.exe go? (these two files were left over in my old XPCREATE folder). 4. Jono's utility seems to have done the job but there are 5 files in the SVC-HF2 folder and 4 listed on GM's page. Q837009.exe is surplus here. I'm wondering if this is the OE6.0sp1-KB837009-x86-ENU.exe that belongs in SVC-POS (which is currently empty)? 5. One more: I have a reg tweaks .reg file. Where do I put that? I'm sure these questions have been answered before but the answers are not on GMs site and I couldnt find it here so I apologise if youre repeating yourselves... EDIT: I found some info on the drivers forum (typical) here and now have the 4 files (cat, inf, sys and oem). This should be part of the problem...

haha sorry... i posted something, then realised i was completely wrong so i tried to blank the post but it wouldnt recognise * so i put **...