daph4ntom

@ VeryDesperateFellow I had a pair of Maxtor SATA2 disks and I had LOADS of problems with RAID (and without) I actually returned them and got some WDs instead, this would be my recommendation! The firmware upgrade does take some time to get. There is a guy called Augustus in this thread who may email it to you? http://forums.overclockers.co.uk/showthread.php?t=17536240 D.

Fernando, I think I have figured out the problem. My machine is overclocked and when I reverted back to my original no OC config from the "CMOS Reloaded" in the BIOS. I did not get the BSOD after Windows finished setup, I got into windows and then just finished the setup. I then OC-ed it again and it appears to be working. (fingers crossed) Thanks for your help. B) D. Unfortunately I have got so many coasters now that have no blanks left to do a proper NLite CD with all drivers installed, oh well!

HELP! Guys, I have been trying to create an Nlite ISO to help me integrate the NVidia RAID drivers and have had no end of trouble. BSODs, CD just halting etc. I have 2 x WD 200GB SATA Disks in RAID 0, the BIOS and RAID settings are fine. I just cannot get a proper NLITE ISO createdand running to put Windows 2003 x64 R2 on my machine. I have v4.84 of Nvidia RAID. The array is healthy and shows up fine. I did a F6 install and it worked fine until it BSOD on me. Have followed the instructions at the start of this thread but no joy. My last attempt with v6.67 of the 2K3 drivers ran fine and after restart and GUI bit blue screened Non-RAID configuration worked fine. Any help would be appreciated. D. (DFI NF4 Lanparty Ultra-D)