Jeronimo
Content Type
Profiles
Forums
Events
Posts posted by Jeronimo
-
-
Beside 1 issue I had with my batch-file I have had another go on the final version of Home Premium (Dutch) I bought 2 days ago. I do need to perform the installation 1 final time, but it seems to work great. ISO is a bit, smaller but the wim-file is abou the same size.
0 -
@franner: batch-file updated
@dridzz: You are using these commands by hand, I think what you should do is replace %%i by %i (at least twice!) in each "for-loop". When using it in a batch file it needs to be %%i, when manually entered on the prompt %i. Using rd on wildcards does not work, that is why I created a for-loop in the first place.
0 -
@Rommsey: I make use of findings by other people and try to share that information here, if you look through my starter topic you will notice I do not use the word guide anywhere. I also state that I can only check the issues Cr4z33 is having when I have my own local version of Windows 7. Finally for someone with only 12 posts on this forum I think you should ease up a little, you have contributed next to nothing to this community and I suggest you adjust your tone as it is quite provoking.
0 -
@Rommsey: I intended to share my findings here and to make it easier for others where possible, I had/have no intention of writing a step-by-step guide.
@Cr4z33: sorry but I am not going to look through your entire batch file to see if there might be a mistake in it.
@frabber: thanks, starter post updated
0 -
Errorlevels are not that problematic, you need to know how they work. It is always a greater than check (if errorlevel 1) or a lower than check (if not errorlevel X).
If you want to check on errorlevel 0:
if not errorlevel 1 ..
If you want to check on errorlevel 1 or higher:
if errorlevel 1 ...
Check the help (help if) for further information.
0 -
@gendouhydeist: I used the one delivered with vLite and I would use the one from Windows Vista AIK SP1 if I would need it now.
@Cr4z33: I do not even need to check, I now I always use mountrw in my batch-file and never mount.
0 -
@gendouhydeist: I do not understand the complete question , but as my opening post states, Vista SP1 WAIK should be used (and that is what I am using).
0 -
@SausageHack:
echo 1 do this
echo 2 do that
echo 0 do nothing
choice /C 120 /N /M "Make your choice"
if errorlevel 3 goto exit
if errorlevel 2 goto dothat
if errorlevel 1 goto dothisSee help on choice and errorlevel for proper usage.
0 -
@ricktendo64: please discuss this in a sperate topic as it is not directly related to the guid I provided (on the subject: I can only state the obvious components).
@iceangel89: You need WAIK from Vista SP1, see main post not sure if it is WAIK 1.1. Build 7600 is the final build limited to certain Microsoft subscriptions. Everyone else will have to wait or check elsewhere (no discussions on this here). Editing the removal.bat is something you know or you learn (google for guides).
0 -
@gendouhydeist: I will check for winsxs what the ownership is. Maybe we can explain it from there. I would rather know why it does not work before trying some random solution.
0 -
@Junior2613: No that is no issue, the removal might be better to check if the files exists before performing the actual removal, but it is fine for me as it is.
On a side note: I do not think vLite will get a successor from nuhi as both his domains are down (nliteos.com and vlite.net).
edit: guess I was wrong, read here.
0 -
@mena_mon: normally I would agree, but this guide is more or less commanline stuff. It is provided as is, images will not be added
@gendouhydeist: I have performed dozens of these removal actions on 4 or 5 different builds and never did I need to take ownership of the files.
@Junior2613: you are correct, I updated the removal batch file
@iceangel89:
packages is what you get from dism
Microsoft-Windows-Client-Features-Package is a package that onvolves a lot of vLite-components
Other vlite components are those components in vLite that I can not link to a package
The 4 columns are related (per record), the last 2 need to be seen seperate
N-edition is a "European"-edition without IE, WMP and such.
Blank means I keep the packages for certain reasons (not removable, required)
vLite mean removed by vLite with my preset, dism means removed in my removal batch-file.
Hope this clears things up.
0 -
@cybpsych: within Ultimate you can perform the langpack action on the online-installation if you have the language pack. Otherwise you can not.
0 -
@kawe: I saw it, but I will not participate in illegal distribution.
@Cr4z33: sorry, but I can only help you out once I have my own non-English release. I had no issues when integrating Dutch, removing English and that performing the additional actions.
0 -
@neity: google will give you this link for example
When you are installing a package in an offline image, the package state is “install pending” because of pending online actions. In other words, the package will be installed when the image is booted and the online actions are processed. If subsequent actions are requested, they cannot be processed until the previous pending online action is completed.0 -
@Cr4z33: I only had this once with a VHD-image that was merged into an 7100 ISO-installation. In other words the image was tampered with and not received through regular channels.
0 -
My best gess would be:
Reliability and Performance Monitor
Windows event log
Performance Counters
Windows error reporting
0 -
You should mount the image (see elsewhere in this forum)
You should use the install_wim_tweak (see elsewhere in this forum).
Only after this you can use:
"<LOCATION-OF-DISM>\dism.exe" /get-packages /mount:"<LOCATION-OF-MOUNT>"
Without install_wim_tweak you will only see around 6 packages.
You can also do it for your current installation:
"<LOCATION-OF-DISM>\dism.exe" /get-packages /online
Please note:
Not sure if you would see all packages
You can not use install_wim_tweak from your current installation afaik (as far as I know).
0 -
@icemanx: just check the most recent topics that are opened by by me dead0 and SausageHack. If you think finding the topic is hard, then wait till you try and get the iso-size down to 500M: I doubt it is even possible without crippling Windows.
0 -
@dridzz: you set the localtiopn for dism incorrect, registry removal should be forced (fixed), some check not done correctly (fixed).
redownload the removal.bat
0 -
I also had this on a rare occasion, but not sure what the reason was. I had such errors a lot more frequent after selecting the ISO-folder after startup.
0 -
I updated my post. A week or 2 back I was not able to reply or update my post. When I tried at a later date I must have forgotten to put the correct link and version. Windows 7 AIK does not work properly (slow, errors), Windows Vista SP1 AIK works better for what we are trying to achieve here.
0 -
I understand you would like this. My guide took quite some time and it is just that I want to share my work with others so they can benefit from it. I understand you want it to be easier, but just like some do not understand batch-files, I am not expert in writing programs in for instance .NET. Should I be able to do this, then I might make a tool out of it.
0 -
Windows 7 x64 vLite "extreme removal"
in vLite
Posted
Sorry guys, almost everything works great for me except fot bluetooth support and I have not been around lately...
@Junior2613: If they can not be removed, then it is not a big issue if the other packages are removed (otherwise image is "broken").
@sxxin: I hear many people on this, yet I have only encountered such errors with my .NET cleanup.
@pletwal_blekitny: the language packages also can be integrated by my tutorial, if you include multiple languages then you can choose the one you want to install