Hi . My MB is a MSI K8N Neo Platinium based on nForce3 250 Gb chipset. I successfully managed to integrate nVidia SATA/RAID controller driver in my unattended installation, thanks to the OemInfFiles method described here. I was forced to use the 5.35 non-WHQL drivers included in the pataraid directory of the nforce 7.13 package, because, according the .inf files, they are the only ones to support nForce3 (all nVidia chipsets in fact). Actually the WHQL drivers in sata_ide and sataraid seem to only support nForce4 and nForce4 IE chipsets. Here is my problem. I didn't managed to integrate WHQL non-mass storage drivers (like AMD K8 driver) using OemPnPDriversPath=... in the [unattended] section of WINNT.SIF : ;SetupMgrTag [Data] AutoPartition=0 MsDosInitiated=0 UnattendedInstall=Yes OemDrivers=OemInfFiles [Unattended] UnattendMode=FullUnattended OemSkipEula=Yes OemPreinstall=Yes OemFilesPath="..\$OEM$" TargetPath=\WINDOWS UnattendSwitch=Yes WaitForReboot=No CrashDumpSetting=0 DriverSigningPolicy=Ignore ExtendOemPartition=0 Filesystem=ConvertNTFS Hibernation=No NtUpgrade=No Win9xUpgrade=No Repartition=No KeyboardLayout="French" OemPnPDriversPath="Drivers\001_cpu;Drivers\002_wifi" [GuiUnattended] AdminPassword=* EncryptedAdminPassword=NO AutoLogon=Yes OEMSkipRegional=1 TimeZone=105 OemSkipWelcome=1 [UserData] ProductID=XXXXX-XXXXX-XXXXX-XXXXX-XXXXX FullName="XXXXXXX" OrgName="" ComputerName="XXXX" [Display] BitsPerPel=32 Xresolution=1280 YResolution=1024 Vrefresh=60 [RegionalSettings] LanguageGroup=1 Language=040C [Identification] JoinWorkgroup=WORKGROUP [Networking] InstallDefaultComponents=Yes [Components] accessopt=off chat=off dialer=off hypertrm=off mousepoint=off msnexplr=off freecell=off hearts=off minesweeper=off pinball=off solitaire=off spider=off zonegames=off media_clips=off media_utopia=off mswordpad=off rec=off clipbook=off wmaccess=off wmpocm=off [WindowsFirewall] Profiles = WindowsFirewall.TurnOffFirewall [WindowsFirewall.TurnOffFirewall] Mode = 0 [OemInfFiles] OemDriverFlags=1 OemDriverPathName="%SystemRoot%\OemDir" OemInfName="nvatax64.inf","nvrdx64.inf" In fact, setup seemed to skip the OemPnPDriversPath line because once the installation is finished, I saw in the device manager that Windows installed its proper AMD K8 driver, whereas it was supposed to be the last 1.2.2.0 driver from AMD. So I was wondering if it were due to the [OemInfFiles] section presence, and if there was a way to force setup to use drivers mentionned at the OemPnPDriversPath line. Sorry for having being a bit long and thanks for your answers.