Jump to content

Fernando 1

Member
  • Posts

    2,026
  • Joined

  • Last visited

  • Donations

    0.00 USD 
  • Country

    Germany

Posts posted by Fernando 1

  1. Since the MEGA download links to my modded 32/64bit AMD SBxxx AHCI&RAID drivers v3.3.1540.33 for Windows XP (x86/x64), which I had posted >here<, were dead, I have re-uploaded them both to my OneDrive account and corrected the links.

    Here are the links again:

    >32bit AMD SBxxx AHCI & RAID Driver v3.3.1540.33 for XP mod by Fernando<

    >64bit AMD SBxxx AHCI & RAID Driver v3.3.1540.33 for XP x64 mod by Fernando<

    Good luck!

  2. Im trying to use your drivers ">32bit AMD SBxxx Textmode Driver v3.3.1540.33 for XP mod by Fernando<" in my sony vaio pcg-71c11u model VPCEL10EL, according to CPU-Z it has an AMD E-350 Processor, AMD K12 IMC Chipset and A40/A50 Series FCH Southbridge, will they work?

    To answer this question I need the HardwareIDs of the AMD SATA Controller.

    can you upload a mirror since they where removed from mega.

    You can find the related MEGA link within the start post of >this< thread.

    i'm having a hard time downloading an xp sp3 version that is untouched, any pointers?

    Only users, who are owner of a legit original XP CD with a Microsoft hologram are supported by me.
  3. Is there a way to switch to AHCI without installing from scratch?

    The switch of the SATA mode from within a running OS is always risky and may end with an unbootable OS. That is why I do not really recommend to do it.

    If you want to do it nevertheless and are sure regarding the DeviceID of your on-board Intel SATA Controller after the switch to "AHCI", you can try the following:

    1. Do a backup of your most important data (for the emergency case of a SATA mode switch failure).
    2. Boot into XP in IDE mode, run the Device Manager, expand the "IDE ATA/ATAPI Controllers" section  and find out the Intel SATA Controller, where your system drive is connected.
    3. Right click onto the related Controller and choose the options "Update Driver Software ..." > "Browse my computer ..." > Let me pick ...".
    4. Hit the "Have Disk" button, navigate to the folder with the modded 32bit Intel RST driver v11.2.0.1006, hit the file named iaAHCI.inf and choose the Intel SATA AHCI Controller, which will match your system after the later switch to AHCI mode. Ignore all warnings you will get and let the driver be installed.
    5. Enter the BIOS immediately while rebooting and set the Intel SATA Controller to "AHCI".
    6. Reboot and be lucky, if everything should work fine.
  4. @ samson1701:

    Provided, that you have a legal MS licence and a genuine CD key for Windows XP, here are some additional informations:

     

    If you want to get Windows XP installed onto your Intel 8-Series Chipset system running in AHCI mode, you will run into the following Intel AHCI driver problem:

    • None of the recently released Intel AHCI drivers are usable for a Windows XP installation (Reason: The absolutely needed file named TXTSETUP.OEM is missing).
    • The much older Intel AHCI drivers (latest: Intel RST v11.2.0.1006) do contain the needed TXTSETUP.OEM file, but natively do not support your Intel® 8 Series/C220 Chipset Family SATA AHCI Controller (Reason: The HardwareIDs of the newest Intel SATA AHCI Controllers are missing within the related INF file).
    Consequence for you: The only chance to get Windows XP installed onto your Intel® 8 Series/C220 Chipset Family SATA AHCI Controller is to load (F6) or integrate a modded Intel RST driver, where the missing HardwareIDs have been added. You can find such driver within the start post of >this< thread.
  5. So is good if I simply select all the drivers and integrate them?

    The screenshot shows all Intel SATA Controllers, which are supported by the integrated textmode driver. but the Windows 2000/XP Setup at the beginning of the OS installation (before the first reboot) is not able to find out the suitable one for your system (see my last post). That is why it is not a good idea to highlight all listed Controllers.

    You can minimize the risk of getting a BSOD while doing the OS installation, when you just highlight the Controllers with the word "AHCI" within their name.

  6. I think this what I need for AHCI, however they do not write 2000 support, the XP is the oldest. Will the XP AHCI working with 2000?

    It seems possible, but I am not sure.

    Your problem will be anyway, that you obviously do not know the exact name resp. DeviceID of the on-board Intel AHCI Controller. So you may have to guess it while integrating the AHCI driver into the Windows 2000 image or while loading the textmode driver via F6.

  7. Somebody can advice where to download ahci driver for windows 2000 for Dell Latitude E4310 and how to integrate?

    If you find out the HardwareIDs of the on-board Intel SATA AHCI Controller, I would try to help you.

    This is the way you get them: Install Windows 7, open the "IDE ATA/ATAPI Controllers" section, right click onto the listed AHCI Controller and choose "Oroperties" > "Details" > "Property" > "HardwareIDs".

  8. On 22.3.2014 at 7:04 PM, BubbleBobble said:

    I'm formatting pc to make a clean install and want to use latest drivers

    Before I successfully used "32bit AMD SBxxx textmode driver v3.3.1540.22 for XP mod by Fernando" and now I want to use your latest but website is unavaiable...

    so download is not possible.

    You are right. The domain win-lite.de, where many of my files were hosted, is down resp. not available anymore.

    Here are the new and hopefully working download links:

    >32bit AMD SBxxx Textmode Driver v3.3.1540.33 for XP mod by Fernando<

    >64bit AMD SBxxx Textmode Driver v3.3.1540.33 for XPx64 mod by Fernando<

    Good luck!

  9. @ jumpcan:

    Please open the "IDE ATA/ATAPI Controllers" section of the Windows XP Device Manager and post the name(s) - and if possible the HardwareIDs - of the listed Controllers(s).

    To add the chipset's USB drivers, which drivers would I select?

    It depends on the chipset of your mainboard. If it should be an Intel chipset, the XP hardware detection will find the appropriate INF files automaticly within the extracted Intel Chipset Device Software folder named "All".
  10. Do you mean that I should have selected "5. Now click the Insert button at the bottom and select Multiple driver folder,

    If not, I will select "multiple driver folder"; then D:\Gigabyte*_07_Mar_2014\hseries-xp\x86

    Is that correct?

    No, I meant, that you shouldn't integrate D:\Gigabyte*_07_Mar_2014\hseries-xp\x86, because there are obviously a lot of different textmode drivers.

    Instead of a driver mixture you should integrate just 1 driver (the correct one). Otherwise you risk either a BSOD or that the correct driver will be overwritten by other drivers during the integration procedure.

    Remember: All integrated textmode drivers will be copied by nLite into the i386 directory of the XP image. Drivers with the same name will be simply overwritten.

  11. My plan is, on an XP SP3 drive WITHOUT nlite installed:

    install nlite

    add SP3

    add / select only D:\Gigabyte*_07_Mar_2014\hseries-xp\x86

    The XP installation will fail, if you really do that.

    As I already have written, you should integrate just the appropriate textmode driver (accompanied by the related INF, CAT and OEM files) and not a subfolder with a lot of different drivers.

  12. @ misterx7777:

    Thanks for posting the HardwareIDs.

    Conclusion:

    You can integrate any of the 32bit Intel RST drivers, but I recommend to take the 32bit Intel RST driver v11.2.0.1006 WHQL (you can take the modded version as well).

    When nLite is going to integrate it as textmode driver, you should only check the listed "Intel® Desktop/Workstation/Server Express Chipset SATA AHCI Controller".

    If you take an original (untouched) XP CD as source, I have no doubt, that you will succeed with the XP installation in AHCI mode.

  13. The problem is just that: I have the need to enable the ahci because I have a multi-boot system (xp - seven -win8 ).

    For seven and win8 all is o.k. in ahci, there are no problems.

    This forces me to change the options of the bios when I switch to xp. For this reason I would like to install the correct drivers for xp.

    Then you should boot into Win7 or Win8 (in AHCI mode) and post the HardwareIDs of the SATA AHCI Controller, where your system drive is connected.
  14. This time, I selected all drivers from the files I downloaded.

    I selected textmode for each item.

    I verified that amd_sata.sy_ was in the i386 folder

    The file ahcix64.sys is corrupted.

    Here is my statement:
    • It was a mistake to integrate the AMD AHCI driver named amd_sata.sys. This driver is only usable with Vista, Win7 and Win8, but not with Windows XP. The correct 32bit AMD AHCI driver for Windows XP is named ahcix86.sys.
    • The message "The file ahcix64.sys is corrupted" indicates, that you have tried to integrate a 64bit driver into a 32bit OS. That was a mistake as well.
    • If you are searching for a suitable AMD AHCI driver, you may look into the start post of >this< thread. Note: You will find the AHCI driver listed as RAID driver, because the AHCI supporting AMD Controller is named "AMD AHCI Compatible RAID Controller".
    • Windows XP Setup is very sensitive regarding wrong textmode drivers or wrong AHCI/RAID Controllers, which have been checked when doing the loading or integration of the textmode driver. So it is a good idea to integrate only 1 single AHCI or RAID driver (the suitable one for the SATA Controller, where the system drive is connected) and - if you get a list of different SATA AHCI/RAID Controllers during the textmode driver integration - to check just the correct one and not all of them.
  15. @ misterx7777:

    Welcome at MSFN Forum!

    According to the HardwareIDs and Intel SATA Controller names you have posted, you are running your system drive in IDE and not in AHCI or RAID mode.

    As long as you do not switch the Intel SATA Controller within the BIOS to AHCI or RAID mode, you will be able to install Windows XP without loading or having integrated any Intel textmode driver.

    Regards

    Fernando

  16. @ sabesto:

    If you should be able to boot into Vista or any other Windows OS, please check the HardwareIDs of the in use SATA Controller:

    Open the "IDE ATA/ATAPI Controllers" section of the Device Manager, do a right click onto the listed SATA Controllers and choose the options "Properties" > "Details" > "Property" > "HardwareIDs".

  17. @ Slessard:

    Welcome at MSFN Forum!

    The link that you mentioned in post 41 sends me to a "MediaFire" website that shows an invalid or deleted file.

    Is this the zip file that you are talking about?

    32bit AMD SBxxx textmode driver v3.3.1540.29 for XP mod by Fernando.7z

    You can find working links to the modded 32/64bit drivers within post #234 of this thread: http://www.msfn.org/board/topic/135840-integration-of-amd-ati-sb7xx-textmode-raid-ahci-drivers-on-an-xp/?p=1012118

    Also, I have an AMD SATA Controller (Native IDE Mode) instead of the Standard Dual Channel IDE Controller. Is this the one that I should update? The other ones are AMD PCI IDE Controller and two of the Primary IDE Channels and two of the Seconday IDE Channels.

    You will have to update the IDE ATA/ATAPI Controller, which is managing your system drive (the drive, which contains Windows XP). You have to find it out yourself.

    Also can you educate me and tell me what this BIOS setting in the Chipset page. It shows "Native IDE", "RAID", "AHCI", "Legacy IDE", and "IDE->AHCI". I am interested in what the last setting means. I can not find any documentation anywhere that addresses the "IDE->AHCI" selection. All I know is that if I select it, Windows XP will BSOD.

    I don't know, what the "IDE>AHCI" BIOS setting means. Please ask the manufacturer of your mainboard.

    As a last, as I have already imported the reg hack from Cdob in post 9 and moved the file as indicated, should I revert back to an earlier version of the registry? I exported a copy before I ran the hack in case there was a problem and I needed to revert.

    You should ask Cdob.

    By the way: This is the nLite Forum and the topic of this thread is the "Integration of AMD/ATI SB7xx textmode drivers into a Windows XP CD".

    Regards

    Fernando

  18. slessard:

    Welcome at MSFN Forum!

    First of all I want to point out, that your request is absolutely off-topic. The switch from IDE to AHCI mode while running Windows XP has nothing to do with the topic of this thread and nothing to do with "nLite", which is the name of this MSFN Sub-Forum.

    By the way: There is another option to get XP running in AHCI mode without the need of a clean install of the OS and without the need of a registry hack.

    These are the steps:

    1. Download and unzip a suitable AMD AHCI driver for Windows XP (e.g. the modded one, which I have linked within ths thread).

    2. Boot into XP in IDE mode.

    3. Open the "IDE "ATA/ATAPI Controllers" section of the Device Manager.

    4. Do a right click onto the "Standard Dual Channel PCI IDE Controller", which s managing your system drive, and choose the following options: "Update Driver Software..." > "Browse my Computer ..." > "Let me pick ..." > "Have Disk ...".

    5. Navigate to the file named ahcix86.inf, which is within the unzipped AMD AHCI driver folder, and force the replacement of the "Standard Dual Channel PCI IDE Controller" by the "AMD AHCI Compatible RAID Controller".

    6. Reboot and enter the BIOS while rebooting.

    7. Set the AMD SATA Controller to "AHCI" mode.

    8. Reboot into Windows XP.

    10. Enjoy Windows XP in AHCI mode and a dual boot system without the need of switching the SATA mode while booting.

    Good luck!

    Fernando

  19. Thanks for the prompt response Fernando. I finally installed AHCI manually, I didn't pay attention and was installing the same ATA drivers over again. They were (in ATA) 8C00 and 8C08, now in AHCI it is 8C02, is this correct?

    Yes, that is correct and everything seems to be fine now.

    I don't have any idea why the nLite integration failed. Maybe you have checked too many or the wrong Intel SATA Controller during the textmode driver integration.

    Have fun with your Windows XP running in AHCI mode!

    Fernando

  20. My ID's are different from what you mentioned, I'm on Z87 chipset, they are: 8C08 and 8C00. Are they right?

    When I rebooted it skipped the BIOS screen and went directly to the "Windows didn't load correctly" screen. I then reset and enter BIOS, does it need to be right away?

    DEV_8C08 and DEV_8C00 are no valid DeviceIDs of any Intel SATA Controller running in AHCI mode.

    Please open the "IDE ATA/ATAPI Controllers" section of the Device Manager and post the names of the listed SATA Controllers.

×
×
  • Create New...