ack-hh
Content Type
Profiles
Forums
Events
Posts posted by ack-hh
-
-
Assuming odbcjt32.dll is located in the folder c:\windows\system, and further assuming that you have copied the new file to c:\windows\temp, do the following:
Using NOTEPAD, open the file c:\windows\wininit.ini
Add the following two lines:
[rename]
c:\windows\system\odbcjt32.dll=c:\windows\temp\odbcjt32.dll
Restart WinME
HTH - Andreas
0 -
When I open the Windows Explorer in Win98SE, and roaming from one folder to the others in the Explorer Bar, it will take longer and longer time to display the contents of the folder in Details View at the right panel.
Does this occur in Safe Mode too?
0 -
There has got to be another way
No, there isn't. A lot of localized strings are hardwired in a lot of files (DLLs, EXEs, ...)
0 -
how bout just the batch inf with the eula and product key popups hidden that be sweet
cause a o instead of a 1 doesnt work and attach batch 98 inf here.plz
It has already been posted in THIS thread. Read soporific's 1st article and have a look at the OPKInstall section ...
0 -
Use a VB script (WMI is required also):
strComputer = "."
Set wbemServices = GetObject("winmgmts:\\" & strComputer)
Set wbemObjectSet = wbemServices.InstancesOf("Win32_LogicalMemoryConfiguration")
For Each wbemObject In wbemObjectSet
WScript.Echo "Total physical memory (KB): " & wbemObject.TotalPhysicalMemory
Next0 -
The file named "directx.log" should give you a hint.
0 -
* It would be quite good to also be able to delete the MSN icon from the desktop automatically. Its annoying that if you forget to delete it before trying to get on the net, a completely unwanted invitation to connect to MSN appears. Apparently the Batch98 utility was designed to achieve this but it doesn't work (even if you just try it without ANY updates at all), and there was also a Dec 2004 KB article that showed how to do it, but that doesn't work either. (Actually it may work but the code was posted without any context - its unclear which other settings need to appear in tandem.) I've also tried RegShot (paraglider version - thanks eidenk) but not extensively, to no avail.
I have managed to remove the MSN icon, but at the ultimate stage of the setup
process (after logon) two RunOnce jobs are active which put back that @*~!§$ icon
0 -
I'd also like to automatically set the vcache parameter in Win.ini
I guess you mean system.ini. Add this to your msbatch.inf:
[UPD.Sys.systemini]
%10%\system.ini, 386Enh, , "32BitDiskAccess=on"
%10%\system.ini, 386Enh, , "32BitFileAccess=on"
%10%\system.ini, 386Enh, , "PagingDrive=C:"
%10%\system.ini, 386Enh, , "PagingFile=C:\PAGEFILE.SYS"
%10%\system.ini, 386Enh, , "MinPagingFileSize=200704"
%10%\system.ini, 386Enh, , "MaxPagingFileSize=200704"
%10%\system.ini, 386Enh, , "WindowUpdateTime=1"
%10%\system.ini, 386Enh, , "LocalLoadHigh=1"
%10%\system.ini, 386Enh, , "VGA MonoText=Off"
%10%\system.ini, 386Enh, , "Text=Off"
%10%\system.ini, 386Enh, , "ConservativeSwapfileUsage=1"
%10%\system.ini, vcache, , "MaxFileCache=32768"
%10%\system.ini, vcache, , "ChunkSize=2048"
[Install]
UpdateInis=UPD.Sys.systeminiNEVER set a maximum for the swap file unless you REALLY need to do so.
NEVER use ConservativeSwapfileUsage=1 unless you REALLY need to do so.
(Why should one downgrade to the legacy W95 mode of swap handling?)
Naming the swap file Pagefile.sys (only) makes sense when the swap file
is shared with another OS which uses a swap file with that name.
The value for MaxFileCache might be way too small for many machines -
individual adjustment is required.
The ChunkSize setting is questionable.
0 -
Update:
http://www.msfn.org/board/index.php?act=ST...&t=46860&st=45# (Ultimate Freeware Machine)
0 -
- Copy the W98 installation folder from the setup CD to your harddisk.
- Copy the drivers which you want to add to your harddisk.
- Unpack or extract the drivers, so INFINST can find the required .inf files.
- Run INFINST to add the driver files to the setup files.
- Make a new W98 setup CD.
0 -
Use INFINST.EXE - should be found on your W98 CD.
0 -
Try
[HKEY_CLASSES_ROOT\Drive\shell\FList\command]
@="C:\\WINDOWS\\command.com /c dir \"%1\" /a-d /b /s|sort>FileList.txt"0 -
Please post some excerpts from the list which show
where the sorting "breaks".
0 -
See also:
"How to add the print directory feature to Windows Explorer"
0 -
A few questions/remarks:
- launch.bat & install.bat are missing
- the script refers to ie6sp1.bat, ie6_98.bat is shown; are these files identical?
- update3.bat is shown, but nowhere refered to
- does dx9.bat look similar to ie6sp1.bat (ie6_98.bat)?
Regarding the logon prompt:
fantomcat's hint did the trick for me (add the line e. g. to the OPKInstall section):
; The line below turns off the user logon going into Windows (needed for
; factory configuration portion of Express setup).
HKLM,"SOFTWARE\Microsoft\Windows\CurrentVersion\Network\Real Mode Net","autologon",1,00000000"
(maybe this only works if "Windows logon" is used)
Regarding monitor drivers:
I injected the .inf file for my monitor via INFINST into the WIN98 setup folder.
Because my monitor is not 100% DDC(?) compatible it was not
automatically detected by w98. Therefore I took a snapshot before and
after I set up the monitor in the display properties using REGSHOT,
compared these snapshots using REGSHOT, and finally built a .reg file
according to the difference of these two shots.
REGSHOT v1.72: http://www.majorgeeks.com/download965.html
HTH
Andreas
0 -
here's the answer:
THANK YOU! The OPKInstall section was very helpful.
0 -
Reset the read only attribute (Right click - Properties).
0 -
Download Express from Metaproducts fits my needs:
free, fast, reliable, no ads, no spyware, is updated regularly.
0 -
You'd better mask the product key ...
0 -
I have a 63 GiB partition on a 100 GB drive. This partiton has about 40 GB of files on it.
This partition is much smaller than the claimed Scandskw (Windows ScanDisk) limit of 127 GiB.
Scandskw fails with an out of memory error when trying to scan this partition. I have 1 GB of RAM, so this error is bogus.
It's Windows ME Scandisk too, since I installed 98SE2ME.
From http://support.microsoft.com/kb/229154/EN-US/ :
This problem may occur if either of the following conditions is true:
• You are running Windows on a hard disk that is larger than 8 gigabytes (GB)
and that has a cluster size that is smaller than 8 kilobytes (KB).
This configuration may occur if you use a third-party disk tool to create a partition
on a hard disk that is larger than 8 GB and that has a cluster size that is smaller
than 8 KB.
-or-
• You are running Windows on a very large hard disk that has a default Windows
cluster size of 32 KB.
0 -
Is there any known length limit?
from http://msdn.microsoft.com/library/en-us/in...fb2d300.xml.asp :
"INF Size Limits
A Windows 9x/Me INF file cannot be larger than 64 kilobytes.
There is no practical limit to the size of an INF file for NT-based systems.
Unless otherwise restricted in this documentation, the maximum length of
any INF file field is 512 characters (including a terminating NULL character).
Note, however, that Plug and Play may impose a more restrictive limit
for certain INF file fields that it recognizes or uses, such as device description,
driver provider, and device manufacturer."
HTH
Andreas
0 -
-
Replace your keyboard with a known good one.
A key which, let's say, works fine with and without the SHIFT key
is no proof that a problem with that key in combination
with the ALT/ALT GR is NOT hardware related - even if
the ALT/ALT GR key works fine in combination with other keys.
BTW: Which operating system are you using?
Which type of keyboard (serial, PS/2, USB) are you using?
0 -
how to change logo.sys & logow.sys & logos.sys with with this batch?
Not tested, but should work:
To change logo.sys, logos.sys, and logow.sys, simply copy your
.sys files to the Windows 98 installation folder (\Win98). These files
will be copied to the right place by the setup procedure automatically.
0
Installed (System) Files Checker.hta
in Windows 9x Member Projects
Posted
Hi,
instead of running the DIR command three times for each desired folder,
why not run it only once, using for example 'dir C:\ /O:GN /A /-P'?
And, BTW, why are you using a batch file at all? You can process
directories (and their subdirectories) with VBS very well.
And, BTW2, why don't you use SFC?
Regards
Andreas