hasbrotech

Has anyone been able to create and deploy a win 2k3 server image ? Trying to use either BDD 2007/ or Deploy 4 to create a image that is captured and then deployed down to servers. anyone that has been able to do this I would like to know how you were able to do this. Will not be a pain, just need some guidance. thanks in advance. hasbrotech

regarding the updateUPHAL line you placed in the sysprep. The %systemdrive%, what does that need to refrence, or can I just leave it like that ? %systemdrive% ? I ahve a multiprocessor machine that im building my image on and need to deploy it to uniprocessor machines, and this is the only way I know how to with updating the HAL. any suggestions would be great. thanks !

thanks for the fast responses all !!! I really appreciate it !! Jared

anyone figure out a fix the this issue. Have just ran into it. Have a new IBM T43P and im using my XP image on it and when I go to update the Driver it lock up tight ? Any ideas ??

Have and still have same issues. I disabled the broadcom and installed a 3com and BARTPE loaded fine and had no issues. I got the latest driver 57XX from broadcom, dated back in april.

disabled the nic card and bart loads. while it loads, it does give me an error regarding cant load the nic, or network which is fine. well, let me goto broadcom and see what they have to say about this. thanks for your help. any other idea, please let me know ! hasbrotech !

Pulled the riser card and still have same issue. I have updated the bios to A05, and even tried new memory. any other ideas ??

if you mean do I have a PCI riser card for expansion cards yes I do.

Trying to get WINPE to work. Not ahving much luck. I need WINPE to boot, and load my Nic Driver (broadcom57XX) and then log into my network. I can get WINPE to boot, but it just sits at a command prompt. Network is not loaded. How do I customize WINPE to use my Nic card and load my network ? and suggestions would be great ! thanks

I have a Dell GX280 that when I load BARTPE and it tries to load the NIC driver the system halts witha NMI parity error. Ive updated the NIC drivers in Bart to the latest Broadcom for the 280, and have updated my Bios to A05 on the Dell. Any ideas what might be going on ?