PitKoz
Content Type
Profiles
Forums
Events
Posts posted by PitKoz
-
-
5 hours ago, WinFX said:
Hello
Does anyone have a modded Intel(R) Ethernet Controller I219-V driver?
I need Ethernet connection on my Windows 8.1
I guess the procedure is the same download drivers from windows cat or intel and mod inf removing part of the lines and voila it is installing.
Here is how:
0 -
2 hours ago, ED_Sln said:
No, I mean important system updates, like "Platform Update" KB2670838; "SHA-2" KB4490628 and KB4474419-v3. The best thing to do is to have the system fully updated.
We are still talking about win 7 and 225v net cards?
So, how to check SHA-2 ? The other KB-s I have set on 99%
I will check all next time I go to W7.
0 -
19 hours ago, jaclaz said:
No, that is not possible.
Neither Bios nor UEFI read the BCD.
BIOS reads the MBR and its code then loads the bootsector of the partition, the bootsector code loads the BOOTMGR that reads the BCD (the one in \boot\BCD).
UEFI reads the BOOTMGR.EFI that reads the BCD (the one in /EFI/Microsoft/Boot/BCD).
The cause of the slowness must be *something else*.
jaclaz
Thank You for showing interest to help me.
In Compatibility mode I have now 3 screens with systems to chose first is completely odd, so links are not valid at all second is very long has empty managers links and valid links to systems and 3rd one with all valid links
in BIOS there is only one boot disk/partition designated to start it is NVMe Samsung directly attached to CPU
Visual bcd editor shows this:
and easyBCD:
This UEFI for multi boot systems is a bit tricky... so far did not decipher the multilayer design of it
Any idea where to start this clean-up?
All Advices will be appreciated.
0 -
On 5/26/2023 at 7:00 PM, ED_Sln said:
This motherboard has Intel I225-V network controllers, so the drivers I uploaded should install, maybe there are some updates missing.
What updates you think about: NET 4.8 or something else?
Still can not make them work...
0 -
I have some very old soft on my 20 years old PC Workstation. Starting with # inch Ninja funny game.
Some desktop bugs/worms or dwarf or hamster screensavers and more
And big collection of very old CD with free soft.
Love Recoil game. The best tank game ever
1 -
Nice big job!!! Thanks for your efforts and congratulations on making a live working thing
"It's alive!. It's Alive!!"
0 -
On 5/26/2023 at 12:53 PM, ED_Sln said:
For Nvidia USB there should be a stub that hides the exclamation point.
What is "stub" ?
0 -
9 hours ago, ED_Sln said:
I try to avoid UEFI if possible and install the OS in Legacy mode. That's why I can't probably help you with this. But as far as I know, besides a working boot loader on the disk you need to set up Windows Loader in the Boot section of the BIOS.
I guess there is big problem rising with MS which never liked multisystem configuration, and legacy and UEFI has separate BCD-s in different locations
I guess the problem is with bios which reads legacy and UEFI BCD from the boot partition despite it was ordered to read only UEFI
Legacy is starting so slow... I guess it does no matter to you, as your PC is not this complicated as mine.
You can always boot both modes, no matter how all was setup, for Windows 7 we need only win7 UEFI loader in BCD boot folder, as UEFI 10 loader is not loading win 7.
After sorting all systems will simplify it much.
Got too much computer for now,
Yesterday finally managed tricky fresh installation of LTSC 21H2, tricky as it looks like it can be only cloned or setup with upgraded image,
The installation got all drivers from working copy and did not implement them into setup, so it was all the time result InaccessibleBootDevice.
Inserted missing F6 drivers with DriverStoreExplorer.v0.11.92...
Cheers
0 -
4 hours ago, ED_Sln said:
I just really dislike OSs that came out after 7, so I use it myself and try my best to help others stay on 7 as long as possible.
I have to thank you again, and you will not believe that I have such allergy to post 7 OS, that the only system I was forcibly made to use is 10 NTSC Enterprise.
And this system recently had partially collapsed during moving to new PC LMFAO... Now trying to revive it to full health, all OFC due to MS mentally corrupted devs who follow-up Corpo sell sell sell 11... I really hate the 10
and do not even think what dung will be implemented in 11.
All those mistakes imported from pre NT even, not user focused interface, metrics problems and drifting to Stupidphone interacting procedures.
All those systems are "a huge, expensive machines for blowing out candle"
So we are, about Windows 7, brothers from different mothers
Now disconnected all hardware from PC
will try again in-place-install-repair....
I would set new LTSC and move all from old, but it seems like it is not really possible.
Failed also twice.
Maybe you will know what to do with something like "ghost UEFI system boots", I have one M.2 now but during classic start have like 3 screens
with non-working BCD links... 3rd screen is showing live systems...maybe later will show what I think about making photos during boot.
For now, good night and good luck.
1 -
OMG you are so helpful and active in this forum, it is really exceptional!
53 minutes ago, ED_Sln said:It's hard to tell, write the IDs of non installed devices, maybe there will be drivers for them. Or write the name of the motherboard so I can find what controllers are there. For Nvidia USB there should be a stub that hides the exclamation point. And for another USB driver is not installed?
--The board is Gigabyte Z590 Vision C rev 1 : https://www.gigabyte.com/Motherboard/Z590-VISION-D-rev-10#kf
Latest Bios is F8 a bit better than previous ones.
--Trying to start UEFI 7 in next stage.
--Now upgrading LTSC 10 21H2 ... some errors in distributed elements, the most important is CryptServ looking like destroyed.
"Faulting application name: svchost.exe_CryptSvc, version: 10.0.19041.1566, time stamp: 0x1f37eb46
Faulting module name: bcryptPrimitives.dll, version: 10.0.19041.1415, time stamp: 0xe9d3d417 (this version of DLL is not recognized in any search)
Exception code: 0xc0000006
Fault offset: 0x0000000000053dfc
Faulting process id: 0x3028
Faulting application start time: 0x01d98fd1653e2ab3
Faulting application path: Z:\Windows\system32\svchost.exe
Faulting module path: Z:\Windows\System32\bcryptPrimitives.dll
Report Id: f1a7d434-6d0f-4ed4-8cd6-dce4d5e16667
Faulting package full name:
Faulting package-relative application ID:"--PCI Simple Communication was kind of common case for Windows 7
Have to log in to win 7 to give you IDS, will do it in a few hours.
--What you think about, SDIO_x64_R753?
At some stage was trying to use it for updating drivers to LTSC and system was bricked.
Restored it from Macrium image.
It looks like it has some updates for Win7, but did not use it yet.
Will be back later.
0 -
On 5/22/2023 at 5:34 AM, ED_Sln said:
https://mega.nz/file/jzpDCCAI#yRlGRDO_YH_qJl0eKEJ1N2zsU6p3uwqs9CZe6jTq5Zg
And I also added the universal USB driver to the archive, it needs the KB2864202 update, and both drivers need the SHA-2 update, KB4490628 and KB4474419-v3.
Hi again, maybe... maybe... some more drivers missing from the list?
Will appreciate it very much
good treat is waiting 
0 -
On 5/22/2023 at 5:34 AM, ED_Sln said:
https://mega.nz/file/jzpDCCAI#yRlGRDO_YH_qJl0eKEJ1N2zsU6p3uwqs9CZe6jTq5Zg
And I also added the universal USB driver to the archive, it needs the KB2864202 update, and both drivers need the SHA-2 update, KB4490628 and KB4474419-v3.
Thanks a million, will come to win 7 soon, now on LTSC subject, it seems that we can not install LTSC 21H1 nor 20H1 nor earlier on new hardware PC without modding. In site upgrade is not working either.
IDK what is going about it, but it seems like all nerds involved in MS have sold their souls, work for Corpo and nothing is working as expected for users, but works for MS. Is 11 so tempting to have? I doubt.
0 -
On 9/20/2022 at 10:58 AM, ED_Sln said:
Try this unofficial driver for Intel network card: https://mega.nz/file/P2wh2a4D#MaXWUXyunUxS6UiHuM4xvdX-65Dilga4KLEd1ztMfdI
Can you reshare this again, plz?
0 -
On 4/24/2023 at 11:45 AM, innamorato said:
SDIO has the driver you need (and anything else, really)
What is SDIO ? Sorry for plain question but really new there... and in need for 7-x64
0
Windows 7 on the Intel Alder Lake/Z690 platform
in Windows 7
Posted
Hi OK came to such a stage that LAN are not responding for drivers, and trying to boot EFI but getting sound and sign that system is logged, but the screen stays with logo not fluctuating/static, can close system with power button it means that system is working behind the logo screen.
There is something about VGA and UEFI in context to Win 7, but can not find something clear enough to dare attempt to modifications.
CSM is working OK.