alexmirica

Hello again, No reply? In the meanwhile, I dig over the Internet and I did a head defects check: F3 T>/7 F3 7>X Head 00 Resistance 00FB Head 01 Resistance 0075 Head 02 Resistance 0186 Head 03 Resistance 014B So, the heads are good. Any suggestions?

Hello folks, My old Seagate Barracuda 1000TB ST1000DM000, PN: 9TS15E-570, FW: CC93 died suddenly, as many ill-fated Barracudas from all the world. I connected the USB-TTL translator and accessed the HDD via Hyperterminal. At power-up: Rst 0x20M Servo Processor Is Reset. RW: Disc Ctlr Initialization Completed. ExecuteSpinRequest (P) SATA Reset And does not react at CTRL+Z! Removed the power, removed the PCV and mount back with a cardboard over the voice coils contacts, then power up: At Ctrl+Z the prompt comes, and I type: I removed the cardboard and typed: this error displays endlessly. Please help me to revive this drive. I searched over this forum and I didn't found any solution related to my drive. Thank you very much in advance! Alex. Later edit: After that endlessly error, I powered down and again up the HDD and I got: Maybe this is relevant. Thanks!