Jump to content

arrr_beee

Member
  • Posts

    6
  • Joined

  • Last visited

  • Donations

    0.00 USD 
  • Country

    United States

About arrr_beee

Profile Information

  • OS
    95

arrr_beee's Achievements

0

Reputation

  1. Well, I got Win95 installed! I had to abandon copying the CD to C: drive and just install directly from the CD. I tried to xcopy, but just couldn’t get to work. Anyway, I install Win95 directly from the CD after making a DOS diskette with the proper CD driver. I don’t have the best drivers and need to do some searching for legacy drivers for audio and video. The laptop boots to DOS then to Win95??? The poor lil laptop only has 24MB and it’s so slow, but I think some of that is due to the drivers. I think the last time this laptop operated was in ’99. I sure thought it ran faster than it is. I had Office 97 installed originally and might put it back on just for giggles. I found a source for the CD on good ol’ Ebay. I went through several before getting one installed without breaking it. They’re cheap and plentiful. I had to reuse the OEM bezel and that was such a pain, but I got it and the only thing is the CD ejection panel doesn’t match the OEM, which I broke trying to remove it. I’m at a point where I can fiddle with the drivers and such to see if I can get it working better. I do have a PCMIA Ethernet 10/100 card I’ll install. It has IE 4.0 and I’d like to get it online just for the shortest time. Back then, I did use IE (the worst browser EVER). So now I have the following setup and running, Win95, Win XP, Win 7 and Win 8.1. I did go through the Win 98 ME disaster and skipped Vista all together. I’ll set them up side-by-side to take a picture and wince at the money it all cost.
  2. Two steps forward with one step back The boot diskette I got from bootdisk.com (version b) had four CD drivers available. One of the drivers was for the TORiSAN CD drive! I had to manually modify config.sys for each driver attempt, but on the third try, the CD came alive! I copied the driver over to the Setup Diskette and got the laptop to boot from the C: drive with the CD operational! I had to use the “DOS” off the Setup Diskette, because it had the parameters better set for installing WIN95 off the CD. The step back is the CD drive is flaky. I used Xcopy and the CD was struggling to copy the CD. I have a replacement coming in. So, I’ve replaced the floppy drive, got a USB floppy drive for my Win7 laptop, some diskettes, replaced the hard drive and now the CD. All of this for a Win95 laptop with a whopping 24MB of memory and Office 97 installed (Office actually worked just fine as did the laptop). I hope to complete this trip down DOS/WIN95 memory lane in the next week. Not done yet but many thanks to jaclaz. The big trick was the system c: command to move the system over to c: That got me going. Relearning lots of DOS syntax is always an adventure. I’ll post the results later when I get the replacement CD installed.
  3. When re-copying the Setup Diskette to the C:/ there was an autoexec.bat along with config.sys. Config.sys has the four CDROM names, listed 1 - 4. Each line is given a variable name MSCD001. Autoexec.bat uses the MSCD001 name for the MSCDEX command. Here is the config.sys file [menu] menuitem=NEC_IDE, Load NEC IDE CDROM driver menuitem=TOSH_IDE, Load TOSHIBA IDE CDROM driver menuitem=HIT_DVD, Load HITACHI DVD CDROM driver menuitem=ADAPTEC, Load SCSI CDROM driver (Adaptec) menuitem=NOCD, No CDROM support rem Do not really want a default selection rem menudefault=NEC_IDE,30 menucolor=7,0 [NEC_IDE] device=himem.sys /testmem:off device=NEC_IDE.SYS /D:MSCD001 [TOSH_IDE] device=himem.sys /testmem:off device=TAISATAP.SYS /D:MSCD001 [HIT-DVD] device=himem.sys /testmem:off device:HIT-DVD.SYS /D:MSCD001 [ADAPTEC] device=himem.sys /testmem:off rem device=ASPIDISK.SYS device=ASPI8DOS.SYS device=ASPICD.SYS /D:MSCD001 [NOCD] device=himem.sys /testmem:off [COMMON] files=10 buffers=10 dos=high,umb stacks=9,256 lastdrive=z Here is the Autoexec.bat @ECHO OFF set EXPAND=YES SET DIRCMD=/0:N cls set temp=c:\ set tmp=c:\ path=c:\ {NOTE: this parameter was orignally a:\, but I changed it to c:\} IF "%config%"=="NOCD" GOTO QUIT LH C:\MSCDEX.EXE /D:mscd001 :QUIT rem clean up environment variables The CD does spin-up with the CD in it. None of the drivers access the drive or even turn the ID led on. I'm Beginning to wonder if the drive is bad???
  4. I did the sys C: and it did the system transfer to C: I copied the Setup floppy to the hard drive including config.sys and it is booting from the C:/ hard drive. At boot the OS now goes to a menu to select which CDROM you have: 1. NEC IDE CDROM driver 2. TOSHIBA IDE CDROM driver 3. HITACH DVD CDROM driver 4. SCSI CDROM driver (Adaptec) 5. No CDROM support I tried each with no luck. #1 comes closest to looking like it will work. I get errors like the driver missing or corrupted on the others except for the NEC. The CDROM drive I have is a Torison (SANYO) CDR-U200-Z I've searched on-line all day for a driver and never found one. Tons of scam "driver update" sites. Apparently, this CD isn't a generic CD ROM. I will re-copy the Setup diskette onto the C:/ There is no autoexec.bat There is a config.sys and is responsible for the CDROM setup prompt at boot. I can at least boot from C:/ and get to a C: prompt. Still don't have a CDROM drive, so I can't copy/install the WIN95 OS. Getting closer.
  5. Files on Win95 Setup Diskette ASPI8DOS.SYS ASPICD.SYS ASPIDISK.SYS ATTRIB CHDSK CHOICE DEBUG DRVSPACE EDIT FDISK FORMAT HIMEM.SYS HIT-DVD.SYS MSCDEX NEC_IDE.SYS REGEDIT SCANDISK SCANDISK SYS Taisatap.sys ZZ ZZTOP The hard drive is formated as a single partition and is FAT 32. For giggles, I had DOS 6.22 and installed that just to see what FAT version it would have. It was FAT 16 and would only format 2.1Gb of the HD. With the Win95b Setup Diskette, I invoked the "large drive option" and formated with /s. I verified that the HD is FAT 32 and a single partition. I copied many of the files to the C: drive and most of the typical programs (like format, CHKDSK, FDISK) work fine directly from the C: HD. I obvisouly do not have a bootable OS. I wonder if some sort of image copy is needed. I understand the intent of having the minimal DOS OS files on the root of C: and then set BIOS to boot from the hard drive. I haven't been successful at accomplishing this. The CD drive I have is a Torisan CDR-U200-Z. It looks I have three CD drivers on the Setup Diskette: HIT-DVD.SYS, NEC_IDE.SYS and Taisatap.sys. I'm not sure which driver will work, but that's a simple matter of trying each with the MSCDEX command once I get a bootable OS. I might have to do some searching for a suitable driver if those do not work. Thanks for your interest in helping me with this project.
  6. Hobbyist Reinstalling win95 on Dell Latitude 133Mhz Here is my unique problem: this ol' laptop has a 3.5" diskette OR CD. The design is such that both cannot be used at the same time. Each are slide-in modules and the laptop has space for one or the other. No USB. There is the old Card Bus slots that are used for a 10/100 ethernet. And the BIOS boot is either Floppy or Hard Disk. I had to replace a bum hard drive. The "new" drive works fine and is a 4.3 Gb. I'm using Fat32 and can utilize the whole drive. I've got a new Windows 95b CD, which is not bootable. It did come with a Win 95 Setup Diskette (fat 32 no less) and that's great, but I need the diskette for access to the Windows 95 CD and can't with the floppy installed - it's one or the other. I don't have the restore floppy - that was lost years ago. The last time this operated was sometime in early 2001. I've tried all manners of trying to "copy" the Setup Diskette onto the C: drive, but have failed. Seemed pretty straight forward, copy the Setup Diskette onto the root and boot from the hard drive, then get the CD driver installed and go with the usual "setup" off the CD. Fat32 is one obstacle and desired to make use of large hard drive. If I could get the Setup Diskette copied onto the root C: drive and bootable, I could utilize the CD. It seemed simple enough, but I'm stumped. I've considered Win95 on 3.5" diskettes, but that is usually Win95a and is Fat16. This is just a hobby. This was actually my very first laptop, purchased back 1997. It cost a bazillion dollars at that time. I have my very first PC with Windows 3.11 and a whopping 40Mb hard drive with tape backp and 5.5" floppy. But for now, I'd like to resurrect the Win95 laptop. And yeah, I heard that and know about the eye rolling.
×
×
  • Create New...