Jump to content

blank

Member
  • Posts

    33
  • Joined

  • Last visited

  • Donations

    0.00 USD 
  • Country

    France

Everything posted by blank

  1. u can recover it by create a dektop.txt file in C:\Documents and Settings\%username%\Application Data\Microsoft\Internet Explorer\Quick Launch\ and put inside: [Shell] Command=2 IconFile=explorer.exe,3 [Taskbar] Command=ToggleDesktop then rename the file desktop.scf
  2. blank

    huh:0?

    have it too during nlite process on xp pro sp2 + nl1.0.1 and added only post sp2 hotfix Derni_re_session.ini
  3. best way i think, it's to install an xp+sp2 without f6 ( it should work if u don't use raid mode) then after the end of setup, install the full nforce package, it will install the lastest drivers for sata/pata controllers.
  4. U don't need ti install it to make it work, i have launch it from driver folder and it's working & viewing my raid. But if the exe is a cab file u need to expand it to get some needed dll's.
  5. i get the mediashield after install my nforce package, but as i say before i have a raid configured and perhaps it's join with nv sw ide driver, coz i install them during nforce setup. edit: the mediashield exe is in \IDE\WinXP\raidtool\NvRaidMan.exe (nforce 4 16x 6.85)
  6. because u don't have plug drive and configure raid.
  7. if i'm not wrong 6.85 is only for nforce 4 16x platform.
  8. Have the same mobo, i have make all bios update under windows with the asus update utility on mobo cdrom. On my old mobo to flash bios with alt+f2, i need to put on the floppy the bios rom and the awflash.exe (don't know if the same exe for asus mobo, not same bios brand). For the boot config in nvraid have the same thing too, in fact i had make a raid on sata 3/4 don't deleted it and remake another with the same disk on sata1/2 and can't mark it as boot until i ruplug my disk on 3/4 and deleted the raid.
  9. i cannot say that my floppy/mobo are 100% ok; all i see is that i have only bsod when i'm using nlite not with floppy + f6 setup. And i assume that's really mad coz i don't seen relation between floppy and nvraid.
  10. OK, this belongs to the other (x64) thread, but once mor my question:Did you ever try to integrate the LEGACY folder of the 6.85 package during your tests with 32-bit XP? yes, have the same result, nvraid is working but get bsod when disable floppy drive.
  11. hum i'm was wrong on nforce version, it's 6.83 for x64 and there's no legacy folder. I don't want on integrate others drivers, just need nvraid for windows setup and finish by the hand other drivers with lastest versions.
  12. just finish my xp64 setup, working fine with floppy disable. So i confirm for nf4 16x (asus a8n32-sli), it just need to integrate sata_raid folder as txtmode from 6.85 package without no mod on files. Sata and PATA controller are recognize as standard controller until 6.85 package is not installed.
  13. here's my bunch of test with my crappo floppy drive: fisrt one , clean xp32 sp1, sata_raid folder from 6.85 on floppy boot install (only raid drives plug) f6 + load nvraid driver install ok install 6.85 package + reboot plug 3° drive and reboot still ok disable floppy & reboot still ok second one, same cd, only sata_raid driver integrated with last nl (floppy disable and 3° drive unplug) boot install + delete all partition nvraid detect ok reboot after first install part , get bsod on acpi renable floppy in bios but not plug in & reboot install follow the end and finish fine install 6.85 package & reboot still ok reboot and disable floppy = bsod So there something wrong with nlite, perhaps someone can try to disable his floppy drive to test if the same thing occur. I'm remake an xp64 cd and test if it's work too
  14. Do you have try just to boot with your cd if windows setup can find drive without driver ? Maybe I am wrong, but I suppose, that this is the reason for all your troubles. If you want to create a new Raid array with 3 instead of 2 hdd's, it is not enough to enable the 3rd SataRaid port within BIOS, you have to add the new hdd to the array by nForce Raid utility.Before you do that, I would recommend a backup of your important datas. CU Fernando ok ok when i spoke about my 3° drive, it's only a data store drive, don't want to add it to my raid. I just unplugged for mbr problem and add it at the end on setup. I have only sata port 1&2 set in raid mode.
  15. It is not easy to understand.Do you mean that you integrated the SATA_RAID subfolder as TEXTMODE driver using nLite and additionally presented the same drivers by using F6/floppy method during TEXTMODE part of the installation? No i use the same driver but don't load it twice, i try floppy without integration and no floppy with integration You did not answer to these questions.I plug my 3° drive at the end on setup, dont use nvraid utility Don't have a clean cd, in fact the setup work with sp1a or sp2 without floppy, i get bsod until i disable floppy drive in bios.
  16. i'm mad one more time, after install of drivers/software/4-5 reboots, i unplug my floppy drive, disable it in bios, change boot setting and get the bsod !!! I just return to bios and enable floppy drive without plug it and windows boot normally So to resume raid0 set on sata port 1/2 + 3° drive on sata 3 + floppy enable in bios = boot ok raid0 set on sata port 1/2 + 3° drive on sata 3 + floppy disable in bios = bsod raid0 set on sata port 1/2 + no drive on sata 3/4 + floppy disable in bios = boot ok raid0 set on sata port 1/2 + 3° drive on sata 3 + floppy enable in bios = boot ok that's really awesome To resume for nf4 16x + 6.85 + xp32 Just add sata_raid folder as txtmode without no mod, make install only with raid disk to prevent windows to put mbr on wrong disk and let's floppy enable in bios I use a floppy with sata_raid driver + f6 @ windows install
  17. eheh i'va been a little crazy few minuts ago last i night i reinstall an xp32 coz this f**k*n starforce wont work on a xp64, so there all test i make using an xp32 with nf4 16x 6.85 package: -make a full unatend cd with content of legacy folder copy in sata_raid (without overwrite) = bsod -same with copy files describe on first post = same bsod (can stop reboot and error message was on acpi) -try unatend cd creator and adding only sata_raid folder without modding and follow fernando guide = bsod So i restart from 0 with floppy and xp pro 32 sp1a, i have copy on the floppy the content of the sata_raid folder and get no bsod. Then i make a full modded cd with nlite (added sp2 & all hotfix) without driver integration and make it work fine. So for the end i have use the same project before and add the sata_raid folder as txt with no modding on driver and get it work too Just want to notice that all the stuff describe in this topic is working until i use only two sata drive, in my last working cd nf4 sata controller & parallel ata controller are recognize as standart controller and get no more bsod after reinstall the nf4 6.85 package. To finish i think the bsod i get when using 3 drives on sata came from moving file before integration.
  18. ok i'll try this, because i want to reinstall an xp 32 and still having bsod. I had use the 6.85 package with nlite and unatend cd creator; with the two it's working find until i'll plug another drive on the nvidia s-ata port.
  19. RickSteele, how many drive do u have on sata port ?
  20. hum don't have a proper xp cd, only my xp +sp1 slipstream by hand. I look at my work if i can found one.
  21. here my test for xp32 on nf4 16x platform: using xp pro sp1, added sp2 + all hotfix using nForce4_x16_6.82_winxp2k_international: sataraid driver as txt and sataide as pnp. No other driver plug on sata port, only 2 raptor set in raid0 Install fully complet, hotplug an other driver on nf4 sata port ok, reinstall of nf4 16x package, reboot ( third drive still plug) = bsod , same in safe mode.
  22. You can prevent the reboot by hitting F8 and choosing "no reboot at system failure". Then you have plenty of time to read the error message.By the way: Is there a MBR on your 3rd (non-Raid) hdd, for example from earlier installation tests? If yes, you should delete it. no there no mbr on my third disk, it's just a storage disk. I'll make some other test on xp32 with 2 other sata disk.
  23. Thanks for the reply.When you got the BSOD after reconnecting the 3rd hdd at the end of the installation, did you try to boot in safe mode? If yes, did it fail? Could you read the error message? don't have time to read bsod computer reboot too fast, in safe mode= reboot without bsod (or really too fast to see it)
  24. this is what i do for x64 and working great, i haven't try it yet on xp32, last install on xp32 i plug my non raid drive at the whole end of windows install and get a bsod at restart like first debug on old nlite release. On xp32 nlited cd i had have just integrated sataraid driver.
  25. for xp 32 i use the package: nForce4_x16_6.82_winxp2k_international, but i can do nothing with my 2 other nforce sata port, all driver i plug feel good in bios config but i have no driver under windows. I try a bunch of trick to get something work buy nothing get more. So i swicth to an xp64, get the nf4 16x package: nForce4_x16_6.82_winxp64_international, i made no changes on directory, no files were move, just add sataraid as txt and sataide as pnp. First hust let's the raid disk plugs, instead xp will put boot file on disk ouside raid config. At the end of first steup part "dos like", i shutdown my comp, pluf my third disk, change boot sequence to start on raid en continue windows setup. Now i have all my disk plug on nforce sata port and working like a charm.
×
×
  • Create New...