F4FBlack

Hi everyone well I´ve an problem with my Seagate Barracuda 7200.11 (ST3100033AS Firmware: SD35 (YES I`D SHOULD UPDATE IT BUT THIS IS AN OTHER CASE )), before I´ll tell u my problem we go a bit back in the past (this makes sense), however I´d in last summer a firmware problem with my HD (it´s the same hard drive). So as an guy who always look at the INTERNET and see if there any solutions for this problem, I´d found this forum and many Tips and Tricks and was enable to FIX the disk, now may in time I´ve now a new problem first the syndrome of the hard disk. If I put it in to my PC or on a USB port it´s starting but it´s stay in busy mode (it´s always running) but on PC nothing happen, so I´d got an Tool form Seagate and checked out what it´s could be, after a few test runs I´d got the result, that the HD haves an pass error. So I´d tried to fix it as in the past without any succeed, I´d tried it about 10x times. So as an good PC guy I´d make me notice form the errors, in the hope anyone can help me to fix it and bring the HD back in life. Thank u for reading and also for ur help Cheers Black Here the first log (Fixing 0 LBA error method) Rst 0x20M (P) SATA Reset PASSPackage Verified No Phy: Staggered spin bypass ASCII Diag mode F3 T>m0,2,2,0,0,0,0,22 Max Wr Retries = 00, Max Rd Retries = 00, Max ECC T-Level = 00, Max Certify Rewr ite Retries = 0000 User Partition Format 3% complete, Zone 00, Pass 00, LBA 00004AA5, ErrCode 000 00080, Elapsed Time 0 mins 30 secs WriteCapInfo Selection = 0000 CurrentCap 74706DB0 HDACap 74706DB0 No update: HDA EQ Current CurrentHDA 74706DB0 HDACap 74706DB0 NativeCap 74706DB0 48BitCap 74706DB0 28BitCa p 0FFFFFFF NO Save User Partition Format Successful - Elapsed Time 0 mins 30 secs Zone re-format was skipped. #2 (Fixing BSY or CC errors aka BUSY) Rst 0x20M ASCII Diag mode F3 T>/2 F3 2>Z Spin Down Complete Elapsed Time 0.127 msecs F3 2>U Spin Up Complete Elapsed Time 8.633 secs F3 2>/1 F3 1>N1 F3 1> Rst 0x20M ASCII Diag mode F3 T>m0,2,2,0,0,0,22 Invalid Diag Cmd Parameter F3 T>m0,2,2,,,,,22 Max Wr Retries = 00, Max Rd Retries = 00, Max ECC T-Level = 14, Max Certify Rewr ite Retries = 00C8 User Partition Format 3% complete, Zone 00, Pass 00, LBA 00004AA5, ErrCode 000 00080, Elapsed Time 0 mins 30 secs User Partition Format Successful - Elapsed Time 0 mins 30 secs Zone re-format was skipped. F3 T> ps.: I´d also tried the G-List step command and the reset (F,,22) command without any succeed!