adromeda
Content Type
Profiles
Forums
Events
Posts posted by adromeda
-
-
@WPI Guru
This wasn't the question.
You don't know if this is a clean room or not, so please don't judge.
The questionis what are the chance with this already existing problem?+---0 -
In my case a
ST32000350AS
The Drive spins down after a few seconds by it self, even if I don't disconnect the PCB from the head controller.
What I have done:
F3 T>/2 <Enter>
F3 2>Z <Wait a few seconds after drive spins down by it self than hit enter>Spin Down Complete
Elapsed Time 12.293 secsF3 2>U <Enter>Error 1009 DETSEC 00006008Spin ErrorElapsed Time 33.919 secsR/W Status 2 R/W Error 84150180
The result is always the same, if I disconnect PCB before or not!
After cleaning hasn't work I have finally opened up the drive to see this:
There tow rings on the disk, one exactly at the parking position, one a bit bigger a few millimeters away. When I start the HDD with open case you see the head clicking back and forth a few times and than stopping at the outer ring!
Is there anything I can do?0
The Solution for Seagate 7200.11 HDDs
in Hard Drive and Removable Media
Posted
I have experimented on Disk Drives before in this room. And to say it is a 98% chance to brake things is just wrong. I have tow drives who have been completely overwritten several times - after opening them! 256GB & 512GB
There is in most HDDs a mechanism to catch dust particles before they become a danger!
It is not that I have important Data on does Drives, but they are o.k. And is it wrong to say you open a HDD in an „non clean room“ and it instantly kills the drive! Even if this ceiling here has drooped some dust on it, most likely it will do nothing!
I just would like to know why there would be high chance to fix this drive, when there are already some trails on the disk. How could this be?
And when I would want try, what should I do?