kostas275

the seagate company is impossible to replace my hard disk to new ?

now to fix my drine and update the new firmware, i trust the hard drive after that ?

the only broblem is the drive not leaves to update the firmware . what to do ?

thanks for the solution i fix the hard disk

i dont understand could you please tell me what is the next step to do ?

ok everything i see bios but the windows not see what to do ? update the firmware ?

help after this point (F3 1>N1 (enter) Which will simply return the level one prompt F3 1> At this point, many say you need to disconnect the SATA power cable from the drive and wait one minute. Yes, count to sixty. Then plug the SATA power cable back into the drive. There is a bit of debate about this step in the forums but that is what I did and it worked fine in my case. *IF and only if* you choose not to disconnect drive power temporarily, you need to at least change back to the test level prompt (type F3 1>/T (enter)) at this point before continuing. my ) no response to write the Type m0,2,2,0,0,0,0,22 nothing responding to my HyperTerminal what to do?

jaclaz ok i read the forum http://www.mapleleaf...agatebrick.html and i have a question . the forum say ( At this point, many say you need to disconnect the SATA power cable from the drive and wait one minute. Yes, count to sixty. Then plug the SATA power cable back into the drive. There is a bit of debate about this step in the forums but that is what I did and it worked fine in my case. *IF and only if* you choose not to disconnect drive power temporarily, you need to at least change back to the test level prompt (type F3 1>/T (enter)) at this point before continuing.)what to do ? what is your opinion to do disconnect the SATA power cable ?

sorry ,sorry ok lets go from the beginning. i have seagate barracuda 72000.11 . i work on my computer after restart my hard disk no found and not see to bios . i read the first page If ι understand to fix the problem there are two method 1. Fixing 0 LBA error and 2. Fixing BSY or CC errors aka BUSY . my broblem maybe is second solution ?

Finder the correct is 7200.11 . sam steps put card under the plate . my question is the card put from the first time ?

i have seagate barracuda 7222.11 . i work on my computer after restart my hard disk no found and not see to bios . this item fix my broblem ?