iamoris

Hi all, Ive browsed every forum done every possible fix and I get nothing... Here is what ive done. I have an HP Compaq 8200 elite sff pc that uses Intel® Desktop/Workstation/Server Express Chipset SATA AHCI Controller.(ive used both intel and hp drivers) I created my image with riprep, its running xp sp3. my sif (located at i386\Templates\riprep.sif) [unattended] OemPreinstall = yes OemPnPDriversPath = "\textmode;\\%SERVERNAME%\RemInst\%INSTALLPATH%\te xtmode;\i386" FileSystem = LeaveAlone ExtendOEMPartition = 0 TargetPath = \WINDOWS OemSkipEula = yes InstallFilesPath = "\\%SERVERNAME%\RemInst\%INSTALLPATH%\%MACHINETYPE %" LegacyNIC = 1 [MassStorageDrivers] "Intel® Desktop/Workstation/Server Express Chipset SATA AHCI Controller" = "OEM" "IDE CD-ROM (ATAPI 1.2)/PCI IDE Controller" = "RETAIL" [OEMBootFiles] iastor.Sys iastor.cat iastor.inf iaahci.INF iaahci.CAT Txtsetup.oem When I have the Mass Storage Drivers and OEM Bootfiles in the sif i get the txtsetup 21 error. When I remove it from the sif i get the "SETUP DID NOT FIND ANY HARD DISK DRIVES" I tried the TXTSETUP.oem as it comes as well as editing in the exact driver under default and disk listed below(can provide FULL if needed): [Disks] disk1 = "Intel® Desktop/Workstation/Server Express Chipset SATA AHCI Controller", iaStor.sys, \ [Defaults] scsi = iaAHCI_DesktopWorkstationServer ;################################################# ############################ [scsi] ; iaAHCI.inf iaAHCI_ESB2 = "Intel® ESB2 SATA AHCI Controller" iaAHCI_7RDH = "Intel® ICH7R/DH SATA AHCI Controller" iaAHCI_7MMDH = "Intel® ICH7M/MDH SATA AHCI Controller" iaAHCI_8RDHDO = "Intel® ICH8R/DH/DO SATA AHCI Controller" iaAHCI_8MEM = "Intel® ICH8M-E/M SATA AHCI Controller" iaAHCI_9RDODH = "Intel® ICH9R/DO/DH SATA AHCI Controller" iaAHCI_9MEM = "Intel® ICH9M-E/M SATA AHCI Controller" iaAHCI_10DDO = "Intel® ICH10D/DO SATA AHCI Controller" iaAHCI_10R = "Intel® ICH10R SATA AHCI Controller" iaAHCI_5 = "Intel® 5 Series 4 Port SATA AHCI Controller" iaAHCI_5_1 = "Intel® 5 Series 6 Port SATA AHCI Controller" iaAHCI_5_1_1 = "Intel® 5 Series/3400 Series SATA AHCI Controller" iaAHCI_DesktopWorkstationServer = "Intel® Desktop/Workstation/Server Express Chipset SATA AHCI Controller" iaAHCI_Mobile = "Intel® Mobile Express Chipset SATA AHCI Controller" ; iaStor.inf iaStor_ESB2 = "Intel® ESB2 SATA RAID Controller" iaStor_7RDH = "Intel® ICH7R/DH SATA RAID Controller" iaStor_7MDH = "Intel® ICH7MDH SATA RAID Controller" iaStor_DesktopWorkstationServer = "Intel® Desktop/Workstation/Server Express Chipset SATA RAID Controller" iaStor_Mobile = "Intel® Mobile Express Chipset SATA RAID Controller" ;################################################# ############################ My folder structure is as follows at the moment: i386 TEXTMODE I have tried putting the textmode folder in $oem$\textmode $oem$\$1\textmode NOTHING At wits end here, I cannot get this going. Thank you in advance for any help. Please let me know anything I can provide you with.