pankaj

Hi...you can use kespersky antivirus and windows firewall . this combination is best...

Hi.... I would suggest you to put the computer in Clean boot state and see if the issue is caused by any third party applications interfering with the normal application of the computer. To perform a clean boot on a computer that is running Windows 7, follow these steps. 1. Click Start, type msconfig in the Start Search box, and then press ENTER. If you are prompted for an administrator password or for a confirmation, type the password, or click Continue. 2. On the General tab, click Selective Startup. 3. Under Selective Startup, click to clear the Load Startup Items check box. 4. Click the Services tab, click to select the Hide All Microsoft Services check box, and then click Disable All. 5. Click OK. 6. When you are prompted, click Restart. 7. After the computer starts, check whether the problem is resolved. If your issue is resolved, follow the How to Determine What is Causing the Problem section in the KB article to narrow down the exact source. http://support.microsoft.com/kb/929135

you can installing Windows 7 on USB with the help of this procedure: 1. First of all, connect your USB to the machine and backup all the data from the USB drive. 2. Download VirtualBox portable, double-click on the executable file and extract the contents to your USB. 3. Now, go to the VirtualBox portable folder in USB, and execute the Portable-VirtualBox (.exe) file. 4. From here onwards, you need to follow the onscreen procedure to create a virtual disk and install Windows 7 on USB. Follow the install Windows 7 on VirtualBox guide to complete the process. 5. Once you finish the installation process, you can safely close VirtualBox and remove your USB drive. 6. You can now use this Windows 7 USB drive on any Windows machine that you want. To use Windows 7 on other machine, connect the Windows 7 USB, open USB drive, and run portable-VirtualBox file.

nope you can't interchange the product keys...you have to use them on 32 bit....

you can check this link http://support.microsoft.com/kb/836941

Hi...you can use the following process to extend that trial period legally... •Type cmd into the Start Menu Search • Right click the cmd icon and choose “Run as Administrator” •Type slmgr.vbs -rearm then press Enter •You will then be asked to reboot. After that, right click Computer, then select Properties. You’ll see that the counter has been reset to 30 days. This only works 3 times and the counter never goes past 30 days, so make sure to wait until you have 1-3 days left before using it

Interesting link, literally: hxxp://h10025.www1.hp.com/ewfrf/wc/... jaclaz thats the old link that i have so i gave it....

hi...sry this link is not working.that's an old link that i had... but to increase your recovery disk space on your hard drive you can first open the cmd and then paste the link with your requirement : vssadmin resize shadowstorage /on=[the drive letter for your recovery disk]: /for=[the driver letter for your recovery disk]: /maxsize= [the size you want your recovery disk to be] ok...

yeah i got it....and thnx....

Hi i hope you can find something useful for you on the below link http://h10025.www1.hp.com/ewfrf/wc/...

Hi you can use this process.... -Disable User Account Control (UAC) and reboot; -Go to Start and type cmd in the search box; -Right-click on cmd.exe (should be at the top of the list) and select Run as administrator; -In the newly created command prompt box, type the following (pressing enter after each line): -Code: bcdedit /set testsigning on bcdedit /set loadoptions DDISABLE_INTEGRITY_CHECKS Note: DDISABLE is NOT a typo! Install the problematic driver and reboot; Your driver should now load successfully and you may now enable UAC! always double-check the source and verify the application publisher otherwise they can harm your pc

yeah you can use Winrar to unzip programs and you can find your product key by the following process... If you have Remote Admin on that particular machine, look in: HKEY_LOCAL_MACHINE/Software/Microsoft/Windows/CurrentVersion There you should find several keys giving product info; ProductID, ProductKey, ProductName, etc. OR You can find the Product key with any of these: http://www.webtree.ca/windowsxp/ViewKeyXP.exe http://www.aida32.hu/aida-download.php?bit=32 http://www.magicaljellybean.com/keyfinder.shtml http://www.belarc.com/free_download.html

Hi for removing the msg showing windows defender is turned off you can do this... In msconfig/services you need to uncheck Windows Defender. Then in msconfig/startup you need to uncheck Microsoft Windows Operating System where the command line is '%Program Files%\Windows Defender\MSASCui.exe -hide'. Restart and the troublesome warning message about Defender being disabled goes away. :-) and for second problem you have to tried search on google...i hope you will find some help.... thats it...

Hi.. you can try FixWin Utility from the below link http://www.thewindowsclub.com/repair-fix-windows-7-vista-problems-with-fixwin-utility hope this will work for you....

Hello everyone! I just got the BSOD on my Compaq Mini 110c I can only access safe mode. Here is the error code STOP: 0x0000008E (0x0000005, 0x806373F1, 0XA770199C,0x00000000). What did do from doing research is scanned the registry, scanned for virus, and spyware while in safe mode, but I still get the BSOD? Also, I tried to access the partition using F11 and Alt-F11 while booting and it does nothing. Any suggestions? Thank You You are getting this error code due to following reasons... Option A 1.) Update your Windows XP with the latest Service Pack. Download the latest Service Pack 3 from Microsoft. Refer to Microsoft KB on You receive random "0x0000008E" error message on a blue screen in Windows XP . Option B Possible causes of this error may include the following: •Hard disk damage •General hardware configuration problems with the BIOS, the memory, the hard disk, or with other devices •Incompatible device driver •Incompatible software Refer to Microsoft KB on http://support.microsoft.com/kb/945658/.

I think for solving this you have to go to internet option in control panel and then connections and in connections you have to set up the option Dial whenever connection is not present and then click ok..after that it only dials a connection when a connection is not present... hope this will help you.....

What you are refering to as a Start Menu Picture is i think actually the User Account Picture.... On a normal install they are located in C:\Documents and Settings\All Users\Application Data\Microsoft\User Account Pictures\Default Pictures

Yes you can Transform Windows XP into Windows 7 without using the customization Pack.... http://tinyurl.com/676esa hope this will help you...

Hi caji316.... for Repairing the .NET Framework without uninstallation you can do that... There are two options to repair the .NET Framework Option A: Repair the .NET Framework 1.1 by using the command prompt Locate the Dotnetfx.exe file that you used to install the .NET Framework 1.1. To do this, use one of the following meth If you installed the .NET Framework 1.1 from a CD or from a DVD, insert the installation disc in your CD drive or DVD drive.If you installed the .NET Framework 1.1 from your hard disk, download the .NET Framework 1.1 Setup program to your hard disk. If you installed the .NET Framework 1.1 from a network drive, reconnect to the network drive. Click Start, click Run, type cmd, and then click OK. At the command prompt, run the following command: %InstallationPath%\dotnetfx.exe /t:%temp% /c:"msiexec.exe /fvecms %temp%\netfx.msi" Note %InstallationPath% is a placeholder for the path of the Dotnetfx.exe file that you located in step 1. Option B: Repair the .NET Framework 1.1 by using the Windows Installer cache file Click Start, click Run, type Installer, and then click OK. On the View menu in Windows Installer, click Details. Do one of the following, depending on your operating system: In Windows XP, right-click the Name column header, and then click Comments. In Windows 2000, right-click the Name column header, and then click Comment. Right-click the cached Windows Installer file that has the Microsoft .NET Framework 1.1 RTL x86 enu comment, and then click Repair. After the repair process is complete, exit the Installer and for more help you can go on that link http://support.microsoft.com/kb/824643

Hi Caji316...i think you can find something for you on these two links... http://www.howtogeek.com/howto/windows-vista/dealing-with-windows-vista-time-sync-problems http://support.microsoft.com/kb/223184

Hi bdjfreestyle, "Homegroup" is a new feature in Windows 7 which allows to share files and printers on a home network quickly and easily.. You can try the following if you wana share out the drive..... right click and choose share with and then advanced sharing and select advanced tab and check on share this folder follow by apply and atlast ok....

Hi chuikingman...for your problem broadband connection not work you can use this.. http://support.microsoft.com/kb/314869/en-us at the end of the page it states, applies to XP Home en Pro... the next one is for config vpn's : http://support.microsoft.com/kb/314076/en-us I hope this will help you...

Hi kmuland...i think this is just because of that you have installed many programs and softwares on your pc...and your cpu usage is more so that you having a problem of slow speed..if you want to check it out you can open your task manager and then get the cpu usage...and if it is high then you have to remove some programs those are making your pc slow and you can find them in task manager and then process... i hope this will help you....

Hi Colore,It should be safe to delete any files in that directory. As the directories name suggests... only temporary files should be sent there. However, there are some programs that send log files to temp directories and you will not be able to delete them unless you go into safe mode..but you need not to worry for that. If you are looking to delete the "temporary internet files" folder contents then the suggested method is via Internet Explorer's TOOLS > Options > Browsing History / delete... > etc... The "Temp" folder next to it is usually used for programs while they are being installed and what you see are the leftovers that should've been cleaned out but were not...

Hi santanu933,to fix ,this erore message 0x0000007E you can go to this site and i think it will help you to fix this error..http://support.microsoft.com/kb/330182 . I hope this will work for you....