nuggetbro

I have a Dell E6410 and a HP DC7100. I am trying to get them to RIS happily together with no luck at all. Basically, the DC7100 will RIS fine, if I don't have anything but - [MassStorageDrivers] "IDE CD-ROM (ATAPI 1.2)/PCI IDE Controller" = Retail If I go and add - "Intel® ICH8M-E/ICH9M-E/5 Series SATA RAID Controller" = OEM It blue screens with 0x0000007E If I remove the line it builds fine. Below is what my TXTSETUP.OEM looks like - ; Copyright © 2003-10 Intel Corporation ;############################################################################# ;# ;# Filename: TXTSETUP.OEM ;# ;############################################################################# [Disks] disk1 = "Intel® Rapid Storage Technology Driver", iaStor.sys, \ [Defaults] scsi = iaStor_8ME9ME5 ;############################################################################# [scsi] iaStor_8ME9ME5 = "Intel® ICH8M-E/ICH9M-E/5 Series SATA RAID Controller" ;############################################################################# [Files.scsi.iaStor_8ME9ME5] driver = disk1, iaStor.sys, iaStor inf = disk1, iaStor.inf catalog = disk1, iaStor.cat ;############################################################################# [Config.iaStor] value = "", tag, REG_DWORD, 1b value = "", ErrorControl, REG_DWORD, 1 value = "", Group, REG_SZ, "SCSI Miniport" value = "", Start, REG_DWORD, 0 value = "", Type, REG_DWORD, 1 ;############################################################################# ; iaAHCI.inf [HardwareIds.scsi.iaStor_8ME9ME5] id = "PCI\VEN_8086&DEV_282A&CC_0104","iaStor" Can you guys see anything wrong with what I am doing? How come the DC7100 can build with no mass storage drivers? Thank you.