Jump to content

imiimi

Member
  • Posts

    5
  • Joined

  • Last visited

  • Donations

    0.00 USD 
  • Country

    Iran, Islamic Republic Of

Everything posted by imiimi

  1. @ VideoRipper thanks, i'll test new commands. yesterday i find out how N1 command will work in my case, i should first use m0,2,2,,,,,22 and after that N1 will work! and show something like this: "SMART Cleaned" but i didnt fix anything. it made me angry and i use m0,,,,,,,22 and it formated 100% in 163min!!! but after that still my drive doent work. u think my data is still there!?
  2. no i'm sure every command are similar between Maxtor and Seagate but must be a something wrong!!! i think hardware because even i could do G-List command but just SMART comand it show that error! 2 questions: 1. i dont have laptop so i did that by one PC so RS232toTTL and HDD conections all conected to one PC, does it make any problem? 2. how can i find out heads working fine?
  3. i did everything good but when i typed N1 i gave this error: Init SMART Fail LED:000000CC FAddr:0024E3A7 LED:000000CC FAddr:0024E3A7 LED:000000CC FAddr:0024E3A7 . . . LED:000000CC FAddr:0024E3A7!!!!!!!!!!!!! whats happened, i did every thing good?!!!! please help me i though my HDD has LBA-0 so i did Ctrl+Z and then m0,2,2,,,,,22 but it finished so soon showed: Max Wr Retries = 0, Max Rd Retries = 0, Max ECC T-Level = 16, Max Certify Rewrite Retries = not supported whats i have to do heeeeeeeeeeeeeeeelp!!!!! (
  4. thanks a lot for fast response u helped me so much i'll test it
  5. hi , i have STM3500418AS Dimondmax 23 500g ,after i update to new version firware CC3D and see problem in my HDD and that was similar BSY error that u said. anyway, i didnt find RS232toTTL so i decided to create it (by schematic that Master VideoRipper put), i did it but i mixed up by ground connections?! 1. in schematic, connected GND of HDD Jumper to 15(IC) but in first post tutorial we dont use GND of jumper!? 2. can i connect all GND (DB9 , C5, C6, 15) to themselves? (GND is shared for all of them?) excuse me for my bad english and very bad knowledges
×
×
  • Create New...