I believe my steps are correct, please correct me if I'm wrong. These are my steps: 1 - Remove or separator in the top 3 contacts the controller. 2 - connect rx, tx and mass 3 - connect SATA power 4 - open hyperterminal 5 - Configure Connection COM10, 38400, 8, nothing, 1, none 6 - Ctrl + z 7-T responds F3> 8-type 2 9 And from that step always responds LED: 000000CC FAddr: 0025BF67 LED: 000000CC FAddr: 0025BF67 Greetings and thanks for the help.