CrazyDoctor

Hi All, I have this hard drive http://img168.imageshack.us/i/wd1p.jpg/ http://img687.imageshack.us/i/wd2l.jpg/ On the green PCB two of the chips are brunt (which easily can be seen as burnt). I want to buy from ebay one of those of hard drives in order to replace the pcb. What is the correct one? http://shop.ebay.com/i.html?_nkw=WD5000AAKS-00YGA0&_sacat=0&_trksid=p3286.m270.l1313&_odkw=WD5000AAKS&_osacat=0&bkBtn= I think that this is the best match: (not sure) http://cgi.ebay.com/Western-Digital-WD5000AAKS-00YGA0-500Gb-SATA-DBRNHT2AAN_W0QQitemZ350332294797QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item51916e968d Many Thanks!

Hi Peter, Thank you very much for your great help! I did the actions as you guied, but nothing happend. I connect all the wires (Which I hope that I did it right: The black wire is GND, the red is TX and the white is DX), and connect it to the terminal, but I don't see any respond (I connected sata power to the hard drive). Nothing happend when I hit the sequence Ctrl + Z (Somthing like F3 T> should appear after that but it didn't). I switch the wires for case that I plug it wrong but still nothing. I can't think about what I do wrong. Is the connector doesn't do its purpose? What can I do? Many Thank!!

Hi All, I have WD PCB which one of the little chip is burnt (which can be seen easily). Does any one do the replacement of this chip? Soon I will upload the picture of the dead PCB. Regards,

Does anyone know this program ? And what does it do? Do I need a special equipment for useing this software, besides a good computer with a good motherboard and standart IDE/STAA cables? http://sediv2008.narod.ru/ The link for downloading the program http://sediv2008.narod.ru/Easy1014.rar English documentation is available: http://sediv2008.narod.ru/HelpEn.rar Many Thanks!

Hi all, I have old hard drive (see the pictures) http://img203.imageshack.us/i/maxtor1.jpg/ http://img189.imageshack.us/i/maxtor2.jpg/ Which suddenly recognize as 0 capacity. I can see the name of the hard drive in the bios but all the data which shown is 0. What can I do to fix that (besides to go to a DR proffesional)? Is a pcb replacemant will fix that? Any suggestions? Many Thanks!

Hi Peter, Thank you very much for your help! I wish everyone would be like you! I plug 2 of the 3 wires that I have (whit- don't know what it is, Black - RX, Red- TX. Am I right?) I followd after the guid here: but the terminal does not respond. When I hit Ctrl + z does not appear on the scren the letters: "F3 T>m". is this the right sequence? It looks like nothing happen at all. What should I do? Many Thanks Peter and have a great weekend!

Hi Peter, On the black chip the markings are: MAX3232 CSE 0916 by the way, I got this adaptor from ebay http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=250393926347&ssPageName=ADME:L:OU:US:1123 Many Thnks and have a great weekend!

Hi peter, what is the datesheet? and what is lc? By the way, Ctrl + Z does not give me F3 T> in the terminal. What do I do wrong? or when I will connect the adapter as it should be, the terminal will also work as it should be too? Many Thanks!

Hi all, I have seagate hard disk 7200.11 with 0 lba problem. following few guides whic I find in the internet, I bought the nessecery as can be seen here: http://www.msfn.org/board/topic/128807- ... 0011-hdds/ how and where do I connect the wires to the TTL adapter? see the pictures and please tell met whic pin should I connect with a wire. http://img384.imageshack.us/i/dsc03845.jpg/ http://img59.imageshack.us/i/dsc03844.jpg/ Many Thanks!!

The symptom are the same as mine in this link. I attached phots of the hard drive. http://img148.imageshack.us/i/dsc03835.jpg/ http://img130.imageshack.us/i/dsc03833w.jpg/ as you can see the mini usb port is onboard the pcb. What can I to retrieve my data? Best Regards,

Thanks for the response. I've tried to do that but the comptuer does not find any suitable driver for this. I tried to install some diffrent drivers from that list but nothing cause to my hard drive to get back to life. Any suggestions? Many Thanks!

I have 2.5 external hdd which suddenly required a driver which I don't have. The device manager show a yellow question mark "USB Device". I don't have an access to my data. I've already tried to plug it in few other computers and of all them show the same symptom. I took out the hard drive from it enclosure but the pcb does not have an IDE or sata connection. The only connection that I can see is the mini usb port which is built on the pcb. I've tried diffrent mini usb cables and it gives the same symptom for all the them. Any suggestions? How can I fix that? Is there any driver which can solve the problem? Many Thanks!

Hi, I know that the factory does not sell or suply them but there are external website on the net which sell those parts. What are those websites? And how can I get firmware for my defective hard drives? Many Thanks!!

Hi All, Where can I get parts such as PCB, Heads ETC and firmware for defective hard drives? Many Thanks!!