MSFN is made available via donations, subscriptions and advertising revenue. The use of ad-blocking software hurts the site. Please disable ad-blocking software or set an exception for MSFN. Alternatively, register and become a site sponsor/subscriber and ads will be disabled automatically.
My 1TB Seagate hard disk was detected by BIOS but was shown as 0MB hard disk. Before I read this fix, I upgraded the firmware from SD15 to SD1A Now I tried the 0LBA fix and following is my result After the command F3 T>m0,2,2,0,0,0,0,22 Max Wr Retries = 00, Max Rd Retries = 00, Max ECC T-Level = 14, Max Certify Rewr ite Retries = 00C8 User Partition Format Successful - Elapsed Time 0 mins 00 secs But still the hard disk is shown as 0MB hard disk So I tried the command F3 T>m0,1,1,0,0,0,0,22 I got the result ending with User Partition Format 5% complete, Zone 00, Pass 01, LBA 003BE6E2, ErrCode 000 00080, Elapsed Time 35 mins 00 secs DiagError 0000500D User Partition Format Failed - Elapsed Time 35 mins 00 secs R/W Sense 00000002, R/W Error 84400080, File Error 00000000 Blk Addr 01080001, Blk Addr Type 00, Cyl FFFE0000, Hd 5A Please help