Jump to content

nino

Member
  • Posts

    4
  • Joined

  • Last visited

  • Donations

    0.00 USD 
  • Country

    Sweden

Everything posted by nino

  1. It was my false checked it when I had read the post again. If someone have the same cable from Bluestar (Bluestar.pl) The setup is: black GND, white RX, blue TX. At the first time I made a misstake and connected TX with TX and RX with RX (because I thought white is TX an blue RX). But it was ok. It destroyed nothing (only Hyperterminal wasn't able to communicate with the HDD). I fixed it with a ca-42 Cable annd a sheet of paper So many thanks to Gradius 2, my77stang (overclock.net forum), the youtube guy (http://www.youtube.com/watch?v=29FztWJVxbM&feature=PlayList&p=B2DFC95751AC2830) and the other helpers :-)
  2. Thanks for answer Valkyrio, I restored it. read above
  3. Okey i have done everypart in the guide succsesful but when it comes to: "Power OFF/ON the drive (very important!) Wait 10 seconds and now Power ON your drive. Press CTRL+Z on terminal and type:" The terminal wont let me type after i pressed CTRL-Z. What can be wrong? I am still connected. *edit* Okey this is unbelievable. I successfully restored my harddrive!! Something made my cable disconnect and loose all my drivers to the cable when i disconnected the power from the harddrive in "Wait 10 seconds and now Power ON your drive". I reinstalled the drivers from this page: http://www.the-stickman.com/files/irda-ma6...ivers-Dynex.zip and went to hyper terminal again. I tried to connect and it connected but i couldn't type anything. After a little research i tried to change the com port on hyper terminal to the same as the one that was given by Windows. I tried CTRL+Z again and it worked! I just resumed with the "m0,2,2,,,,,22"- command and pressed enter. Then i got the successful format message and replugged the harddrive to the computer and rebooted. And it worked. I am so happy i didn't think i would made this but i did it, and i am so glad. I want to thank everyone on this forum that are charing all you thoughts and infos. And i want to thank Nitrohelix that made this video that made everything so simple: http://www.youtube.com/watch?v=29FztWJVxbM Thank you
  4. Pdogg i think i have the exact same cable. Do you have a plastic cover under the blue rubber?
×
×
  • Create New...