fuoriser

Well, that's strange. The guide has proved to work in several hundreds of cases for "AS". The other thread worked for the "NS", at least in a few cases. Maybe you have a firmware "HP24"? http://forum.hddguru.com/seagate-7200-firm...are-t11755.html Did you "wait enough" after power on/before the Z? Check this guide also: http://sites.google.com/site/seagatefix/Home jaclaz Hi, my firmware is HP24. In the procedure my hyper terminal print me always: LED:000000CC FAddr:0024900D LED:000000CC FAddr:0024900D LED:000000CC FAddr:0024900D LED:000000CC FAddr:0024900D Do you have any advice to recover my HD? Thanks! Bye!

Well, that's strange. The guide has proved to work in several hundreds of cases for "AS". The other thread worked for the "NS", at least in a few cases. Maybe you have a firmware "HP24"? http://forum.hddguru.com/seagate-7200-firm...are-t11755.html Did you "wait enough" after power on/before the Z? Check this guide also: http://sites.google.com/site/seagatefix/Home jaclaz Hi jaclaz thanks again. Because I am out for work I will try the 2nd link in 15 days. Bye!

Yes. Will it work? See if this works: http://www.msfn.org/board/unlocking-termin...te-t129551.html Read CAREFULLY! It is not clear WHICH are the terminals to be shorted. Be very careful to NOT short anything else. Read, re-read and re-re-read the info, make sure you find a "safe" way to attempt the shorting, do some tests with the hard disk NOT connected to power. Your mileage may vary. Doesn't the "normal" approach work? Maybe the Italain translation of the original guide helps: http://www.msfn.org/board/riparazione-seag...no-t129366.html The currently easiest and all-in-one tutorial is here: http://www.msfn.org/board/debricking-seaga...87.html&hl= jaclaz Thanks for guide with unlock buy my HD is not ST******NS series but ST******AS and hence the procedure doesn't work. I have just followed italian guide without result. Thanks! Bye!

Hi, I'm a new user in the forum. I'm trying to repair my HD Seagate Barracuda 7200.11 ST3500620AS with BSY error. HyperTerminal print me: LED:000000CC FAddr:0024900D LED:000000CC FAddr:0024900D LED:000000CC FAddr:0024900D LED:000000CC FAddr:0024900D I have also tried after disconnection of the PCB (circuit board) from the hard drive case, but HyperTerminal print me the same line. Can you help me? Thanks! Bye!