Jump to content

TomD

Member
  • Content Count

    1
  • Joined

  • Last visited

  • Donations

    $0.00 

Everything posted by TomD

  1. Thanks for the guide, I've managed to fix mine. I have a few troubleshooting tips for those having problems. I used a serial cable and RS232 to TTL converter. If you are not getting any response from the drive at all, you can use a loopback test to test if your setup is working. Note: The following tests do not need the hard drive at any point! Start off with just your serial cable. To perform the loopback test, simply connect TX and RX directly to each other, so that anything you send is sent straight back. On a 9 pin RS232 cable this is done by connecting pin 2 to pin 3, I simply used a bit
×
×
  • Create New...