whterbtobj
Content Type
Profiles
Forums
Events
Posts posted by whterbtobj
-
-
diskpart clean <-- only cleans the MBR
diskpart clean all <-- write zero to every sector
0 -
Does anyone know how to remove the hibernation tab?
0 -
What if the connection name is a GUID?
0 -
For some reason it started working now. the only changed I made after the video and bios update was uninstall HP's embedded security.
0 -
no updating video driver did not work. I also updated the bios as well but that didn't work either.
0 -
make sense, I'll give it a shot and get back to you guys, thanks.
0 -
Its a HP Compaq 6710b Notebook
Intel Core 2 Duo T7300 2 GHz 4MB L2 Cache, 800 MHz FSB
Intel 965PM
1024 MB, DDR2 PC5300 667Mhz SDRAM, 1x 1024MB, max. 4096MB
INTEL GMA X3100 - 0 MB Clockrate Chip/VRAM: 200/200MHz
15.4 Zoll 16:10, 1280x800 pixel, WXGA TFT Display, glossy: no
120GB 5400rpm Seagate Momentus ST9120822AS
Intel 3945ABG Wireless LAN, 10/100/1000 Gigabit LAN, 56K Modem, Bluetooth 2.0
Vista Business SP1
0 -
Whenever I start an action that should prompt the UAC window into popping up and asking me permission I enter in my admin credentials then the system locks up with the whole desktop grayed out untill I press Ctrl+Alt+Del. Does anyone know a solution to this problem?
This happens only on a user account.
If you're a member of the admin group. The system is set to only prompt and not prompt for credentials. If I set it to prompt for credential then the system will freeze and I cannot do any admin stuff.
0 -
How can I assign static ip to two network cards in WinPE?
I want to be able to ping from one network card to the other for a simple network card test.
0 -
Is WinPE 2.0 compatible with Non-ACPI? Can I make it compatible?
0 -
thanks for the reply...I found a solution. I needed to build my image with pnp.
0 -
I'm booting from RAM disk. How do I make my display 800x600 32bit?
0 -
Does anyone know how WinPE locks the CDROM from ejecting?
0 -
I was able to create a compressed SDI image following there instructions http://www.myitforum.com/articles/8/view.asp?id=8832
and I was able to make it small enough to boot off a 128 MB RAM.
0 -
I have a WinPE Image that runs on ramdisk.
I want to run my own shell. Here is what my Winpeshl.ini looks like
Winpeshl.ini
==============
[LaunchApp]
AppPath = D:\myShell.exe
I don't want to hard code the"D:\"
Can I run a script and set %CDROM% as an environment variable and be able to run
%CDROM%\myShell.exe in Winpeshl.ini?
Anyone out there have a solution?
0 -
NTFS compressed may work for me. Can anyone provide more information about it?
0 -
Thanks jaclaz, I'll look into it and get back
0 -
How can I prevent WINPE from locking the cd-rom drive? I want to be able to eject the cd-rom and reboot the system. I have tried using the RAMDISK and it works. However, I have systems that only have 128MB of RAM. Therefore RAMDISK is not an options. I'm also required to use WINPE version 1.6.
It it possible to exit WINPE and enther DOS mode? that way WINPE would release the CD-ROM drive.
0
Detect USB drive after booting into WINPE 1.6
in Windows PE
Posted
WinPE only detects the USB drive if I boot the computer with the drive connected. Is there a way to detect the USB drive after WinPE has booted? I'm using WinPE 1.6.