newprouser

the problem seems to be resolved now (hopefully). I did not do any changes, so I'm equally puzzled.

I tried all of them , but still the problem persists. One thing to note is that, it works fine with opera turbo, which would not be possible if its a case of DNS or hosts file problem.

the site for which I'm facing the problem is www.indiachatforum.co.cc and its getting (always) redirected to www.chat.co.cc as I mentioned before not everyone accessing it is facing the problem. well i was using open DNS at the time of problem, i tried changed back to my ISP's dns and still the problem persists. my hosts file has no problem, i've checked it. p.s : A small doubt - hosts file is used only by IE and windows apps or ALL browsers refer to the hosts file ?

Hello all, I've a weird problem. when i try to access a website xxx.co.cc , its getting automatically redirected to another unrelated website yyy.co.cc while I tried using a different browser, the website opens , without images and in a purely text only fashion, clinking on some of the links, again redirects to the other website. I've spoken with the admin and some other members of the same site, and they have no problems. the same has been confirmed by co.cc and the webhost staff. only 2-3 people in all face this problem. another thing is that if the site is accessed through proxy, it works flawlessly. I used opera's turbo mode as proxy and thats the same case for the other people who faced this problem. Please advice, as to how to correct this issue thanks.

Thanks , but what about this ? To think this problem occured after 7 months, i've must been terribbly unlucky....

My HDD : Model : ST3500620AS Firmware : sd15 My computer crashes during BIOS loading and nothing responds but the harddisk keeps running. Click sound is heard once the HDD is restarted and thereafter it becomes quiet with only motor sound , so I guess I have the BSY problem. 1: I plan to use a USB to RS232 converter and RS232 Serial Port To TTL Converter Module MAX3232, pls tell me if the following h/w are OK. and Confusion In procedure : 2: In post #Post #1343, the step 3 says the HDD motor should automatically shutdown, but my HDD motor keeps running. So how to shut it down. After reading post #1 ,I thought the commands in step 4 (spin down) were used to shut it down.so this's a bit confusing. 3: After removing the PCB from HDA, the connection to HDD motor should be left as it is, right ? I'm a n00b so kindly bear with me if i ask any silly questions