litvinoven

I work with Runtimes R3 in WinXp Sp3 without any problems (nLite 1.4.9.1)!

Be careful with Winnt.exe: long file names may appear in \I386\ after integrating some updates or drivers (i.e. KB892130, ATI Catalist).

I am very sorry for delay! Problem with Sp3-pack installing with Winnt32.exe was solved! The system mentioned in my first post was installed successfully when I used original Wbemoc.inf. Real differences with nLite'd file are only in 5 lines: [WBEM.CopyMOFs] napclientprov.mof ;nLite add: ,napprov.mof napclientschema.mof ;nLite add: ,napschem.mof [WBEM.SYSTEMMOFS] cmdEvTgProv.mof ;nLite add: ,evtgprov.mof napclientprov.mof ;nLite add: ,napprov.mof napclientschema.mof ;nLite add: ,napschem.mof For my reduced system (without Nap, Wscenter and many others) 4 from mentioned 5 lines (nap*.mof) were deleted completely by nLite. So it was enough to delete nLite addition for cmdEvTgProv.mof. Next, according to: http://forum.oszone.net/post-799930-73.html (Russian forum) for successful Winnt.exe/Winnt32.exe Sp3-pack installation it is necessary to delete (or comment) 5 lines in Wbemoc.inf: [WBEM.CopyMOFs] napclientprov.mof napclientschema.mof rsop.mfl rsop.mof wscenter.mof Again, in my reduced system only 2 lines rsop.* (from these 5) were left after nLite, so I deleted it manually. After these 3 changes Wbemoc.inf was repacked and used for successful Winnt32.exe installation.

Hello, all. I used nLite many times (big thanks Huhi-!!!) with WinXp Sp2 Rus (with all hotfixes) successfully. Mostly I installed system with Winnt32.exe from hard disk. Now I integrate Sp3 in my pack. This full system works normally. But when I try to reduce this pack with nLite (ver. from 1.45.2 to 1.45.5-last!), I get system installed, but with the same errors regardless of nLite setting. My last variant of nLited Sp3 pack had minimum deleting: not needed hardware supports, all drivers (new ones are used), all keyboards and all languages. No system components or services were removed; no tweak or patches were applied. Options used were the same as for Sp2 (CABMerge, DupeFiles, RemoveMUI, CleanBiosInfo + DisableSRestore). Winnt.sif was corrected as for Sp2 (FileSystem=LeaveAlone, SFCQuota=0x00000000). Errors are the same as in http://www.msfn.org/board/Userenv-error-in...og-t116532.html topic: - Setup could not register the OLE Control C:\WINDOWS\system32\userenv.dll because of the following error: DllInstall returned error 2147746132 (80040154). - Setup could not register the OLE Control C:\WINDOWS\system32\eventcls.dll because of the following error: DllInstall returned error 2147549183 (8000ffff). - Setup could not register the OLE Control C:\WINDOWS\system32\swprv.dll because of the following error: DllInstall returned error 2147549183 (8000ffff). Services: "Internet Connection Firewall/Internet Connection Sharing", "System Event Notification" and "Security Center" are in Auto mode, but cannot start! Analyze shows that 8 services are not installed at all (not present neither in list nor in Registry): - COM+ Event System - COM+ System Application - Distributed Transaction Coordinator - MS Software Shadow Provider - Remote Desktop Help Session Manager - Terminal Services - Windows Management Instrumentation - WMI Performance Adapter Moreover, in \System32\Wbem\ very many files are absent (comparing with working full system): .mfl x24, .mof' x26, .xsl's x6 as well as dsprov.dll, fwdprov.dll, msiprov.dll, smtpcons.dll, tmplprov.dll, trnsprov.dll, unsecapp.exe, updprov.dll, wbemads.dll, wbemads.tlb, wbemdisp.tlb, winmgmt.exe, wmimsg.dll, wmipicmp.dll, wmitimep.dll. All these .ddl and .exe are present in Txtsetup.sif and Dosnet.inf. Registry analyze shows that nLite.inf processing was aborted after 3rd line of [T] section: HKLM,"SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\Auto Update","AUOptions",0x00010001,1 HKLM,"SOFTWARE\Microsoft\Windows NT\CurrentVersion\SystemRestore","DisableSR",0x00010001,1 HKLM,"SYSTEM\CurrentControlSet\Services\Sr\Parameters","FirstRun",0x00010001,1 <- aborted! HKLM,"SOFTWARE\Microsoft\Windows\CurrentVersion\Setup", "LogLevel", 0x10001, 0 Subsequent Registry corrections are not implemented and [TO] section is not processed (syssbck.dll, syssbck.inf are kept in \Inf\, nhelper.exe - in \System32\). What is wrongr? Is there any ideas?

Hello, all. I have absolutely the same problem! I had tried many variants and every time met this problem. Only in full system all is OK. In last variant I remove only: old and not used hardware supports, all drivers (and install my new ones), all keyboards and all languages. No system components are removed, no tweak are applied, etc. I compare this system with full one and found that only in \System32\Wbem\ more then 70 files are absent (incl. winmgmt.exe! but winmgmt.dll - present)!!! In Txtsetup.sif and Dosnet.inf all (?) these files are present (in both systems). All files from Sp2. Now I am investigating this problem. My system: WinXp Pro Sp2 Rus VLK with integrated Sp3 (last version), now with KB952287 and KB892130 hotfixes, installed by Winnt32.exe. nLite - 1.4.5.4. Many thanks Nuhi for nLite! P.S. Sp3: Administration -> Service -> Properties - "dependency tab" disappears! Is this a bug or may be adjusted?