Dorkmaster

I have tried it in another spot... I've even tried it with a separate controller card (although the BIOS recognizes the controller card, it doesn't recognize the drives plugged into the card, which is frustrating by itself...) (and yes, with that controller card, I've slipstreamed (AND separately as an F6 install), the drivers for that card in there...) So yeah, I've seemed to try almost everything conventional that I can think of to make this work... I've even plugged the drives into my existing desktop and tested each one. They all work. All drives have been formatted so they should operate normally, as if they were new. All drives have been switched around ports, just to make sure that the port wasn't the issue... I just used five in the screen shot as that was where I had it last. But yeah, I've tried SO MANY different things, and I simply find it hard to believe that this board has NO support... I just don't get it. I'll have to call for an RMA, but I don't think Newegg will support, as I'm like 6 days out of the 30 days of refund space... but we'll try.

I know... and that's the really frusturating part here... It seems that there truly is NO solution to this problem, which would seem to me to be a VERY obvious and common problem, as there is ONLY sata drive capability on this motherboard! I just don't understand it at all... How can this be a viable product, if there's absolutely no supported (or even hack-around) way to get past this issue? Ugh... And the worst part is, that I believe that my only option through Newegg is a replacement, as I'm past 30 days... So no refund. Oh well.. I learned QUITE A BIT from this experience... And really VascoMan, I really appreciate your help. You have a GREAT workaround... and I truly believe that if my stupid limited bios would accept it, it would work... I just don't have that capability, sadly... EDIT: Do you think I should attempt to create an entirely new topic for this? As now I think we've exhausted the possibility of simply modifying the existing drivers?

Okay... didn't work... Here are my options in BIOS... I'm including one page that I'm pretty sure has nothing to do with it, just in case...

Okay, so I'm totally trying this right now... HOWEVER, I don't have any option for AHCI mode on a Sata drive on my Bios... So is there anything else this might be called in my BIOS options? (I'm taking pictures of my options in BIOS now... let me know if that would help, and I'll upload em...)

I totally understand what you're saying here... And as far as the optical IDE drives, that's not really an issue, as once I can get WinXP running, I have an IDE+extra SATA card that will run those drives. I've put it in my home computer and it's working just fine. So the card should be plug-n-play recognized by windows. That's not an issue. I've got a USB external optical drive that seems to work just fine for the install, and then I'll do a lot of reconfig before saying everything is final. But yeah, as far as the drives go... I've tested them, they work fine. They've been reformatted, I've used the Data Lifeguard (WD diagnostic stuff) to write zeroes on the drive... I've done everything I can think of to ensure that there's nothing "still on the disk" because they were OEM drives... so who knows where they were before... but honestly, I'm like 99.999% positive the drives are not the issue... It's simply a matter of somehow getting WINXP recognizable drivers for the ICH9 SATA controller. And I can't seem to find that ANYWHERE! That's my main issue. Because everything you say is correct, it seems that everything is fine in textmode and then just as windows starts to hit, it can't find the new boot device of the hard drive it literally just spent about 20 minutes writing to... So that's where I could use some help! I cannot imagine that I'm the only person in the world who bought this mobo! Someone out there got it to work, and I don't know how, as Intel and Microsoft both do NOT make drivers for the NON-RAID Sata controller in ICH9... That's why I was originally so excited to see this starting post in the thread, but this is more written for someone with windows already running, not a virgin boot. But thank you, I very much appreciate it! And yes, I tried darn near everything before I posted here for help... I consider myself very knowledgeable about computers and components and such... I'm not looking for an easy-out... I'm looking for SOMETHING out, ya know? I'm trying this now... I'll update with more info! YAY, this looks promising!

thank you very much j7n, however, there are NO legacy PATA connectors... I used the JMicro controller drivers as kind of a hail-mary kinda thing... And if I'm entirely wrong (which is possible) and there ARE JMicron ones, then how would I identify those vs. the ICH9 ones? Because to my understanding the only ones (per the manufacturer) on the board are the ICH9 ones, as it natively would support 6 SATA inputs, but this board (while it has the space for it) only uses 4. (It's a budget board) EDIT: and for the record, in BIOS, I've set up the SATA drives as both ENHANCED and as COMPATIBLE with no different results for either. So, even if I make it Compatible, it's not changing anything. I've even tried plugging the drive into the SATA 5 slot (as technically sata 1&2, 5&6 are available only... there is no 3&4 although the board is ready to accept it should it be sottered in

I'm getting same error codes, but I've tried installing my Sata controller... Mind you, I've got a ICH9 Southbridge, so I'm not able to really, well, use ANYTHING as a true driver, as there doesn't seem to be anything ANYWHERE for that (which is odd, right?) So I'm kinda stuck... I've tried installing the drivers for the ICH9R thing (which is a raid-compatible motherboard, if I'm correct, which mine is NOT)... And I've tried modifying the driver as outlined in the sticky at the XP forum's top... but as this is a virgin boot as well (no OS installed ever, and all hard drives are new/clean) there's no windows to run registry in, or to do anything like that... So I'm totally frustrated and stuck. Any ideas? (for the record, I do have another post with much more detail in that sticky thread, but as this is the exact error, I figured I'd post here too... But I've found nothing that solves this particular problem for me...) EDIT: I've installed the drivers (various types, various configs) through both f6/floppy and through slipstreaming via nLite... just for the record there...

Spitted topic from: "How to enable AHCI on Intel ICH9 under XP" Okay, here's my situation, and I've spent well over 36 hours on this and it's driving me nuts! I trust you guys are much smarter than myself and I welcome ANY and ALL ideas on the subject: Another quick preface: I'm assuming this is on topic, by the way. If you know of a better topic thread I should be posting in, please please do refer me. I'm new here and I did try to search and came up with nothing... All that being said, first I present you with my basic info: I'm building from scratch. No preinstalled OS. Therefore, no way to implement half of these steps, like running a registry file, or whatever...) I'm attempting to install WinXP Pro (32bit). Here's my hardware specs (along with relevant info in parentheses): Motherboard: ECS G33T-M2 (BIOS seems to work just fine, recognizes all SATA-attached hard drives) Northbridge is G33 and Southbridge is ICH9 Memory: 4GB (4x1GB) G-Skill DDR2 800 (tested, seems to work just fine) Hard drives: (2) Western Digital CaviarSE 500GB drives (I'm attempting to simplify things though, so feel free to just ignore all other drives, and assume I'm using just one 500GB drive, as I have no problem adding the other drives once WinXP is installed!) ALSO, (2) 160GB Western Digital Caviar Drives Processor: Intel 775 Socket Quad-Core (Q6600 I think? Forgive me, as I'm tired...) I DO have a floppy drive, and I'm currently using an external USB CD-ROM, as my current optical drives are IDE, and I've got a card for that, but the BIOS doesn't seem to recognize that card, no matter what I do... So I'll put those in, after WinXP installs, I figure... If you need additional info let me know! Also, I'm installing with SP2 slipstreamed in, as the XP pro disc I've got is previous to ANY service packs. SO NOW THE PROBLEM: I'm continuously getting the BSOD, with the error 0x0000007B (0xF78D2524, 0xc0000034, 0x00000000, 0x00000000) HERE'S WHAT I'VE TRIED ALREADY: * Installing using my motherboard manufacturer's included drivers (they're unfortunately those pesky ICH9R ones, not plain old ICH9 ones.) (I've tried this using F6, and with nLite) * Installing using the JMicron drivers (although I'm positive that isn't the issue, as the specs for the mobo state that they're using ICH9 Intel specs, not JMicron... but after like 50 tries, yeah...) * Using non-textmode drivers (PnP) * Stripping down to basic components (mobo, memory, one hard drive, keyboard, etc) * Using SP1 instead of SP2 (ya never know...) And variations of combinations of the above. So... any ideas on how I can get this to work? I get all the way through installation, and before windows starts for the first time, the BSOD starts. Anything you folks can think of? EDIT: Also, although I feel comfortable with most things, this is my first build, so feel free to treat me as a total noob, so step by step is encouraged, just as I have been working with this for so long, that I'm willing to try ANYTHING to get it to install...