kenne

I have problems to join computers to Active Directorty, following error appears, look below this text. I get DHCP IP automatically and I can connect to Internet fine. Can someone help med with this problem?Note: This information is intended for a network administrator. If you are not your network's administrator, notify the administrator that you have received this information, which has been recorded in the file C:\Windows\debug\dcdiag.txt. The domain name "TEST" might be a NetBIOS domain name. If this is the case, verify that the domain name is properly registered with WINS. If you are certain that the name is not a NetBIOS domain name, then the following information can help you troubleshoot your DNS configuration. The following error occurred when DNS was queried for the service location (SRV) resource record used to locate an Active Directory Domain Controller (AD DC) for domain "TEST": The error was: "DNS server failure." (error code 0x0000232A RCODE_SERVER_FAILURE) The query was for the SRV record for _ldap._tcp.dc._msdcs.TEST Common causes of this error include the following: - The DNS servers used by this computer contain incorrect root hints. This computer is configured to use DNS servers with the following IP addresses: 192.168.1.10 - One or more of the following zones contains incorrect delegation: TEST . (the root zone)

Hi! How do I get rid off Mini Setup with unattended setup when the computer isn't connected to network or Internet. Only OEMSkipWelcome = 1 doesn't work. Here is my unattended file ;SetupMgrTag [Data] AutoPartition=1 MsDosInitiated="0" UnattendedInstall="Yes" [unattended] UnattendMode=FullUnattended OemSkipEula=Yes OemPreinstall=Yes Repartition=Yes OemPnpDriversPath="drivers\graphic\matrox" TargetPath=\WINDOWS DriverSigningPolicy=Ignore NonDriverSigningPolicy=Ignore [GuiUnattended] AutoLogon = Yes Logoncount = 1 AdminPassword=xxxxxxxxxxxxx EncryptedAdminPassword=No OEMSkipRegional=1 TimeZone=125 OemSkipWelcome=1 [userData] ProductID=xxxxx-xxxxx-xxxxx-xxxxx-xxxxx FullName="x" OrgName="x" ComputerName=ccc [Display] BitsPerPel=32 Xresolution=1024 YResolution=768 Vrefresh=75 [GuiRunOnce] "boot1.cmd" [identification] JoinWorkgroup=WORKGROUP [WindowsFirewall] Profiles = WindowsFirewall.TurnOffFirewall [WindowsFirewall.TurnOffFirewall] Mode = 0 [Networking] InstallDefaultComponents=Yes

Where can I download freeware program, which makes an bootable DVD of an harddrive? I a'm not keen to run DOS environment. Should also work under Windows 2000.

Is there any common path regarding USB-memory(flash) instead of an specific driveletter, example e:\?

Is it possilble to use the USB(memory-stick) instead of floppy disk with a unattended installation? Can someone help me with this issue?