soleil

Thank ! I have modified the unattend.txt file, at line [OemBootFiles] thus noved.inf become nodev.inf. I had the following error : Setup did not find any hard drives installed in your computer. Make sure any hard disk drives are powered on and properly connected to your computer, and that any disk-related hardware configuration is correct. This may involve running a manufacturer - supplier diagnostic or setup program. Setup connot continue. To quit Setup, press F3 How i can stop this error. Please help me. Regards

Hello, I made Win 2003 installation cd rom which unattend.txt. When I install this cd rom on server DELL PowerEdge 2950, the Windows program shut down and show this error: File txtsetup.oem caused an unexpected error (18) at line 1814 in d:\srv03rtm\base\boot\setup\oemdisk.c. please, can you help me to avoid this damage Thks unattend.txt ;SetupMgrTag [Data] AutoPartition=1 MsDosInitiated="0" UnattendedInstall="Yes" [unattended] UnattendMode=FullUnattended OemSkipEula=Yes TargetPath=\WINDOWS OemPreinstall=Yes OemFilesPath="..\$OEM$" OemPnPDriversPath="Drivers1;Drivers2;Drivers 3;Drivers4" [MassStorageDrivers] "DELL PERC5 RAID Controller Driver (Server 2003 32-bit)" = "OEM" [OemBootFiles] percsas.sys oemsetup.inf noved.inf percsas.cat [GuiUnattended] AdminPassword=* EncryptedAdminPassword=NO OEMSkipRegional=1 TimeZone=105 OemSkipWelcome=1 [userData] ProductKey=MX3BF-************* FullName="Technician" OrgName="Sté" ComputerName=Test_DBW [Display] BitsPerPel=16 Xresolution=1024 YResolution=768 [LicenseFilePrintData] AutoMode=PerServer AutoUsers=5 [RegionalSettings] LanguageGroup=1 [GuiRunOnce] Command0=GuiRunOnce [identification] JoinWorkgroup=WORKGROUP [Networking] InstallDefaultComponents=Yes txtsetup.oem # txtsetup.oem - for the PERC RAID family of RAID Controllers [Disks] d1 = "DELL PERC5 and PERC6/CERC6 RAID Controller Driver for Windows 2000", \megasas.sys, \ d2 = "DELL PERC5 and PERC6/CERC6 RAID Controller Driver (Server 2003 32 bit)", \percsas.sys, \ [Defaults] scsi = PERC_32 [scsi] MSAS_32 = "DELL PERC5 and PERC6/CERC6 RAID Controller Driver for Windows 2000",megasas PERC_32 = "DELL PERC5 and PERC6/CERC6 RAID Controller Driver (Server 2003 32 bit)",percsas [HardwareIds.scsi.MSAS_32] id = "PCI\VEN_1028&DEV_0015&SUBSYS_1F011028", "megasas" id = "PCI\VEN_1028&DEV_0015&SUBSYS_1F021028", "megasas" id = "PCI\VEN_1028&DEV_0015&SUBSYS_1F031028", "megasas" id = "PCI\VEN_1000&DEV_0060&SUBSYS_1F0A1028", "megasas" id = "PCI\VEN_1000&DEV_0060&SUBSYS_1F0B1028", "megasas" id = "PCI\VEN_1000&DEV_0060&SUBSYS_1F0C1028", "megasas" id = "PCI\VEN_1000&DEV_0060&SUBSYS_1F0D1028", "megasas" id = "PCI\VEN_1000&DEV_0060&SUBSYS_1F111028", "megasas" [HardwareIds.scsi.PERC_32] id = "PCI\VEN_1028&DEV_0015&SUBSYS_1F011028", "percsas" id = "PCI\VEN_1028&DEV_0015&SUBSYS_1F021028", "percsas" id = "PCI\VEN_1028&DEV_0015&SUBSYS_1F031028", "percsas" id = "PCI\VEN_1000&DEV_0060&SUBSYS_1F0A1028", "percsas" id = "PCI\VEN_1000&DEV_0060&SUBSYS_1F0B1028", "percsas" id = "PCI\VEN_1000&DEV_0060&SUBSYS_1F0C1028", "percsas" id = "PCI\VEN_1000&DEV_0060&SUBSYS_1F0D1028", "percsas" id = "PCI\VEN_1000&DEV_0060&SUBSYS_1F111028", "percsas" [Files.scsi.MSAS_32] driver = d1, megasas.sys, megasas inf = d1, oemsetup.inf, megasas inf = d1, nodev.inf catalog = d1, percsas.cat [Files.scsi.PERC_32] driver = d2, percsas.sys, percsas inf = d2, oemsetup.inf, percsas inf = d2, nodev.inf catalog = d2, percsas.cat [Config.megasas] value = "", Tag, REG_DWORD, 20 [Config.percsas] value=parameters\PnpInterface,5, REG_DWORD,1 value = "", Tag, REG_DWORD, 20 txtsetup.sif[sourceDisksFiles] bootvid.dll = 1,,,,,,3_,2,0,0,,1,2 percsas.sys = 1,,,,,,4_,4,1,,,1,4 [HardwareIdsDatabase] PCI\VEN_1028&DEV_0015&SUBSYS_1F011028="percsas" PCI\VEN_1028&DEV_0015&SUBSYS_1F021028="percsas" PCI\VEN_1028&DEV_0015&SUBSYS_1F031028="percsas" PCI\VEN_1000&DEV_0060&SUBSYS_1F0A1028="percsas" PCI\VEN_1000&DEV_0060&SUBSYS_1F0B1028="percsas" PCI\VEN_1000&DEV_0060&SUBSYS_1F0C1028="percsas" PCI\VEN_1000&DEV_0060&SUBSYS_1F0D1028="percsas" PCI\VEN_1000&DEV_0060&SUBSYS_1F111028="percsas" [sCSI.Load] percsas = percsas.sys,4 [sCSI] PERC_32 = "DELL PERC5 and PERC6/CERC6 RAID Controller Driver (Server 2003 32 bit)",percsas