Pascal62

I see self in Default only 1 Scsi? Why not also this line? scsi = PERC_32 (for the w2003 section) [Defaults] scsi = MSAS_32

Hello, I have a problem with the unattend Perc5/i driver for windows 2003. First i put the Perc5/i files in TEXTMODE And in Winnt.sif: [MassStorageDrivers] "DELL PERC5 RAID Controller Driver (Server 2003 32-bit)"=OEM [OEMBootFiles] ;Dell 1950 percsas.sys percsas.pdb percsas.cat megasas.sys megasas.pdb txtsetup.oem Oemsetup.inf nodev.inf But this don't work :-( ----- Later i use a different way and a copy the SYS drivers to I386 with makecab And copy in TXTSETUP.sif: [sourceDisksFiles] percsas.sys = 1,,,,,,4_,4,1,,,1,4 [HardwareIdsDatabase] PCI\VEN_1028&DEV_0015&SUBSYS_1F011028 = "percsas" PCI\VEN_1028&DEV_0015&SUBSYS_1F021028 = "percsas" PCI\VEN_1028&DEV_0015&SUBSYS_1F031028 = "percsas" [sCSI.Load] percsas = percsas.sys,4 [sCSI] percsas = "DELL PERC5 RAID Controller Driver (Server 2003 32-bit)" And a copy the drivers to $oem$\$1\drivers1_r\Perc5i OemPnPDriversPath="\drivers1_r\Perc4Di;\drivers1_r\Perc5i But also a get here a BSOD -------- This is the original txtsetup.oem for the Perc5/i -------- [Disks] d1 = "DELL PERC5 RAID Controller Driver for Windows 2000", \megasas.sys, \ d2 = "DELL PERC5 RAID Controller Driver (Server 2003 32-bit)", \percsas.sys, \ [Defaults] scsi = MSAS_32 [scsi] MSAS_32 = "DELL PERC5 RAID Controller Driver for Windows 2000",megasas PERC_32 = "DELL PERC5 RAID Controller Driver (Server 2003 32-bit)",percsas [HardwareIds.scsi.MSAS_32] id = "PCI\VEN_1028&DEV_0015&SUBSYS_1F011028", "megasas" id = "PCI\VEN_1028&DEV_0015&SUBSYS_1F021028", "megasas" id = "PCI\VEN_1028&DEV_0015&SUBSYS_1F031028", "megasas" [HardwareIds.scsi.PERC_32] id = "PCI\VEN_1028&DEV_0015&SUBSYS_1F011028", "percsas" id = "PCI\VEN_1028&DEV_0015&SUBSYS_1F021028", "percsas" id = "PCI\VEN_1028&DEV_0015&SUBSYS_1F031028", "percsas" [Files.scsi.MSAS_32] driver = d1, megasas.sys, megasas inf = d1, oemsetup.inf, megasas inf = d1, nodev.inf catalog = d1, percsas.cat [Files.scsi.PERC_32] driver = d2, percsas.sys, percsas inf = d2, oemsetup.inf, percsas inf = d2, nodev.inf catalog = d2, percsas.cat [Config.megasas] value = "", Tag, REG_DWORD, 20 [Config.percsas] value=parameters\PnpInterface,5, REG_DWORD,1 value = "", Tag, REG_DWORD, 20 ------ We have also a problem with this Dell Perc in BartPE, if we use the LSI driver than we get no error by loading Diskpart only he maken one big partition. Normaly we maken two partitons? Before we have no problems with Perc3 and 4 drivers. Is there something wrong whit the original txtsetup.oem? Thx for reading.