All, I have trying to integrate the drivers for a PERC 5/I into my unattended installation, specifically using the txtsetup.sif and dosnet.inf files. I do not want to use the [MassStorageDrivers] method, because I want to use this installation on many different kinds of hardware. Here are the changes I added to the end of the txtsetup.sif file (without the dashes of course): -------------- [sCSI] PERC_32 = "DELL PERC5 and PERC6/CERC6 RAID Controller Driver (Server 2003 32 bit)",percsas [sCSI.Load] PERC_32 = percsas.sys, 4 [sourceDisksFiles] percsas.sys = 1,,,,,,3_,4,1 [HardwareIDsDatabase] PCI\VEN_1028&DEV_0015&SUBSYS_1F011028 = "PERC_32" PCI\VEN_1028&DEV_0015&SUBSYS_1F021028 = "PERC_32" PCI\VEN_1028&DEV_0015&SUBSYS_1F031028 = "PERC_32" PCI\VEN_1000&DEV_0060&SUBSYS_1F0A1028 = "PERC_32" PCI\VEN_1000&DEV_0060&SUBSYS_1F0B1028 = "PERC_32" PCI\VEN_1000&DEV_0060&SUBSYS_1F0C1028 = "PERC_32" PCI\VEN_1000&DEV_0060&SUBSYS_1F0D1028 = "PERC_32" PCI\VEN_1000&DEV_0060&SUBSYS_1F111028 = "PERC_32" -------------- And to the dosnet.inf: -------------- [Files] d1,percsas.sys [FloppyFiles.2] d1,percsas.sys --------------- Finally I compressed the Percsas.sys file to PERCSAS.SY_ using makecab and copied it to the i386 folder of the installation point. No errors are given, but the machine blue screens after the first text mode reboot. To ensure the driver was good, I ran a clean install, pushed F6 at the proper time and fed the diskette. No problems. I plan to use this automated install on many 2950 servers in the future. If anyone else has encountered and hopefully overcame such an issue, please help. Thanks, Sled