Jump to content

xtrm

Member
  • Posts

    61
  • Joined

  • Last visited

  • Donations

    0.00 USD 
  • Country

    Austria

Posts posted by xtrm

  1. On 1/3/2024 at 5:35 AM, Saxon said:

    That's right. That's what the developer wrote.

    "I will not be spending effort to target discord, chromium or steam."

    https://github.com/vxiiduu/VxKex/issues/79#issuecomment-1564607047

    I think we can now forget about it, officially.

    I would not take this all too serious, several new versions have been released since then and Chromium as well as Discord are listed in the supported/compatible applications list by now. I am hoping that the third one mentioned, Steam, will be soon as well :).

  2. Of course, but as there DO exist some working drivers for the 6-series, you don't need it so badly compared to the 7 and 8 ones. I hope somebody with a newer card can report ASAP here if and how it works.

  3. Why the hell you use these drivers when you have a 6-series geforce? The only reason and sense of this driver is to make 7- and even 8-series work on 9x. So does anybody have in fact a 7- or 8-series that works because of these? That's the interesting part here.

  4. a) I had planned to buy a 250 gig drive and make two 125 GB partitions anyway

    b ) I have the ME version of defrag anyway

    c) I can exchange my scandiskw.exe from 98se to the ME one and it 1.) works and 2.) is better?

    d) I would not have any problems with my scandiskw anyway, not even with the big scan, because all of my partitions would be less than 127 gig?

    Am I right with C and D? If yes...why the hell did nobody tell me this? lol :D

  5. I think you don't get what I mean. I just cannot use this manual override (refresh rate fix) that is built into the driver in the panel. As you should know because of my last postings here, I can of course change refresh rates to what I like them to be. I just cannot tell it that if it for some reason would switch into like 800x600, that it should use 100hz then. I would have to change it in the graphics card tab manually. I don't really care, I don't need it anyway.

  6. I have to say that this refresh rate stuff on all the forceware drivers since...I don't know, the 6x.xx series I believe, does not work with me. It just gives me some error and that's it. And well, my monitors all came with installing CDs and stuff, I have not experienced any problem with that, but I only had samsung screens so far.

  7. I don't think somebody answered my question concerning the Intel Application Accelerator on that topic, so I ask here again - I have a i850E chipset and the 2.3 Application Accelerator installed. Does this (referring the quoter of the post above) mean, that I am in fact able to use bigger harddrives than 127gb just like 2000 and XP can?

  8. I don't understand all your resolution and refresh rate problems. You install the card driver, you install the screen driver, that's it. I can choose all resolutions that are working with my 17" CRT (syncmaster 797mb), up to 2048x1536 and all refresh modes like 60, 70, 72, 75, 85, 100, and if I go down with the resolution (I use 1024x768) I can get 120 or 140 too.
    Be careful to *never* select/use frequencies that were not on the list of your particular monitor (CRT) for a specific resolution.

    If you do, your monitor may just die.

    More info:

    http://www.mdgx.com/newtip23.htm#OVRR

    HTH

    The sense of installing the drivers of your monitor IS to have only the resolutions listed that work with it. I do not need any advice on that =).
  9. I don't understand all your resolution and refresh rate problems. You install the card driver, you install the screen driver, that's it. I can choose all resolutions that are working with my 17" CRT (syncmaster 797mb), up to 2048x1536 and all refresh modes like 60, 70, 72, 75, 85, 100, and if I go down with the resolution (I use 1024x768) I can get 120 or 140 too.

  10. It would be interesting if you can run nvidia's 7-series cards with this driver. I have tried the 81.98 when I got my 6800GT but it was very bad, like a bad beta driver. I went back to an 7x.xx driver that also doesn't work 100% but at least it gives me proper performance.

  11. Disconnect from the internet? I use DSL and I need to login to have ACCESS to the internet! I know people using cable etc. have a different setup...so well, just disconnect the cable from the modem? lol. Or don't use internet sharing if you are in a network.

  12. I have a slight question here. I read this topic and he's talking about the IAA and drives larger than 127 GB. Well I have the IAA 2.3 on my system (intel 850E chipset) and I want to know what I need to run drives over 127 GB properly. I thought about a 250 GB drive and two partitions with 125 each (I know they will be smaller in the end, just to get the idea). I have like 5 120 GB drives and slowly but surely it annoys me.

×
×
  • Create New...