shockaholic

i have a client that has 2 offices in 2 different locations (2 hour drive apart). he is migrating to a new software system for his practice(dental pratcice software) he purchased 2 new dedicated servers. server (1) is running windows server 2003 r2 enterprisewith a domain controller being run on it. this is also the server that will be running the practice database. server (2) is running the same operating system but is set to be used as a terminal server but is not configured. both are in location (a). he needs all of the computers from location (a) & (g) to be able to access the software database which is on server(1). both offices are on dsl connections with static ip gateways. i need help with: setting up server (2) to accept incoming connections from location (g) and once location (g) can access terninal server, be able to log those computers into the domain through server(1). both locations are using manageable linksys routers. i did not originally setup the routers but have access to go in and change settings if need be. location (a) has staic ip address of 71.130.9x.xxx. location (g) has static ip address of 71.130.9x.xxx. i currently have an internal static ip address for server(1) of 192.168.2.10 which is outside the dhcp range of this router of 192.168.2.100-149. i have setup several servers before but have zero experience with setting up a terminal server wand would greatly appreciate any help with this. i would also like some help setting up remote access for all servers and workstations without messing up any other configurations needed. thanks in advance.