WinPE Master Computer Authentication Issue while Installing Configurat

[pannujat]

Hi all,

I was able to get the configuration sets working on RAID set and all was working good.

I suddenly started having issues with whole Winpe setup.

Here is what is happening.

The Master computer boots up fine with the customized winpe CD for Network and Raid drivers. Intel 1000 and Intel SATA ICH7DH RAID. It does all the steps like

Installing Hardware devices

Setting Display Resolution

Partitioning Disks

Starting Networking

When it gets to Installing Configuration set it gives this error

Factory.exe

Cant authenticate to Server: Incorrect function.

I tried different username/password combinations, different network cables, switch. And network ports no luck.

I also booted winpe and see that it gets the DHCP IP and also can see under DHCP leases under DHCP Server.

One thing I can ping from the Master to technician computer but Technician computer cannot ping the IP Master got through DHCP.

Any hints or where should I look into. Any help would be great.

-A

[pannujat]

Hi all,

I was able to get the configuration sets working on RAID set and all was working good.

I suddenly started having issues with whole Winpe setup.

Here is what is happening.

The Master computer boots up fine with the customized winpe CD for Network and Raid drivers. Intel 1000 and Intel SATA ICH7DH RAID. It does all the steps like

Installing Hardware devices

Setting Display Resolution

Partitioning Disks

Starting Networking

When it gets to Installing Configuration set it gives this error

Factory.exe

Cant authenticate to Server: Incorrect function.

I tried different username/password combinations, different network cables, switch. And network ports no luck.

I also booted winpe and see that it gets the DHCP IP and also can see under DHCP leases under DHCP Server.

One thing I can ping from the Master to technician computer but Technician computer cannot ping the IP Master got through DHCP.

Any hints or where should I look into. Any help would be great.

-A

Any one Guys....

[Jazkal]

it might help if clarify what it is your doing.

What WinPE version are you using? What are you trying to do? What do you mean by "Master computer"?

[zorphnog]

If its an authentication issue i would try using the domain in your username (i.e. server=master username=admin would be username=master\admin). I don't know how you are trying to authenticate to whatever server you are trying to connect to, but I have experienced authentication issues when using the "net use" command within PE and the domain name fixed it. That might work, but as Jazkal said, a better explanation of what exactly you are trying to do would help.

[pannujat]

I am trying to install ISA 2006 OEM OPK on one of the machines which I will image and blast on rest.

Here is what I did.

(Technician Computer) Installed Windows XP professional SP2 on one machine and then installed Windows Preinstallation kit on that. I made a configuration set say Model XXX

The made the OPKtools share and gave right permissions RW to user which is adam.

Now I also made a customized Winpe CD with Intel 1000 Nics and booted from that CD on the machine (Master Computer)where I want to install ISA OEM OPK.

Now it goes through this process

Factory is performing the following actions:

Installing hardware devices

Setting display resolution

Partitioning disks and formatting drives

Starting networking

Installing Configuration Set

then it shows below error

Cannot authenticate to server: Incorrect fucntion

below are my winbom.ini

[Version]

signature=$CHICAGO$

[Factory]

Username=adam

Password="jaggajat"

[ComputerSettings]

AuditAdminAutoLogon=Yes

SourcePath=%windir%

[NetCards]

[WinPE]

Restart=Reboot

Lang=ENG

Sku=srv.sp1

ConfigSet=mISA-1300

SourceRoot=\\SJCENGR02\OPKTools

Username=adam

Password="jaggajat"

[WinPE.net]

StartNet=Yes

[DiskConfig]

Disk1=Disk1.config

[Disk1.config]

Size1=*

PartitionType1=primary

FileSystem1=ntfs

QuickFormat1=yes

[startMenuMFUlist]

Link0=

Link1=

Link2=

[OemRunOnce]

unattend.txt

;This is the default Unattended installation file

;Target Path should be new directory

;Adminpassword is blank.

[unattended]

Unattendmode = FullUnattended

OemPreinstall = Yes

TargetPath = *

Filesystem = ConvertNTFS

OemSkipEula = YES

FactoryMode = YES

[userData]

FullName = "Your User Name"

OrgName = "Your Company Name"

ComputerName = *

ProductKey=XXXX-XXXX-XXXX-XXXX-XXXX

[GuiUnattended]

TimeZone = "004"

AdminPassword = *

AutoLogon = Yes

OEMSkipRegional = 1

OEMSkipWelcome = 1

[LicenseFilePrintData]

AutoMode = "PerServer"

AutoUsers = "5"

[Display]

BitsPerPel = 4

XResolution = 800

YResolution = 600

VRefresh = 70

[branding]

BrandIEUsingUnattended = No

IEBrandingFile = install.ins

[Networking]

[identification]

JoinWorkgroup = Workgroup

[Components]

Chat = Off

Charmap = Off

Clipbook = Off

Complusnetwork = On

Hypertrm = Off

Templates = Off

Mousepoint = Off

Iis_asp = On

Iis_common = On

Iis_ftp = Off

Iis_inetmgr = On

Iis_internetdataconnector = Off

Iis_nntp = Off

Iis_serversideincludes = On

Iis_smtp = Off

Iis_webdav = Off

Iis_www = On

[GUIRunOnce]

"cmd /c move c:\cmpnents %WINDIR%"

"cmd /c REG ADD HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\R2Setup /v cd2chain /t REG_DWORD /d 0"

"cmd /c %WINDIR%\cmpnents\r2\setup2.exe /q /a"

"cmd /c shutdown /r /t 5 /d p:4:2"

cfgbatch

General]

Mode=0

Manufacturer=xxxxxx

Model=mISA-1300

[WinPE]

Lang=ENG

Sku=srv.sp1

Arch=x86

[userData]

ProductKey=xxxx-xxxx-xxxx-xxxx-xxxx

[Version]

Signature=$CHICAGO$

Quick_Link_1_Name=Customize Links.url

Quick_Link_1=http://www.microsoft.com/isapi/redir.dll?prd=ie&pver=6&ar=CLinks

Quick_Link_2_Name=Free Hotmail.url

Quick_Link_2=http://www.microsoft.com/isapi/redir.dll?prd=ie&ar=hotmail

Quick_Link_3_Name=Windows.url

Quick_Link_3=http://www.microsoft.com/isapi/redir.dll?prd=ie&ar=windows

Quick_Link_4_Name=Windows Media.url

Quick_Link_4=http://www.microsoft.com/isapi/redir.dll?prd=ie&ar=windowsmedia

Home_Page_Gray=

Search_Page_Gray=

Help_Page_Gray=

[FavoritesEx]

Title1=MSN.com.url

URL1=http://www.microsoft.com/isapi/redir.dll?prd=ie&pver=6&ar=IStart

Title2=Radio Station Guide.url

URL2=http://www.microsoft.com/isapi/redir.dll?prd=windows&sbp=mediaplayer&plcid=&pver=6.1&os=&over=&olcid=&clcid=&ar=Media&sba=RadioBar&o1=&o2=&o3=

[Favorites]

MSN.com.url=http://www.microsoft.com/isapi/redir.dll?prd=ie&pver=6&ar=IStart

Radio Station Guide.url=http://www.microsoft.com/isapi/redir.dll?prd=windows&sbp=mediaplayer&plcid=&pver=6.1&os=&over=&olcid=&clcid=&ar=Media&sba=RadioBar&o1=&o2=&o3=

[startMenuMFUlist]

Link0=

Link1=

Link2=

[OemLink]

OemBrandLinkText=

OemBrandLinkInfotip=

[ConfigSet]

ConfigName=mISA-1300

Finished=1

[support Information]

Line1="Our Technical Support staff is ready to assist you with any installation or operating issues you encounter with your product. "

Line2="if an issue should develop, follow the steps below for the fastest possible service:"

Line3="1.Check the pertinent section of your product manual to see if the issue can be resolved by following the procedures outlined."

Line4="2. Check our web site at http://xxx.com to search the knowledge base or use the on-line service request."

Line5="3. Call your Reseller for assistance."

Line6="4. Call Nappliance Technical Support for assistance at 1-xxx-xxx-xxxx"

Line7=" "

Line8="Visit http://support.xxx.com://http://xxx.com to search the kn...support.xxx.com support for current phone support hours."

[OemRunOnce]

[branding]

OEMName=

[Options]

TimeZoneValue=

DefaultLanguage=

DefaultRegion=

DefaultKeyboard=

INTL_Settings=0

TimeZone=1

MouseTutorial=0

IMETutorial=0