KT7-RAID and unattendXP

[Bigto]

Hi all.

I've a problem to integrate HPT370 RAID drivers with nLite.

I've made a nliteXP Burn and it don't works. The HDD plug on the RAID "output" is not recognized. It's very important because i want to install Windows XP on this HDD and i don't want to use a "FDD and the F6" combo when installing XP.

I want to make a good nLite CD

[30 minutes later after a tour in the forum]

I think the problem it's i havn't integrated the TXTSETUP.OEM file with the drivers.

The problem it's you (helpers) have said to put this file in the same directory of the drivers. But when i read the first line of TXTSETUP.OEM, i can see that :

# TXTSETUP.OEM for HPT3xx UDMA/ATA100 RAID Controller

[Disks]

d1 = "HPT3xx ATA RAID Controller Driver Diskette", \Disk1, \

d2 = "HPT3xx ATA RAID Controller Driver Diskette", \Disk1, \win_nt

d3 = "HPT3xx ATA RAID Controller Driver Diskette", \Disk1, \win_2000

d4 = "HPT3xx ATA RAID Controller Driver Diskette", \Disk1, \win_xp

Also i think the TXTSETUP.OEM will search the drivers in the subfolder "win_xp" and i don't know if i can put all the files (hpt3xx.cat, hpt3xx.inf, hpt3xx.sys, hptpro.sys and TXTSETUP.OEM) in a same folder (Drivers) before integrate or if i can put the file TXTSETUP.OEM in the folder "Drivers" and the other four files in the folder "Drivers\win_xp".

I want to be sure because I don't want to loose other CD's

P.S. : When I integrate, I select the hpt3xx.inf file, not the TXTSETUP.OEM file?

P.S. 2 : It's the first post of a french guy with a poor level of english. Scuse for the mistakes if i've made someones.

Edited August 16, 2005 by Bigto