scp Posted August 20, 2005 Share Posted August 20, 2005 Does it work if you start it manually? If not it may be that we need "legacy network" support in PE.Maybe I have to do a longer test with various combinations. Link to comment Share on other sites More sharing options...
scp Posted August 20, 2005 Share Posted August 20, 2005 (edited) Now I finally found the "bugs":1. DHCP needs time to init, so we must something do to wait for it2. mode=restore instead of mode=load must be used for restoring an image3. If you still have trouble with the packet driver error, try enabling the "Dos 16-bit support for WinPE" pluginHere is the final .cmd file which waits until the server is reachable:@echo offset _ghostserver=myserverset _pingmax=200set _pingcur=0:_trypingIf "%_pingcur%"=="%_pingmax%" goto _errset /A _pingcur=%_pingcur%+1echo.echo %_pingcur% of %_pingmax%...ping %_ghostserver%If errorlevel 1 goto _trypingecho Server found.echo.echo Now starting Ghost...%SystemDrive%\Programs\ghost8\ghost32.exe -clone,mode=restore,src=@MCdeploy,dst=1 -sure -rb -JL:E=%Temp%\ghosterr.log -afile=%Temp%\ghostera.logecho Done.goto _end:_errecho.echo ERROR: Server not found!echo.pause:_endexitJust replace "myserver" at the top of the script with the DNS name or IP address of your GhostCast server and change the ghost32 command in the middle like you need it.PS: my server/dhcp took 94 pings to react, maybe you set a value higher than "200" if it takes longer. Edited August 20, 2005 by scp Link to comment Share on other sites More sharing options...
kilimats Posted August 20, 2005 Author Share Posted August 20, 2005 (edited) ok, thats working now but not completly, let me explainfirst of all i realize that the autorun order wasnt correct, bart pe started first ghost then the network configurator, so i change the name of their .cmd from thatAUTORUN0PENETCFG.CMDAUTORUN9GHOST32.CMDto thatAUTORUN1PENETCFG.CMDAUTORUN2GHOST32.CMDso now everything is working, ghost find the ghostcast server but the ghostcast server say that the connection was reset by the client, and when i check the client i only see the ghost windows but no indicator on it, just blue and grey backgroud Edited August 20, 2005 by kilimats Link to comment Share on other sites More sharing options...
scp Posted August 20, 2005 Share Posted August 20, 2005 Now I have used a totally slimmed down version of BartPE and it worked. Look in ghostpe.txt which plugins I only used.If you use automatic DHCP only you don't need to use penetcfg, just use bartpe.exe with the autorun1startnet.cmd like I created.ghostpe.zip Link to comment Share on other sites More sharing options...
kilimats Posted August 21, 2005 Author Share Posted August 21, 2005 (edited) i tryed to used only your plug-in and autorun file, AUTORUN1STARTNET.CMDAUTORUN2GHOST32.CMDbut still i get this error on the serverconnection reset by clientany idea where this come from ? Edited August 21, 2005 by kilimats Link to comment Share on other sites More sharing options...
kilimats Posted August 21, 2005 Author Share Posted August 21, 2005 updatei just tryed to do it manually, and when i click ok after i enter the session name, the windows freeze and the ghostcast server show the errorso im guessing the autorun is fine, there is something more that make this failim using two vmware OS to do that, maybe thats why ?but i can ping the two OS so thats strange Link to comment Share on other sites More sharing options...
kilimats Posted August 21, 2005 Author Share Posted August 21, 2005 i have another quick questioni would like to insert all nic driver that exist so i will not have to worry for that later, is there a link i can download all that easilyalso i will try to make ultravnc server boot automaticly like ghosti will try ;-)thanks again for your help Link to comment Share on other sites More sharing options...
kilimats Posted August 21, 2005 Author Share Posted August 21, 2005 waaaaaaaaaaaaaaaaaits workinglet me explain, im still confused why its workingso into vmware i got an error, the server crash and client freeze, but the autorun command was good, thx to you ;-)so i then decide to do it in real with my two laptop, i burn the bart pe cd and run the cd on the other laptop, but after the windows waiting logo, i got a blue screen, i did the same thing with my laptop to see if it does the same, same thing happen, i decide to reburn the cd, but again blue screen, the strange thing is that work before under vmwareso i decide to use my old bart pe cd that i know is working, and add on it the autorun that i use, with this cd the boot was working, but i couldnt join the server, even the ping command didnt work, but my ip was in the same range as the server (192.168.0.1, 192.168.0.254), so i then try under vmware the same thing, and it WORK, why, ......, i'm gonna thing about it and post againmy question is, do you know why i got this blue screen with the version i made, is there i plug in i miss??? Link to comment Share on other sites More sharing options...
scp Posted August 21, 2005 Share Posted August 21, 2005 (edited) The network adapters included in windows will be all automatically included by Bart PE. Laptops sometimes have a special need of drivers, so it may be missing.Now I think it would be better you post some data.1.) what Bart PE version you use2.) from what Windows Version you use the Installation CD-ROM3.) what networking card does the Laptops gave4.) which Laptop Manfucturer and Model5.) What does the blue screen contain (0x0000007B or KnownDLLs error or something else)PS: I also forgot to say, that I use InfCacheBuild by Sherpya, which is now included in "Build Scripts". May be it helps you. Edited August 21, 2005 by scp Link to comment Share on other sites More sharing options...
kilimats Posted August 21, 2005 Author Share Posted August 21, 2005 It crash in the same way on two laptop at the same moment after the windows loading logo with a blue screen, i used a japanese computer (Prime d400s) and my IBM thinkpad T41 23731FU1) my bart pe version was v3.1.32) I use an english windows xp with SP23) my thinkpad has a Intel PRO/10/100/10004) answer is above5) the blue screen say *** STOP: 0X0000007B (0Xf7ab5528,0xc0000034,0x00000000,0x00000000)i will give a look now to InfCacheBuild, reply soon Link to comment Share on other sites More sharing options...
kilimats Posted August 21, 2005 Author Share Posted August 21, 2005 didnt understand the use of this InfCacheBuild, sorry Link to comment Share on other sites More sharing options...
hj_fr Posted August 21, 2005 Share Posted August 21, 2005 i see that you speak french, i hope you don't mind if we chat briefly on msn in french (im frencch too) to get this fix, i will then update my post to explain what we didmy MSN adress is kilimats08@hotmail.comhope to see you online<{POST_SNAPBACK}>Good, if it works.Sorry, i don't use MSN. ICQ/Jabber only Link to comment Share on other sites More sharing options...
kilimats Posted August 22, 2005 Author Share Posted August 22, 2005 any idea why i got this blue screen everytime ? Link to comment Share on other sites More sharing options...
kilimats Posted August 23, 2005 Author Share Posted August 23, 2005 scp, did you make any guess for this freeze ? Link to comment Share on other sites More sharing options...
hj_fr Posted August 23, 2005 Share Posted August 23, 2005 I have a T43 IBM laptop with Broadcom GB ethernet controller, no pb with BartPE.Try with another lan, SATA, driver or with no driver. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now