Repair Option from CD

[carlitroz]

Hi guys,

I had created a Unattendended Windows XP SP2 following yours instructions(sorry, my english isn't well).

It works perfect and i have Internet without problems, with dhcp connection and firewall from windows activate. Well,

My winnt.sif file is.....

********************************************************************

;SetupMgrTag

[Data]

AutoPartition=0

MsDosInitiated="0"

UnattendedInstall="Yes"

[unattended]

UnattendMode=FullUnattended

OemSkipEula=Yes

OemPreinstall=No

TargetPath=\WINDOWS

Repartition=NO

FileSystem=*

UnattendSwitch="Yes"

WaitForReboot="NO"

KeyboardLayout="Spanish"

[GuiUnattended]

AdminPassword=*

EncryptedAdminPassword=NO

OEMSkipRegional=1

TimeZone=56

OemSkipWelcome=0

[userData]

ProductID=xxxxx-xxxxx-xxxxx-xxxxx-xxxxx

FullName="User"

OrgName="User"

ComputerName=*

[TapiLocation]

CountryCode=56

Dialing=Tone

AreaCode=02

[RegionalSettings]

LanguageGroup=1

SystemLocale=0000340a

UserLocale=0000340a

InputLocale=340a:0000080a

[identification]

JoinWorkgroup=WorkGroup

[Networking]

InstallDefaultComponents=Yes

[Components]

msmsgs=off

msnexplr=off

[FavoritesEx]

Title1="Google.url"

URL1="http://www.google.cl"

[branding]

BrandIEUsingUnattended=Yes

Home_Page=http://www.google.cl

Search_Page=http://www.google.cl

[Proxy]

Proxy_Enable=0

Use_Same_Proxy=1

********************************************************************

My file is OK, but after i install my Panda Platinium Antivirus v7.05 Spanish, the connection with dhcp Crash.

I don´t know why, but i tried to desactivate the Firewall integrated with windows and Panda Firewall too, but i can´t connect with my router.

In my Other partition, i have a Windows Xp SP1 installation(where i write now), and it work fine.

The problem is that when i boot my unattendended cd, don't appear the Welcome Setup Screen and the Repair Installation from Cd Option.

How can i show this screen, but without loss the rest of the automatized process??

Because in the page you say.... http://unattended.msfn.org/xp/reference.htm OEMSkipWelcome://http://unattended.msfn.org/xp/refer...]OEMSkipWelcome

***************

OemSkipWelcome=0 or 1

This option should be set to 0 if you have OemPreinstall from above on No, If OemPreinstall

is on Yes then this option should be set to 1, not doing so will halt the OEM process! When set to 0 this tells Setup not to display the welcome screen during the GUI-mode of Windows Setup (Note: This is not the same as "Windows Welcome" where you set a username for your new account when Setup finishes)

***************

BUT I won´t do a OEM PReInstall with drivers or something else that a pure Windows Installation...

Well, I hope that you can help me, sorry for my bad english, and Thanks for all.

A Friend From Santiago of Chile, SouthAmerica.

..--CaRLiTrOz--..