Hi All ,

Pls tell me what went wrong with the bootable windows server 2003 Cd That I made , i followed this guide (( http://www.flyakite.msfnhosting.com/introduction.htm )))

and I have made everything according to the guide but didnt boot , and here is a pic in winiso , it says it is not bootable cd ...

Pls tell me what should i do to solve this ,

thax

Yazan

You should use winimage to make the .iso and define the bootsector file in the commandline

e.g.

start cdimage.exe -lDVD-CD Label here -t08/23/2001,09:00:00 -b\AIO-DVD\BOOT\loader.bin -h -n -o -m -yd \AIO-DVD(dir with dvd content) D:\Output file.iso

-b\AIO-DVD\BOOT\loader.bin

thats the bootsector for my dvd

Click here for more info on winimage

hope this helps

don't use WinISO you will run into corruption issues. Set loader.bin as the boot file and rebuild your ISO so it's fresh.

For starters you are going the wrong way really for creating a single OS CD, u can use the multiboot method but u dont have to...All you need to do is take the Files/folders from your /Server2003/Enterprise folder and copy them to something like C:\server2003.

You will then end up with 2003 Enterprise within this folder with folders like i386, tools etc. Then all you need to do is place CDimage and a copy of the 3ENT.dat into c:\ and modify the entery within 3ENT.dat back to i386 then rename it to 3ENT.BIN. Then Run Cmd then the command CD\ to take you to the root of C:\ then run

cdimage.exe -lWIN2003ENTCD -t07/22/2004,09:00:00 -bc:\3ENT.BIN -h -n -o -m c:\Server~1 C:\2003ENT.iso

Dear all, thx for the help..

Ya u are all right I was going in the wrong way .. I used cdimage , and got it done

Thanks to you all

Yazan