P5P43TD/USB3 AHCI

[Zollex]

 P5P43TD/USB3 support AHCI with modified bios but... I can't install AHCI drivers with XP...

No problem with Windows 7...

 

 

But... for Windows xp... If I force the installation does not know which driver put, and which "branch" put ...Help!

Edited April 25, 2015 by Zollex

[cdob]

Try modded Intel driver pack.

http://www.msfn.org/board/topic/107504-integration-of-intels-sata-ahci-and-raid-drivers/

[Zollex]

Where are?

[cdob]

http://www.msfn.org/board/topic/107504-integration-of-intels-sata-ahci-and-raid-drivers/

Post #1 refers to http://www.win-raid.com/t22f23-Guide-Integration-of-Intels-AHCI-RAID-drivers-into-a-Windows-XP-W-k-W-k-CD.html

 

And

Boot Windows 7, open device manager: Which HardwareID matches mass storage controller?

[Zollex]

Right?

Edited April 25, 2015 by Zollex

[cdob]

Right?

Can you make a smaller picture

Seems to be a "Intel® ICH10R SATA AHCI Controller"

Supported by 32bit Intel RST textmode driver v11.2.0.1006 WHQL

[Zollex]

This drivers?

ICH10R SATA Drivers 8.9.0.1023 ?

And why for Windows 7 are Intel_Chipset_V9111019_XPVistaWin7?

Windows 7 only ICH10 without R ?

Edited April 25, 2015 by Zollex

[cdob]

Yes, the driver should work too. Try it. 

Post the HardwareID as text, not as a tiny picture.

 

Intel Chipset is another case: there are no AHCI/RAID mass storage drivers.

 

Asks Intel about naming convention.

[Zollex]

Windows 7

 

PCI\VEN_8086&DEV_3A22&SUBSYS_82D41043&REV_00

PCI\VEN_8086&DEV_3A22&SUBSYS_82D41043

PCI\VEN_8086&DEV_3A22&CC_010601

PCI\VEN_8086&DEV_3A22&CC_0106

Edited April 25, 2015 by Zollex

[Zollex]

OK... works ICH10R with XP... but what strange difference!!! Only ONE controller standard PCI IDE? Why are two on Windows 7?

Edited April 25, 2015 by Zollex