Jump to content

Slipstreaming raid drivers Server 2003

TRCJudge
 Share

Recommended Posts

TRCJudge

TRCJudge

Posted
Posted

Hi All.

Tearing my hair out here. I have a server with no floppy provision and am trying to slipstream. I have followed various instructions on slipstreaming even using n-lite but nothing works. The furthest I have got is loading the drives, rebooting then an error message saying that setup cannot continue as the files are corrupt (phase0).

Is there a simple definitive guide for this? I have followed Microsoft articles, several of the posts here including what is posted below. I get various levels of success from not finding the drivers to the reboot and setup failure. My board is an Intel system and I have the drivers from CD. Can anyone help, I have gone through about 20 DVD-R's so far!!

I don't have an Adaptec 2010S but I have sucessfully integrated several other SCSI drivers into my Windows 2003 install with no problems. Taking the OEM file that you provided here is what I would do to make it work on my systems...

1) Add the following to DOSNET.INF

[Files]

d1,dpti2o.sys

2) Add the following to TXTSETUP.SIF

[sourceDisksFiles]

dpti2o.sys = 1,,,,,,4_,4,1,,,1,4

[HardwareIdsDatabase]

; Adaptec I2O RAID Adapters

PCI\VEN_1044&DEV_A501&SUBSYS_C0011044 = "dpti2o"

PCI\VEN_1044&DEV_A501&SUBSYS_C0021044 = "dpti2o"

PCI\VEN_1044&DEV_A501&SUBSYS_C0031044 = "dpti2o"

PCI\VEN_1044&DEV_A501&SUBSYS_C0041044 = "dpti2o"

PCI\VEN_1044&DEV_A501&SUBSYS_C0051044 = "dpti2o"

PCI\VEN_1044&DEV_A501&SUBSYS_C00A1044 = "dpti2o"

PCI\VEN_1044&DEV_A501&SUBSYS_C00B1044 = "dpti2o"

PCI\VEN_1044&DEV_A501&SUBSYS_C00C1044 = "dpti2o"

PCI\VEN_1044&DEV_A501&SUBSYS_C00D1044 = "dpti2o"

PCI\VEN_1044&DEV_A501&SUBSYS_C00E1044 = "dpti2o"

PCI\VEN_1044&DEV_A501&SUBSYS_C00F1044 = "dpti2o"

PCI\VEN_1044&DEV_A501&SUBSYS_C0141044 = "dpti2o"

PCI\VEN_1044&DEV_A501&SUBSYS_C0151044 = "dpti2o"

PCI\VEN_1044&DEV_A501&SUBSYS_C0161044 = "dpti2o"

PCI\VEN_1044&DEV_A501&SUBSYS_C01E1044 = "dpti2o"

PCI\VEN_1044&DEV_A501&SUBSYS_C01F1044 = "dpti2o"

PCI\VEN_1044&DEV_A501&SUBSYS_C0201044 = "dpti2o"

PCI\VEN_1044&DEV_A501&SUBSYS_C0211044 = "dpti2o"

PCI\VEN_1044&DEV_A501&SUBSYS_C0281044 = "dpti2o"

PCI\VEN_1044&DEV_A501&SUBSYS_C0291044 = "dpti2o"

PCI\VEN_1044&DEV_A501&SUBSYS_C02A1044 = "dpti2o"

PCI\VEN_1044&DEV_A501&SUBSYS_C03C1044 = "dpti2o"

PCI\VEN_1044&DEV_A501&SUBSYS_C03D1044 = "dpti2o"

PCI\VEN_1044&DEV_A501&SUBSYS_C03E1044 = "dpti2o"

PCI\VEN_1044&DEV_A501&SUBSYS_C0461044 = "dpti2o"

PCI\VEN_1044&DEV_A501&SUBSYS_C0471044 = "dpti2o"

PCI\VEN_1044&DEV_A501&SUBSYS_C0481044 = "dpti2o"

PCI\VEN_1044&DEV_A501&SUBSYS_C0501044 = "dpti2o"

PCI\VEN_1044&DEV_A501&SUBSYS_C0511044 = "dpti2o"

PCI\VEN_1044&DEV_A501&SUBSYS_C0521044 = "dpti2o"

PCI\VEN_1044&DEV_A501&SUBSYS_C05A1044 = "dpti2o"

PCI\VEN_1044&DEV_A501&SUBSYS_C05B1044 = "dpti2o"

PCI\VEN_1044&DEV_A511&SUBSYS_C05F1044 = "dpti2o"

PCI\VEN_1044&DEV_A501&SUBSYS_C0641044 = "dpti2o"

PCI\VEN_1044&DEV_A501&SUBSYS_C0651044 = "dpti2o"

PCI\VEN_1044&DEV_A501&SUBSYS_C0661044 = "dpti2o"

PCI\VEN_1044&DEV_A511&SUBSYS_C0321044 = "dpti2o"

PCI\VEN_1044&DEV_A511&SUBSYS_C0331044 = "dpti2o"

PCI\VEN_1044&DEV_A511&SUBSYS_C0661044 = "dpti2o"

PCI\VEN_1044&DEV_A511&SUBSYS_C0341044 = "dpti2o"

PCI\VEN_1044&DEV_A511&SUBSYS_C0351044 = "dpti2o"

[sCSI.Load]

dpti2o = dpti2o.sys,4

[sCSI]

dpti2o = "Adaptec I2O RAID Adapters"

3) Add the following to HIVESYS.INF

[AddReg]

; Adaptec I2O RAID Adapters

HKLM,"SYSTEM\CurrentControlSet\Services\dpti2o","ErrorControl",0x00010003,1

HKLM,"SYSTEM\CurrentControlSet\Services\dpti2o","Group",0x00000002,"SCSI miniport"

HKLM,"SYSTEM\CurrentControlSet\Services\dpti2o","Start",0x00010003,4

HKLM,"SYSTEM\CurrentControlSet\Services\dpti2o","Type",0x00010003,1

HKLM,"SYSTEM\CurrentControlSet\Services\dpti2o\Parameters",,0x00000012

HKLM,"SYSTEM\CurrentControlSet\Services\dpti2o\Parameters\Device","NumberOfRequests",0x00010001,0x40

; Adaptec I2O RAID Adapters

HKLM,"SYSTEM\CurrentControlSet\Services\EventLog\System\dpti2o","EventMessageFile",0x00020002,"%SystemRoot%\System32\IoLogMsg.dll"

HKLM,"SYSTEM\CurrentControlSet\Services\EventLog\System\dpti2o","TypesSupported",0x00010003,7

Be extremely careful to ensure that you don't change the wrapping of lines in HIVESYS.INF, I found that if I opened HIVESYS.INF in Notepad with word wrap on, that it would sometimes change the line wrapping upon saving, effectivly corrupting the file. So turn word wrap off! Or better yet use a better text editor like UltraEdit.

4) Create the following CD structure

+---$OEM$

| +---$1

| \---Drivers

| +---SCSI

| \---dpti2o

\---I386

+---SVCPACK

+---SYSTEM32

\---UNIPROC

Place all the Adaptec driver files in \$OEM$\$1\Drivers\SCSI\dpti2o

Copy dpti2o.sys to \i386

Copy dpti2o.cat to \i386\SVCPACK

5) Add the following to WINNT.SIF

[unattended]

OemPreinstall=Yes

OemFilesPath="..\$OEM$"

; See http://support.microsoft.com/default.aspx?scid=kb;EN-US;q250380 for why this must be = Ignore

DriverSigningPolicy=Ignore

OemPnPDriversPath="Drivers\SCSI\dpti2o;"

Beware that lines posted here may possibly wrap! If you paste wrapped lines into your INF or SIF files they will NOT work.

Link to comment
Share on other sites

tomasz86

tomasz86

Posted
Posted

You may want to consider a HDD or USB based installation. It will save you a lot of time and money.

Technically you should only need this:

  1. DOSNET.INF
    [Files]
    d1,dpti2o.sys


  2. TXTSETUP.SIF
    [SourceDisksFiles]
    dpti2o.sys = 1,,,,,,4_,4,1,,,1,4

    [HardwareIdsDatabase]
    ; Adaptec I2O RAID Adapters
    PCI\VEN_1044&DEV_A501&SUBSYS_C0011044 = "dpti2o"
    PCI\VEN_1044&DEV_A501&SUBSYS_C0021044 = "dpti2o"
    PCI\VEN_1044&DEV_A501&SUBSYS_C0031044 = "dpti2o"
    PCI\VEN_1044&DEV_A501&SUBSYS_C0041044 = "dpti2o"
    PCI\VEN_1044&DEV_A501&SUBSYS_C0051044 = "dpti2o"
    PCI\VEN_1044&DEV_A501&SUBSYS_C00A1044 = "dpti2o"
    PCI\VEN_1044&DEV_A501&SUBSYS_C00B1044 = "dpti2o"
    PCI\VEN_1044&DEV_A501&SUBSYS_C00C1044 = "dpti2o"
    PCI\VEN_1044&DEV_A501&SUBSYS_C00D1044 = "dpti2o"
    PCI\VEN_1044&DEV_A501&SUBSYS_C00E1044 = "dpti2o"
    PCI\VEN_1044&DEV_A501&SUBSYS_C00F1044 = "dpti2o"
    PCI\VEN_1044&DEV_A501&SUBSYS_C0141044 = "dpti2o"
    PCI\VEN_1044&DEV_A501&SUBSYS_C0151044 = "dpti2o"
    PCI\VEN_1044&DEV_A501&SUBSYS_C0161044 = "dpti2o"
    PCI\VEN_1044&DEV_A501&SUBSYS_C01E1044 = "dpti2o"
    PCI\VEN_1044&DEV_A501&SUBSYS_C01F1044 = "dpti2o"
    PCI\VEN_1044&DEV_A501&SUBSYS_C0201044 = "dpti2o"
    PCI\VEN_1044&DEV_A501&SUBSYS_C0211044 = "dpti2o"
    PCI\VEN_1044&DEV_A501&SUBSYS_C0281044 = "dpti2o"
    PCI\VEN_1044&DEV_A501&SUBSYS_C0291044 = "dpti2o"
    PCI\VEN_1044&DEV_A501&SUBSYS_C02A1044 = "dpti2o"
    PCI\VEN_1044&DEV_A501&SUBSYS_C03C1044 = "dpti2o"
    PCI\VEN_1044&DEV_A501&SUBSYS_C03D1044 = "dpti2o"
    PCI\VEN_1044&DEV_A501&SUBSYS_C03E1044 = "dpti2o"
    PCI\VEN_1044&DEV_A501&SUBSYS_C0461044 = "dpti2o"
    PCI\VEN_1044&DEV_A501&SUBSYS_C0471044 = "dpti2o"
    PCI\VEN_1044&DEV_A501&SUBSYS_C0481044 = "dpti2o"
    PCI\VEN_1044&DEV_A501&SUBSYS_C0501044 = "dpti2o"
    PCI\VEN_1044&DEV_A501&SUBSYS_C0511044 = "dpti2o"
    PCI\VEN_1044&DEV_A501&SUBSYS_C0521044 = "dpti2o"
    PCI\VEN_1044&DEV_A501&SUBSYS_C05A1044 = "dpti2o"
    PCI\VEN_1044&DEV_A501&SUBSYS_C05B1044 = "dpti2o"
    PCI\VEN_1044&DEV_A511&SUBSYS_C05F1044 = "dpti2o"
    PCI\VEN_1044&DEV_A501&SUBSYS_C0641044 = "dpti2o"
    PCI\VEN_1044&DEV_A501&SUBSYS_C0651044 = "dpti2o"
    PCI\VEN_1044&DEV_A501&SUBSYS_C0661044 = "dpti2o"
    PCI\VEN_1044&DEV_A511&SUBSYS_C0321044 = "dpti2o"
    PCI\VEN_1044&DEV_A511&SUBSYS_C0331044 = "dpti2o"
    PCI\VEN_1044&DEV_A511&SUBSYS_C0661044 = "dpti2o"
    PCI\VEN_1044&DEV_A511&SUBSYS_C0341044 = "dpti2o"
    PCI\VEN_1044&DEV_A511&SUBSYS_C0351044 = "dpti2o"

    [SCSI.Load]
    dpti2o = dpti2o.sys,4

    [SCSI]
    dpti2o = "Adaptec I2O RAID Adapters"

    [FileFlags]
    dpti2o.sys = 16


  3. HIVESYS.INF
    [AddReg]
    ; Adaptec I2O RAID Adapters
    HKLM,"SYSTEM\CurrentControlSet\Services\dpti2o\Parameters",,0x00000012
    HKLM,"SYSTEM\CurrentControlSet\Services\dpti2o\Parameters\PnpInterface","5",0x00010003,1


Just copy "dpti2o.sys" to I386 (no need to use $OEM$).

Link to comment
Share on other sites
TRCJudge

TRCJudge

Posted
  • Author
Posted

Nope. It gets me quite far. Drives are recognised, loads setup files, reboots and gives the windows 2003 slash screen. But then gives a blank screen and does not conclude the setup.

Whats the USB install like, not tried that before?

Link to comment
Share on other sites
tomasz86

tomasz86

Posted
Posted

If the drives are detected then it means that the driver itself has been integrated properly and does work. Are you sure that the hardware is 100% fine? It would be useful if you checked the installation with a different controller.

Link to comment
Share on other sites
allen2

allen2

Posted
Posted

I had this problem when i didn't add the driver .inf in txtsetup.sif in the [sourceDisksFiles] section after editing the inf to point in the files in the right folder:

For example \amd64 for x64 OS or \i386 for x86.

[SourceDisksNames]
1 = %DiskName%,,,\amd64

Other than that i use the method explained by tomasz86 and it is always working fine (i did it many times).

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...