MSFN is made available via donations, subscriptions and advertising revenue. The use of ad-blocking software hurts the site. Please disable ad-blocking software or set an exception for MSFN. ×
Search the Community
Showing results for tags 'Slot 1'.
The Mission: Build a Windows 98 gaming machine using original boxed and sealed hardware. Everything below is NEW unless specified otherwise. The Build: OS: Windows 98SE Case/PSU: GAUSS SM307M (250w PSU included) Mobo: Intel SE440BX-2 Processor: Slot 1 Pentium III @ 733MHz with 133MHz Bus RAM: PNY 256MB PC100/133 (4 sticks available) Video Card: ATI Rage 128PRO 32MB (PCI) Sound Card: SoundBlaster 16 PCI (CT4810) HDD: Maxtor 15GB 7200RPM (51536H3) Optical: Creative Blaster 52x (MK4108) Monitor: Sony Trinitron CRT (used) KB/Mouse: Generic Microsoft Speakers: IBM (used) Where I'm at: The system has been built. PSU, CPU and intake fans all start. During the POST process I receive an error beep code: 1-4-3-3. According to this site the code description is: "Autosize the Cache". I have attempted to move the jumper plug from it's "normal" position to the "configure" position in hopes to set the Processor speed ect. However, this results in the same error beep code. I should also note at this point that my monitor receives no signal from the ATI Rage card. I am assuming that since the POST can't pass, no signal is even being sent from my video card technically. And hitting the num/caps/scroll lock keys don't light up, another sign that I am not passing POST. I have 2 VGA compatible monitors, both were tested with my laptop and work. I have tried various DIMM combinations too. A bit of Bro Science: If you look up the Intel manual for the SE440BX-2 (here) you will come across all sorts of information that would contradict my build due to apparent compatibility issues. Examples of this would be the small DIMM sizes and the slower Processor speeds listed as supported/compatible by Intel. However, after some digging into really old forums from around the Y2K era it became apparent to me that people were throwing in non-coppermine processors far exceeding 450MHz (up to the fastest Pentium III's) as well as using DIMM's that were double the size than what was officially listed as Intel as supported/compatible - and they worked. Technology was moving so insanely fast during this era that at the time Intel listed the supported DIMM size and Processor speeds ect, it would have been outdated by the time the motherboards started shipping! And the support list would have definitely been outdated a year later! I wanted to include this tid-bit just in case someone googles my motherboard, checks the specs or even reads the manual and sees that my Pentium III speed or DIMM size exceeds the manufactures supported hardware list. I found different numbers on different sites actually which was quite confusing. All that said, perhaps my issue is the 133MHz bus speed of my Pentium III. Maybe I need 100MHz bus speed, regardless of the main clock speed. Maybe I screwed up on that one... The only other thread I could find in regards to my issue is found here. Though I have built systems in recent years, a retro project has required some deep digging indeed... Just because I grew up gaming in the 90's doesn't mean I learned anything about computer hardware from that era Thank you for taking any time to help me on my Windows 98 quest.