asi

hi i have an excel file that when i open it for print priview(excel 2003) and start rolling down, as soon as it reaches page 3 it(excel) crashes with an error. if i send it straight to to printer (without priview) it will print up to page 2 and then crashes. i rechecked page 3 and i can't see any problem. In addition to that i have few more files that have the same symptomes even when i just scrool down the sheet, even befor i send it to print preview. i tried it on a diffrent p.c and it's the same. i reformated the p.c and reinstall every thing but still the same. on excel 2002 it works great. microsoft says the worksheet is bad and i need to make a new one so i open a new excel sheet, wrote every thing again and still i get the same error. i changed the printer driver but no success there. the error i get is: error signatures app name: excel.exe app AppvVer 11.0.6560.0 AppStamp:4296b6f2 ModName :mso.dll ModVer 11.0.6568.0 ModStamp :42e18ef6 fDebug:0 Offset:0083bae6 i'm prity desperate about this and this sheet is very importent. Thanx Asi

hi. the server is connected to port 1 on the router. other lan workstations r working great. thanx

Hi I have a small network with win 2003 server and 2 stations. All connected with a wireless LINKSYS WRT54G router.(the stations r connected d by LAN) I disabled the dhcp service on the router so now the server is providing ip address to the stations. I have a laptop which is trying to connect to the wireless router but no success ( i get the 169 ip). i thought that because i disabled the dhcp on the router it will not give my a wireless ip but I've been told that the router is getting the ip from the server and providing it to the wireless network so i'm supposed to get an ip from the router that comes from the server but i guess it's not working. so is it true? and if not what should i do? and if it is true then what's wrong? why is it not working? thanx ASI

problem has been solved: the floppy drive(not the disk) was bad. i changed it to a diffrent one now every thing works. thanx any way

hi. i'm trying to install win 2003 sbs on a pc server. It's P4 3.0 Ghz with Intel D945GNT MB. 1 Giga byte of ram 2 wd 80 gigs sata hard drive with raid connected. i went inside the raid bios and defind one of the hard drives has a raid driver. i started the installation pushing f6 for raid. then i was asked to put in the floppy i recived with my mb. i choose the chipset type: Intel® 82801GR I/O Controller Hub (ICH7-R) the i wait and after a while i'm getting the following error: File iaStor.sys caused an unexpected error (513) at line 2187 in d:\srvrtm\base\boot\setup\oemdisk.c. some times the lone number is diffrent. i'v tried already to download several versions of raid driver from "intels" site but still same error. does any one knows what to do. i'v been trying to work it out for a few days now but i'm despert. Thanx asi