I'm back! Though I guess that's a bad thing I got help a few months ago on this thread and everything was going great. I did a few hardware upgrades recently though, which included switching out some HDD's and I am back to having problems with NF4 driver integration. Here is the hardware I am using: ASUS A8N-SLI Deluxe A64 3500+ Venice 2gb (2x 1gb) OCZ DDR 3200 2 eVGA 7800GT's 2x 74gb WD Raptors One of the raptors is new, the other isa year old or so. Both have been working fine for me though. I have the latest BIOS update for the motherboard, which adds the 4.84 nvraid. The drivers I am slip streaming are from the nForce 4 AMD 32bit set, verison 6.70. So anyway. After creating a stripped array of the raptors, I load up the windows installer. Windows sees them as one big drive and everything seems normal. I create a 50gb partition, format, and load setup files. Then, on the first reboot, all I get is a blank black screen. The CDROM spins up, but it stops there. It never gets to the actual install and configure portion of the setup. Any ideas what the problem could be? I think it may be hardware related because I am using an older slipstream that I had working with 2 other raptors. I looked through the BIOS, making sure all my boot priorities are correct and nothing else seems to be conflicting with previous setups. I have also tried using a new slipstream that was made with the same 6.70 and nLite 1.0 rc6. Still getting the same blank screen though. Thanks for any help!