Jump to content

RAZ Dad

Member
  • Posts

    39
  • Joined

  • Last visited

  • Donations

    0.00 USD 
  • Country

    United Kingdom

Everything posted by RAZ Dad

  1. Hi every body I am trying to install windows 98SE in a old computer but unfortunatly when the system restart it recongnise the CD in in drive and attempt to boot from CD but cant't and the message display "the disk is not bootable" but the disk is bootable it work and boot perfect in other computer. CD Drive is first in boot list in setup. is there any other way to install windows 98SE in this hard drive. Thanks for your help
  2. Thank you very much it worked perfect. another question how can I add EXIT Command to restart the computer. thanks
  3. Thnaks for your for your help. I added your command at the end of my Autoexec.bat but result is as following A:\>..... Bad Command or File name A:\>..... Bad Command or File name A:\>..... Bad Command or File name A:\>echo The image is succesfully restored! The image is succesfully restored! ( 2 times repeat the message) A:\>pause Press any key to continue Thanks to see where is the problem
  4. Hi Dear Every time if a user bring a computer and say I want 3 partition I have to do it manually every time. Do you know any software or ways to Automate the partitioning of the hard before installing windows. Thanks
  5. Hi Dear I have used Drive Snapshot to creat an image of my system, I have Automated the restore by use AutocEXE.bat file, as soon as you restart the computer the disk inside the drive it automaticaly start restoring the system in DOS. but after restore it do not display any message in DOS to tell the user it has successfully has resdtored the computer. Can you please help me, which type of file I have to add in my disk to be excuted by AutocEXE.bat in order to display a message after restore. thanks for your help
  6. Thank you very much every body for your usfull ideas I will use Snapshot, it seems very sipmle and fast to creat image.
  7. Hi every body As you know when you buy the computer from dealers they have special software installed in system to creat Recovery CD/DVD in case of system carsh you will use it to recover your system. Is there any share or free ware or Tutorial that I creat a recovery CD for my Sytem. thanks for your help
  8. Hi every body To day I wanted to fix a computer with EIDE Drive unfortunatly when I boot from ERD Commander 2005, it can not see the any partition of the Hard Disk, for Windows files. I have itegrated the driver for SATA, it work perfect with my computer who got SATA Hard drive. but not with EIDE, dos this hard drive need any driver thaks for your help
  9. Thank you very much I try it
  10. Dear Bas Thank for your usefull information I see your Menu you have biult it is very nice I wanted to built same style all I am stuck is the colores. I do not know how to make 2 or more color in my menue, for example in your menu the area " Welcome to Ultra Boot DVD" and "Exit Button" how do you add these to pieces of dark blue at buttom and top of menu then for your help
  11. Thank you very much I will follow to see what will happen.
  12. TO BAS THANK YOU VERY MUCH COULD MAKE IT LATER IT WORKING PERFECT THANK YOU VERY MUCH FOR YOUR HELP.
  13. THIS IS MY DVD FOLDER IN MY HARD DRIVE I:\My DVD Project\AIO-DVD\SETUP\XP\Professional\SETUP.EXE THIS MY ACTION BUTTON XP PROFESSIONAL RUN result = File.Run("\\SETUP_3.EXE", "", "", SW_SHOWNORMAL, false); AFTER PUBLISHING I COPIED THAT TO I:\My DVD Project\AIO-DVD WHEN I CLICK ON BUTTON NOTHING HAPPEN. WHAT CATAGORY DO YOU SELECT TO RUN EXE FILES. THANKS
  14. Thanks Can you please write me a Tutorial from the point you pucblish the Menue in a foleder how you add your Windows installations to Menue and Burn them in CD. thanks
  15. thanks for reply But My Multi DVD Folders and files are in a folder in hard drive. After building, I add Action to button to run EXE files for Programes, then I Publish my Menu to a folder, when I see the published folder there are only Auto run files and only one EXE program which I assigned in Action button, what about the rest of the folders located in my DVD folder. thanks
  16. Hi every body I have a number of computers at home and I have server 2003 standard,WEB, Enterprise Editons. I would like to creat a net work and one of the computer as server. I have already installed the server 2003 standard but I do not know how to configure it to serve the others. I was trying to find a step by step guide but I could not. Any tutorial or guide you know thanks
  17. hi every body. How can I creat an office Unattended instalation. any Tutorial? thanks
  18. I have Autoplay media studio but I do ever thing but I do not know where to copy my Multi DVD Folders and file to be accessed by Auto menue. Can any body please give me a step by step instruction how to it. thanks
  19. Thank you very much for both of you I did stream it it works perfect.
  20. Sorry I am confused how what to place under which appropriate category This my TXTSETUP.ome entries ; Copyright © 2002-2003 by Silicon Image, Inc. ; All rights reserved [Disks] disk1 = "Silicon Image SiI 3x12 SATALink Driver Installation Disk",\si3112.sys,\ [Defaults] SCSI = Si3112_XP [sCSI] ; HwComponent section Si3112_XP = "Silicon Image SiI 3x12 SATALink Controller for Windows XP/Server 2003" Si3112_NT = "Silicon Image SiI 3x12 SATALink Controller for Windows NT 4.0 and 2000" [Files.SCSI.Si3112_XP] driver = disk1,si3112.sys, Si3112 driver = disk1,SiWinAcc.sys, SiFilter inf = disk1,SI3112.inf dll = disk1,SilSupp.cpl catalog = disk1, Si3112.cat [Files.SCSI.Si3112_NT] driver = disk1,si3112.sys, Si3112 inf = disk1,SI3112.inf dll = disk1,SilSupp.cpl catalog = disk1, Si3112.cat [HardwareIds.SCSI.Si3112_XP] id = "PCI\VEN_1095&DEV_3112&SUBSYS_31121095", "Si3112" id = "PCI\VEN_1095&DEV_3112&SUBSYS_34238086", "Si3112" id = "PCI\VEN_1095&DEV_3112&SUBSYS_311215D9", "Si3112" id = "PCI\VEN_1095&DEV_3112&SUBSYS_B0021458", "Si3112" id = "PCI\VEN_1095&DEV_3112&SUBSYS_01661028", "Si3112" id = "PCI\VEN_1095&DEV_3112&SUBSYS_82141033", "Si3112" id = "PCI\VEN_1095&DEV_3512&SUBSYS_35121095", "Si3112" id = "PCI\VEN_1095&DEV_3512&SUBSYS_01661028", "Si3112" [HardwareIds.SCSI.Si3112_NT] id = "PCI\VEN_1095&DEV_3112&SUBSYS_31121095", "Si3112" id = "PCI\VEN_1095&DEV_3112&SUBSYS_34238086", "Si3112" id = "PCI\VEN_1095&DEV_3112&SUBSYS_311215D9", "Si3112" id = "PCI\VEN_1095&DEV_3112&SUBSYS_B0021458", "Si3112" id = "PCI\VEN_1095&DEV_3112&SUBSYS_01661028", "Si3112" id = "PCI\VEN_1095&DEV_3112&SUBSYS_82141033", "Si3112" id = "PCI\VEN_1095&DEV_3512&SUBSYS_35121095", "Si3112" id = "PCI\VEN_1095&DEV_3512&SUBSYS_01661028", "Si3112" [Config.Si3112] value = ProblemDevices, "", REG_SZ, "" value = ProblemDevices, "Maxtor 4D060H3 DAK05GK0", REG_SZ, "MaxMode = UDMA-5" value = ProblemDevices, "ST320012AS", REG_SZ, "Mod15Write" value = ProblemDevices, "ST330013AS", REG_SZ, "Mod15Write" value = ProblemDevices, "ST340017AS", REG_SZ, "Mod15Write" value = ProblemDevices, "ST360015AS", REG_SZ, "Mod15Write" value = ProblemDevices, "ST380023AS", REG_SZ, "Mod15Write" value = ProblemDevices, "ST3120023AS", REG_SZ, "Mod15Write" value = ProblemDevices, "ST340014ASL", REG_SZ, "Mod15Write" value = ProblemDevices, "ST360014ASL", REG_SZ, "Mod15Write" value = ProblemDevices, "ST380011ASL", REG_SZ, "Mod15Write" value = ProblemDevices, "ST3120022ASL", REG_SZ, "Mod15Write" value = ProblemDevices, "ST3160021ASL", REG_SZ, "Mod15Write"
  21. Sorry I forgot to write you before following is the files in SATA driver package for XP which is should be placed in which folder of ERD Commander 2005: SI3112.CAT SI3112.INF SI3112.MPD SI3112.SYS SIISUPP.VXD SILSUPP.CPL SIWINACC.SYS TXTSETUP.OEM
  22. thanks for your help I could not find any specific Driver for my HDD from manufacturer but I have for XP, 2003, xp x64, do any of these work for ERD 2005. 2.the txtsetup.sif file is very long file in which part of this file I have to add the entry of txtsetup.oem. ( I have attached the txtsetup.sif for you to show me). 3. Should I add all the contans of my Driver package to (system32 folder) of ERD Commander. thanks alot
  23. Hi every body I have added ERD Commander 2005 in Multi Boot DVD but unfortunatly after boot and going to GUI I can not see my Hard drive in explorer I understand becuase I have Serial ATA drive in my computer normally I have to add it when I install windows, but what about ERD Commander 2005 how can I add my Serial ATA Drive drivers in order to be recongnised. Thanks for your help
  24. Hi every body I have 3 Pc in one of them I have server 2003 Standard Edtion, they are connected to a home net work, but unfotunatly time to time when some thing happen to one of the cliend I have to do everting like installting window phisically. I want to know haw can I do a remote installation of windows to one of my Client Station by my server. 1st: I know I should have Net work card or BIOS complient with PXE but when I go to BIOS set up I do not see any option in Boot list PXE to boot from network. and I do not how to check if NIC support PXE. 2nd: how can I configur my Server to allow the client to do remote installation, I read in some of the article that I have to creat an image(How I can do this ??) Thanks for your help and support
  25. Hi every body I wa slooking around the forum if I find any this about Auto run menue for DVD I could not. What I am trying to know , when we are in an active windows and insert the multi DVD disk in drive there should be an auto run menue to access the windows setup. Has any body done it before please help me how to do it thanks every body
×
×
  • Create New...