[RASOR - Textmode Driver Utility]

I used RASOR for integrating the NVIDIA raid drivers

on the setup I get an error message "missing entry "IDE CD-ROM (ATAPI 1.2)/PCI IDE Controller" in section [scsi] of txtsetup.sif

how can I fix this problem - what do I have to add?

*edit*

sry - the entries were different (in txtsetup it was called "IDE CD-ROM (ATAPI 1.2)/PCI IDE-Controller"

this may be caused by the localization of windows

now i have the same problem as plzlisn

[Successful NVRAID unattended slipstream]

thx 4 those tutorials

i did all the steps you described but it seems that it doesn't work

first i set up the raid bios

then i made my unattended win-cd - the textmode setup seems to load the drivers (no errors), but when it asks for choosing a partition to install i don't see a raid-array but the 2 hdds the raid is made of

my config-files:

txtsetup.sif

[SourceDisksFiles]
nvatabus.sys          = 1,,,,,,4_,4,1,,,1,4
nvraid.sys            = 1,,,,,,4_,4,1,,,1,4

[HardwareIdsDatabase]
PCI\VEN_10DE&DEV_008E, "nvatabus"
PCI\VEN_10DE&DEV_0085, "nvatabus"
PCI\VEN_10DE&DEV_00D5, "nvatabus"
PCI\VEN_10DE&DEV_00EE, "nvatabus"
PCI\VEN_10DE&DEV_00E3, "nvatabus"
PCI\VEN_10DE&DEV_00E5, "nvatabus"
PCI\VEN_10DE&DEV_0035, "nvatabus"
PCI\VEN_10DE&DEV_0036, "nvatabus"
PCI\VEN_10DE&DEV_003E, "nvatabus"
PCI\VEN_10DE&DEV_0053, "nvatabus"
PCI\VEN_10DE&DEV_0054, "nvatabus"
PCI\VEN_10DE&DEV_0055, "nvatabus"
*_NVRAIDBUS           = "nvraid"
GenNvRaidDisk         = "nvraid"

[SCSI.load]
nvatabus              = nvatabus.sys,4
nvraid                = nvraid.sys,4

[SCSI]
nvatabus              = "NVIDIA NForce Storage Controller"
nvraid                = "NVIDIA RAID CLASS DRIVER"

winnt.sif

OemPnPDriversPath="Drivers\Athlon64;Drivers\FP767;Drivers\NVRAID;Drivers\NVLAN"

hardware = msi k8 neo4 ultra