[WindowsPE 2.0 need help.]

I have used these steps over 100 time with sucess, it might me your hardware.

What is the PC that you are using?

What kind of USB drive?

If you burn your bulid to a CD/DVD will it boot?

[WindowsPE 2.0 need help.]

Did you do this?

This must be done from Windows Vista.

Start a command prompt and run the following. This set of commands assumes your USB key is detected as disk 1, you should double check that by doing a list of the disks before cleaning it. If you have multiple hard drives you could end up wiping your second drive using this command. You have been warned.

• Diskpart

• select disk 1

• clean

• create partition primary

• select partition 1

• active

• format fs=NTFS

• assign

• exit

Then just copy All files WinPE CD to the USB Key

[WINPE 2 Netowrk Problems]

I used the drivers from HP SmartStart Scripting Toolkit 1.8 and so far no issues.

http://h18013.www1.hp.com/products/servers...loadtkpage.html

[WinPE 2.0 GimageX COM based HTA]

Looking good, The only issue left is the "Object Required: objFso" in line 24 of the netmap.hta

24 If objFso.FileExists(SysFolder & "\wpeutil.exe") Then
25         Window.ResizeTo 400,170

[WinPE 2.0 GimageX COM based HTA]

I have only found one problem

When Mounting an image the second radio button does not work I get "You must select image first!"

[WinPE 2.0 GimageX COM based HTA]

This is from M$

"When you choose to run a regular format on a volume, files are removed from the volume that you are formatting and the hard disk is scanned for bad sectors. The scan for bad sectors is responsible for the majority of the time that it takes to format a volume.

If you choose the Quick format option, format removes files from the partition, but does not scan the disk for bad sectors. Only use this option if your hard disk has been previously formatted and you are sure that your hard disk is not damaged."

[WinPE 2.0 GimageX COM based HTA]

Just booted to a Box with 4GB of RAM and got the same issue. What size are you making your RAM disk?

[WinPE 2.0 GimageX COM based HTA]

It is real Dell D600 W/ 512MB of RAM. I will try another Laptop later with 2GB.

[WinPE 2.0 GimageX COM based HTA]

I have it in x:\windows\system32 and still getting Access Denied

[Win PE 2.0 Network Problem]

What NIC are you using?

[WinPE 2.0, Sala Password Renew & Locksmith]

I have used this one in WinPE 2.0

NTPWEdit version 0.2 FREEWARE

http://cdslow.webhost.ru/ntpwedit/index_en.html