sewperp

Hi Thanks for the suggestion. Will try. In the meantime i tried the following: [sourceDisksFiles] nvatabus.sys = 1,,,,,,4_,4,1,,,1,4 nvraid.sys = 1,,,,,,4_,4,1,,,1,4 [HardwareIdsDatabase] PCI\VEN_10DE&DEV_008E = "nvatabus" PCI\VEN_10DE&DEV_0085 = "nvatabus" PCI\VEN_10DE&DEV_00D5 = "nvatabus" PCI\VEN_10DE&DEV_00EE = "nvatabus" PCI\VEN_10DE&DEV_00E3 = "nvatabus" PCI\VEN_10DE&DEV_00E5 = "nvatabus" *_NVRAIDBUS = "nvraid" GenNvRaidDisk = "nvraid" [sCSI.load] nvatabus = nvatabus.sys,4 nvraid = nvraid.sys,4 [sCSI] nvatabus = "NVIDIA NForce Storage Controller" nvraid = "NVIDIA RAID CLASS DRIVER" everything works fine, sees partitions etc. However I already have the RAID setup and just to test I allow the setup to get to the patition screen (It never used to get there before) and I press F3 to quit and not continue the setup. Windows restarts and I get the dreaded Blue screen. What is the issue with the nvidia driver? Could it be that I am missing something?

Hi I know this has been talked about in other posts with regards to xpcreate but I would like to know if what i am doing is correct when not using xpcreate and just modifying the winnt.sif and txtsetup.sif files. I have tried the drivers with the F6 setup and they work. My system setup is two 160GB SATA drives with Raid 0. My textsetup.oem gives the following: [scsi] RAIDCLASS = "NVIDIA RAID CLASS DRIVER (required)" BUSDRV = "NVIDIA NForce Storage Controller (required)" [HardwareIds.scsi.RAIDCLASS] id = "GenNvRaidDisk","nvraid" id = "*_NVRAIDBUS","nvraid" [HardwareIds.scsi.BUSDRV] id = "PCI\VEN_10DE&DEV_008E", "nvatabus" id = "PCI\VEN_10DE&DEV_0085", "nvatabus" id = "PCI\VEN_10DE&DEV_00D5", "nvatabus" id = "PCI\VEN_10DE&DEV_00EE", "nvatabus" id = "PCI\VEN_10DE&DEV_00E3", "nvatabus" id = "PCI\VEN_10DE&DEV_00E5", "nvatabus" id = "PCI\VEN_10DE&DEV_0035", "nvatabus" id = "PCI\VEN_10DE&DEV_0036", "nvatabus" id = "PCI\VEN_10DE&DEV_003E", "nvatabus" id = "PCI\VEN_10DE&DEV_0053", "nvatabus" id = "PCI\VEN_10DE&DEV_0054", "nvatabus" id = "PCI\VEN_10DE&DEV_0055", "nvatabus" I have therefore added the following to the end of the txtsetup.sif file: [sourceDisksFiles] nvraid.sys=1,,,,,,3_,4,1 NvAtaBus.sys=1,,,,,,3_,4,1 [HardwareIdsDatabase] GenNvRaidDisk="RAIDCLASS" *_NVRAIDBUS="RAIDCLASS" PCI\VEN_10DE&DEV_008E="BUSDRV" PCI\VEN_10DE&DEV_0085="BUSDRV" PCI\VEN_10DE&DEV_00D5="BUSDRV" PCI\VEN_10DE&DEV_00EE="BUSDRV" PCI\VEN_10DE&DEV_00E3="BUSDRV" PCI\VEN_10DE&DEV_00E5="BUSDRV" PCI\VEN_10DE&DEV_0035="BUSDRV" PCI\VEN_10DE&DEV_0036="BUSDRV" PCI\VEN_10DE&DEV_003E="BUSDRV" PCI\VEN_10DE&DEV_0053="BUSDRV" PCI\VEN_10DE&DEV_0054="BUSDRV" PCI\VEN_10DE&DEV_0055="BUSDRV" [sCSI.load] RAIDCLASS=nvraid.sys,4 BUSDRV=NvAtaBus.sys,4 [scsi] RAIDCLASS = "NVIDIA RAID CLASS DRIVER (required)" BUSDRV = "NVIDIA NForce Storage Controller (required)" Is this correct? The drivers load in the windows setup but after a while a blue screen pops up with errors about windows being shut down to prevent damage. Am I doing something incorrect or am I using the wrong drivers. Please help. Thank You Kindly Pranesh