cubalibre00
Content Type
Profiles
Forums
Events
Posts posted by cubalibre00
-
-
Where is setup.exe /s being called from?
I use VirtuallTek nLite Add-On Maker with "/s" string.
All addons created by this program work fine, but Lan setup addon not.
Some hardware / software reasons that I don't know ?
How are you trying to install epson drivers?I integrate Epson printer driver by nLite as all others my drivers.
But when I on my printer, XP look for Epson driver, so I understand that nLite didn't integrate them.
Why ?
Thanks,
Alessandro
0 -
Hi to all,
I've created some addons between which BroadCom GB LAN driver install and integrated on MCE 2005 with nLite and all except BroadCom GB LAN addon work fine.
I've tried to install after with this string "setup.exe /s" to verify if my silent install text mode was incorrect and the string is correct.
Some suggestions ?
Other problem, I can't integrate Epson CX5400 driver with nLite ?
All the other driver are well intergrated, but Espson printer driver no. Why ?
I've removed with nLite all driver and integrated all my driver.
Thank's,
Alessandro
0 -
Hi to all,
how can I avoid to eliminate the driver yamaha opl3-sa from xp during my nLite slipstream procedure.
I cannot integrate them subsequently because I do not find them (whql) on Internet.
Thanks,
Alessandro
0 -
1. You see that Autologon combo box on the right, select your username there and it will autologon.
2. So what is the point of full name, you want it to be the same as the Username? Then put it like that.
Hi Nuhi,
thank you for replay.
1)Really, I don't want the Autologon, for this in the Autologon combo box (as the image describe) I set 'None', but on my winnt.sif I find set 'yes'.
Why ?
2)With nLite 1.01 on Administrator Tab I put on 'Full Name' -> Cuba Libre and I rename Administrator into Alessandro and all work fine.
But now with nLite 1.2 RC as you can see from the jpg attached, the username is Cuba Libre and not Alessandro.
Please verify,
Alessandro
P.S. With the same last session.ini but different release I find two different installation.
For example, on start up, the logon mask (with nLite 1.2 RC) I find a username Alessandro, but windows show me an error with "Username not found", press 'OK' and the new logon mask is with 'Cuba Libre'.
0 -
Hi to all,
1) Why into my winnt.sif I find Autologon set to yes and into nLite mask does'n set ?
2)I rename Administrator to Alessandro and as Full name 'Cuba Libre'.
After the installation as you can see from the jpg attached, the username is Cuba Libre and not Alessandro, but in 'Documents and Settings' I find 'C:\Documents and Settings\Alessandro'. Why ?
Using nLite 1.0.1 the problem wasn't happen.
Regards,
Alessandro
0 -
Hi,
1) The option 'burn on the fly' don't create a CD/DVD bootable.
2) Windows have standard services stopped.
3) Problem with software installed, adobe reader doesn't work.
4) New nLite is not completly compatible with Media Center.
5) Why if on nLite I decide to keep Media Center, but I want to delete DOTNETFX folder with the nLite option "removing Framework", it removes the NETFX folder ?
MCE need NETFX folder not all two.
6) Why nLite don't put the two string medctr = on and netfx = on if detect the option "keep Media Center" or if understand that is Media center ?
If not, we install XP Pro from a MCE installation.
7) Will can nLite integrate XboxMCEFULL-us.exe ?
8) nLite don't integrate well Internet Explorer 7 RC1.
I used the same .ini but with the new nLite.
However nLite is a big good software, known in all the world.
Alessandro
0 -
I've to put under component of winnt.sif this strings :
[Components]
medctr = on
netfx = on
Alessandro
0 -
....
Yes, I've removed NWLink IPX/SPX/NetBIOS into my slipstream MCE 2005.
With your suggestion, I will tray a new slipstream with "NWLink IPX/SPX/NetBIOS protocoll" abled.
......
Hi,
I had tray, but didn't resolve it.
It's very dificult to understand.
I had tray with event log, but when the installation don't complete, the event says :"Installation completed".
If someone has other suggestion, he's well acepted.
I would like understand, because original MCE 2005 need 30 min, but my slipstream MCE only 15 min and >50 % into hard drive.
Thank you,
Alessandro
0 -
.......
3. Save Dump Utility, so seems that this one should be protected as well.
......
Hi Nuhi,
it works well with your suggestion.
Thank you a lot,
Alessandro
0 -
.........
-> Protocollo NWLink IPX/SPX/NetBIOS ?
..........
Hi,
thank you for rapid answer.
Yes, I've removed NWLink IPX/SPX/NetBIOS into my slipstream MCE 2005.
With your suggestion, I will tray a new slipstream with "NWLink IPX/SPX/NetBIOS protocoll" abled.
Thank you again,
Alessandro
0 -
Hi to all,
I slipstreamed my MCE 2005 with nLite and the OS works very good.
Very very good software nLite.
I've XBOX 360 and I want to connect them.
I use XboxMCEFULL-ITA.exe but the installation wont complete.
If I use an MCE 2005 not slipstreamed I can connect them.
So I think that I slipstreamed my MCE 2005 to much.
I attach the errors and the .ini files.
Can someone tell me what I can't remove to install XboxMCEFULL-ITA.exe ?
Thank you
Alessandro
0 -
Hi to all,
I tried to find answers from this forum and from the Media Center forum, but unfortunately I didn't found them.
Someone can help me ?
1)Why if on nLite I decide to keep Media Center, but I want to delete DOTNETFX folder with the nLite option "removing Framework", it removes the NETFX folder ?
MCE need NETFX folder not all two, or not ?
It's a bug/limitation ?
2)Why nLite don't put the two string medctr = on and
netfx = on if detect the option "keep Media Center" ?
If not, we install XP Pro from a MCE installation.
Or better, nLite need a new option ?
3)I slipstreamed a MCE 2005 installation, but when I start MCE from Start->All Program->Accessories->Media Center an error appear :
ehshell.exe error, DBGENG.DLL not found.
If I put the DBGENG.DLL from the original installation to the ehshell.exe directory of the slipstreamed MCE 2005, MCE works fine.
What I must to keep into the slipstreaming process to avoid this problem ?
Thank you to all,
from Alessandro
P.S:Sorry for my bad English
0
nLite 1.3.5 regression bug "Admin full name was shown instead of
in nLite
Posted
Hi,
it's the second time in the same day that I reinstall MCE2005 to have my user name on logon, but I've always admin full name set.
I uploaded the .ini file.
I hope that someone can tell me what I wrong.
Thanks,
Alessandro
ULTIMA_SESSIONE.INI